From: Luis Chamberlain <mcgrof@kernel.org>
To: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org,
linux-nvdimm@lists.01.org, tj@kernel.org,
akpm@linux-foundation.org, linux-pm@vger.kernel.org,
jiangshanlai@gmail.com, rafael@kernel.org, len.brown@intel.com,
pavel@ucw.cz, zwisler@kernel.org, dan.j.williams@intel.com,
dave.jiang@intel.com, bvanassche@acm.org
Subject: Re: [driver-core PATCH v7 3/9] device core: Consolidate locking and unlocking of parent and device
Date: Fri, 30 Nov 2018 16:01:09 -0800 [thread overview]
Message-ID: <20181201000109.GG28501@garbanzo.do-not-panic.com> (raw)
In-Reply-To: <154345154182.18040.12736221516488918534.stgit@ahduyck-desk1.amr.corp.intel.com>
On Wed, Nov 28, 2018 at 04:32:21PM -0800, Alexander Duyck wrote:
> Try to consolidate all of the locking and unlocking of both the parent and
> device when attaching or removing a driver from a given device.
>
> To do that I first consolidated the lock pattern into two functions
> __device_driver_lock and __device_driver_unlock. After doing that I then
> created functions specific to attaching and detaching the driver while
> acquiring these locks. By doing this I was able to reduce the number of
> spots where we touch need_parent_lock from 12 down to 4.
While this later is true, it gives the impression there are functional
changes but I see none. It can help reviewers / future reviewers of this
commit if its clearly stated that this patch introduces no functional
changes.
> Reviewed-by: Bart Van Assche <bvanassche@acm.org>
> Reviewed-by: Dan Williams <dan.j.williams@intel.com>
> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Luis
> ---
> drivers/base/base.h | 2 +
> drivers/base/bus.c | 23 ++-----------
> drivers/base/dd.c | 91 ++++++++++++++++++++++++++++++++++++++++-----------
> 3 files changed, 77 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/base/base.h b/drivers/base/base.h
> index 7a419a7a6235..3f22ebd6117a 100644
> --- a/drivers/base/base.h
> +++ b/drivers/base/base.h
> @@ -124,6 +124,8 @@ extern int driver_add_groups(struct device_driver *drv,
> const struct attribute_group **groups);
> extern void driver_remove_groups(struct device_driver *drv,
> const struct attribute_group **groups);
> +int device_driver_attach(struct device_driver *drv, struct device *dev);
> +void device_driver_detach(struct device *dev);
>
> extern char *make_class_name(const char *name, struct kobject *kobj);
>
> diff --git a/drivers/base/bus.c b/drivers/base/bus.c
> index 8bfd27ec73d6..8a630f9bd880 100644
> --- a/drivers/base/bus.c
> +++ b/drivers/base/bus.c
> @@ -184,11 +184,7 @@ static ssize_t unbind_store(struct device_driver *drv, const char *buf,
>
> dev = bus_find_device_by_name(bus, NULL, buf);
> if (dev && dev->driver == drv) {
> - if (dev->parent && dev->bus->need_parent_lock)
> - device_lock(dev->parent);
> - device_release_driver(dev);
> - if (dev->parent && dev->bus->need_parent_lock)
> - device_unlock(dev->parent);
> + device_driver_detach(dev);
> err = count;
> }
> put_device(dev);
> @@ -211,13 +207,7 @@ static ssize_t bind_store(struct device_driver *drv, const char *buf,
>
> dev = bus_find_device_by_name(bus, NULL, buf);
> if (dev && dev->driver == NULL && driver_match_device(drv, dev)) {
> - if (dev->parent && bus->need_parent_lock)
> - device_lock(dev->parent);
> - device_lock(dev);
> - err = driver_probe_device(drv, dev);
> - device_unlock(dev);
> - if (dev->parent && bus->need_parent_lock)
> - device_unlock(dev->parent);
> + err = device_driver_attach(drv, dev);
>
> if (err > 0) {
> /* success */
> @@ -769,13 +759,8 @@ EXPORT_SYMBOL_GPL(bus_rescan_devices);
> */
> int device_reprobe(struct device *dev)
> {
> - if (dev->driver) {
> - if (dev->parent && dev->bus->need_parent_lock)
> - device_lock(dev->parent);
> - device_release_driver(dev);
> - if (dev->parent && dev->bus->need_parent_lock)
> - device_unlock(dev->parent);
> - }
> + if (dev->driver)
> + device_driver_detach(dev);
> return bus_rescan_devices_helper(dev, NULL);
> }
> EXPORT_SYMBOL_GPL(device_reprobe);
> diff --git a/drivers/base/dd.c b/drivers/base/dd.c
> index ef3f70a7cb5a..d2515520569e 100644
> --- a/drivers/base/dd.c
> +++ b/drivers/base/dd.c
> @@ -875,6 +875,60 @@ void device_initial_probe(struct device *dev)
> __device_attach(dev, true);
> }
>
> +/*
> + * __device_driver_lock - acquire locks needed to manipulate dev->drv
> + * @dev: Device we will update driver info for
> + * @parent: Parent device. Needed if the bus requires parent lock
> + *
> + * This function will take the required locks for manipulating dev->drv.
> + * Normally this will just be the @dev lock, but when called for a USB
> + * interface, @parent lock will be held as well.
> + */
> +static void __device_driver_lock(struct device *dev, struct device *parent)
> +{
> + if (parent && dev->bus->need_parent_lock)
> + device_lock(parent);
> + device_lock(dev);
> +}
> +
> +/*
> + * __device_driver_unlock - release locks needed to manipulate dev->drv
> + * @dev: Device we will update driver info for
> + * @parent: Parent device. Needed if the bus requires parent lock
> + *
> + * This function will release the required locks for manipulating dev->drv.
> + * Normally this will just be the the @dev lock, but when called for a
> + * USB interface, @parent lock will be released as well.
> + */
> +static void __device_driver_unlock(struct device *dev, struct device *parent)
> +{
> + device_unlock(dev);
> + if (parent && dev->bus->need_parent_lock)
> + device_unlock(parent);
> +}
> +
> +/**
> + * device_driver_attach - attach a specific driver to a specific device
> + * @drv: Driver to attach
> + * @dev: Device to attach it to
> + *
> + * Manually attach driver to a device. Will acquire both @dev lock and
> + * @dev->parent lock if needed.
> + */
> +int device_driver_attach(struct device_driver *drv, struct device *dev)
> +{
> + int ret = 0;
> +
> + __device_driver_lock(dev, dev->parent);
> +
> + if (!dev->driver)
> + ret = driver_probe_device(drv, dev);
> +
> + __device_driver_unlock(dev, dev->parent);
> +
> + return ret;
> +}
> +
> static int __driver_attach(struct device *dev, void *data)
> {
> struct device_driver *drv = data;
> @@ -902,14 +956,7 @@ static int __driver_attach(struct device *dev, void *data)
> return ret;
> } /* ret > 0 means positive match */
>
> - if (dev->parent && dev->bus->need_parent_lock)
> - device_lock(dev->parent);
> - device_lock(dev);
> - if (!dev->driver)
> - driver_probe_device(drv, dev);
> - device_unlock(dev);
> - if (dev->parent && dev->bus->need_parent_lock)
> - device_unlock(dev->parent);
> + device_driver_attach(drv, dev);
>
> return 0;
> }
> @@ -948,15 +995,11 @@ static void __device_release_driver(struct device *dev, struct device *parent)
> drv = dev->driver;
> if (drv) {
> while (device_links_busy(dev)) {
> - device_unlock(dev);
> - if (parent)
> - device_unlock(parent);
> + __device_driver_unlock(dev, parent);
>
> device_links_unbind_consumers(dev);
> - if (parent)
> - device_lock(parent);
>
> - device_lock(dev);
> + __device_driver_lock(dev, parent);
> /*
> * A concurrent invocation of the same function might
> * have released the driver successfully while this one
> @@ -1009,16 +1052,12 @@ void device_release_driver_internal(struct device *dev,
> struct device_driver *drv,
> struct device *parent)
> {
> - if (parent && dev->bus->need_parent_lock)
> - device_lock(parent);
> + __device_driver_lock(dev, parent);
>
> - device_lock(dev);
> if (!drv || drv == dev->driver)
> __device_release_driver(dev, parent);
>
> - device_unlock(dev);
> - if (parent && dev->bus->need_parent_lock)
> - device_unlock(parent);
> + __device_driver_unlock(dev, parent);
> }
>
> /**
> @@ -1043,6 +1082,18 @@ void device_release_driver(struct device *dev)
> }
> EXPORT_SYMBOL_GPL(device_release_driver);
>
> +/**
> + * device_driver_detach - detach driver from a specific device
> + * @dev: device to detach driver from
> + *
> + * Detach driver from device. Will acquire both @dev lock and @dev->parent
> + * lock if needed.
> + */
> +void device_driver_detach(struct device *dev)
> +{
> + device_release_driver_internal(dev, NULL, dev->parent);
> +}
> +
> /**
> * driver_detach - detach driver from all devices it controls.
> * @drv: driver.
>
next prev parent reply other threads:[~2018-12-01 0:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-29 0:32 [driver-core PATCH v7 0/9] Add NUMA aware async_schedule calls Alexander Duyck
2018-11-29 0:32 ` [driver-core PATCH v7 1/9] driver core: Move async_synchronize_full call Alexander Duyck
2018-11-30 23:21 ` Luis Chamberlain
2018-11-29 0:32 ` [driver-core PATCH v7 2/9] driver core: Establish clear order of operations for deferred probe and remove Alexander Duyck
2018-11-29 1:57 ` Dan Williams
2018-11-29 18:07 ` Alexander Duyck
2018-11-29 18:55 ` Dan Williams
2018-11-29 21:53 ` Alexander Duyck
2018-11-29 22:00 ` Dan Williams
2018-11-30 23:40 ` Luis Chamberlain
2018-11-29 0:32 ` [driver-core PATCH v7 3/9] device core: Consolidate locking and unlocking of parent and device Alexander Duyck
2018-12-01 0:01 ` Luis Chamberlain [this message]
2018-11-29 0:32 ` [driver-core PATCH v7 4/9] driver core: Probe devices asynchronously instead of the driver Alexander Duyck
2018-12-01 2:48 ` Luis Chamberlain
2018-12-03 16:44 ` Alexander Duyck
2018-11-29 0:32 ` [driver-core PATCH v7 5/9] workqueue: Provide queue_work_node to queue work near a given NUMA node Alexander Duyck
2018-11-29 0:32 ` [driver-core PATCH v7 6/9] async: Add support for queueing on specific " Alexander Duyck
2018-11-29 0:32 ` [driver-core PATCH v7 7/9] driver core: Attach devices on CPU local to device node Alexander Duyck
2018-11-29 0:32 ` [driver-core PATCH v7 8/9] PM core: Use new async_schedule_dev command Alexander Duyck
2018-11-29 0:32 ` [driver-core PATCH v7 9/9] libnvdimm: Schedule device registration on node local to the device Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181201000109.GG28501@garbanzo.do-not-panic.com \
--to=mcgrof@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=alexander.h.duyck@linux.intel.com \
--cc=bvanassche@acm.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jiangshanlai@gmail.com \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=linux-pm@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=rafael@kernel.org \
--cc=tj@kernel.org \
--cc=zwisler@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome