From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>
Cc: Leo Li <leoyang.li@nxp.com>, "M.h. Lian" <minghuan.lian@nxp.com>,
Xiaowei Bao <xiaowei.bao@nxp.com>,
"Z.q. Hou" <zhiqiang.hou@nxp.com>
Subject: [PATCH 2/2] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451
Date: Sun, 2 Dec 2018 13:32:45 +0000 [thread overview]
Message-ID: <20181202133303.33988-3-Zhiqiang.Hou@nxp.com> (raw)
In-Reply-To: <20181202133303.33988-1-Zhiqiang.Hou@nxp.com>
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
When LX2 PCIe controller is sending multiple split completions and
ACK latency expires indicating that ACK should be send at priority.
But because of large number of split completions and FC update DLLP,
the controller does not give priority to ACK transmission. This
results into ACK latency timer timeout error at the link partner and
the pending TLPs are replayed by the link partner again.
Workaround:
1. Reduce the ACK latency timeout value to a very small value.
2. Restrict the number of completions from the LX2 PCIe controller
to 1, by changing the Max Read Request Size (MRRS) of link partner
to the same value as Max Packet size (MPS).
This patch implemented part 1, the part 2 can be set by kernel parameter
'pci=pcie_bus_perf'
This ERRATA is only for LX2160A Rev1.0, and it will be fixed
in Rev2.0.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
.../pci/controller/mobiveil/pci-layerscape-gen4.c | 14 ++++++++++++++
drivers/pci/controller/mobiveil/pcie-mobiveil.h | 4 ++++
2 files changed, 18 insertions(+)
diff --git a/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
index 1fe56532b288..ef43033e1c2a 100644
--- a/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
+++ b/drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
@@ -220,6 +220,18 @@ static const struct mobiveil_pab_ops ls_pcie_g4_pab_ops = {
.link_up = ls_pcie_g4_link_up,
};
+static void workaround_A011451(struct ls_pcie_g4 *pcie)
+{
+ struct mobiveil_pcie *mv_pci = pcie->pci;
+ u32 val;
+
+ /* Set ACK latency timeout */
+ val = csr_readl(mv_pci, GPEX_ACK_REPLAY_TO);
+ val &= ~(ACK_LAT_TO_VAL_MASK << ACK_LAT_TO_VAL_SHIFT);
+ val |= (4 << ACK_LAT_TO_VAL_SHIFT);
+ csr_writel(mv_pci, val, GPEX_ACK_REPLAY_TO);
+}
+
static int __init ls_pcie_g4_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -259,6 +271,8 @@ static int __init ls_pcie_g4_probe(struct platform_device *pdev)
if (!ls_pcie_g4_is_bridge(pcie))
return -ENODEV;
+ workaround_A011451(pcie);
+
return 0;
}
diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil.h b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
index ef93b41f4419..c75b7c304c46 100644
--- a/drivers/pci/controller/mobiveil/pcie-mobiveil.h
+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil.h
@@ -85,6 +85,10 @@
#define PAB_AXI_AMAP_PEX_WIN_H(win) PAB_REG_ADDR(0x0bac, win)
#define PAB_INTP_AXI_PIO_CLASS 0x474
+#define GPEX_ACK_REPLAY_TO 0x438
+#define ACK_LAT_TO_VAL_MASK 0x1fff
+#define ACK_LAT_TO_VAL_SHIFT 0
+
#define PAB_PEX_AMAP_CTRL(win) PAB_REG_ADDR(0x4ba0, win)
#define AMAP_CTRL_EN_SHIFT 0
#define AMAP_CTRL_TYPE_SHIFT 1
--
2.17.1
next prev parent reply other threads:[~2018-12-02 13:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-02 13:32 [PATCH 0/2] PCI: ls_pcie_g4: add 2 workarounds Z.q. Hou
2018-12-02 13:32 ` [PATCH 1/2] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011577 Z.q. Hou
2018-12-03 21:06 ` Bjorn Helgaas
2018-12-02 13:32 ` Z.q. Hou [this message]
2018-12-03 22:06 ` [PATCH 2/2] PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451 Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181202133303.33988-3-Zhiqiang.Hou@nxp.com \
--to=zhiqiang.hou@nxp.com \
--cc=bhelgaas@google.com \
--cc=l.subrahmanya@mobiveil.co.in \
--cc=leoyang.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=minghuan.lian@nxp.com \
--cc=xiaowei.bao@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®