mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Sinan Kaya <okaya@kernel.org>
Cc: linux-acpi@vger.kernel.org, Hanjun Guo <hanjun.guo@linaro.org>,
	Sudeep Holla <sudeep.holla@arm.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v11 6/7] ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set
Date: Tue, 18 Dec 2018 12:00:07 +0000	[thread overview]
Message-ID: <20181218115959.GA9090@e107981-ln.cambridge.arm.com> (raw)
In-Reply-To: <20181218025606.32668-7-okaya@kernel.org>

On Tue, Dec 18, 2018 at 02:56:05AM +0000, Sinan Kaya wrote:
> Remove PCI dependent code out of iort.c when CONFIG_PCI is not defined.
> A quick search reveals the following functions:
> 1. pci_request_acs()
> 2. pci_domain_nr()
> 3. pci_is_root_bus()
> 4. to_pci_dev()
> 
> Both pci_domain_nr() and pci_is_root_bus() are defined in linux/pci.h.
> pci_domain_nr() is a stub function when CONFIG_PCI is not set and
> pci_is_root_bus() just returns a reference to a structure member which
> is still valid without CONFIG_PCI set.
> 
> to_pci_dev() is a macro that expands to container_of.
> 
> pci_request_acs() is the only code that gets pulled in from drivers/pci/*.c

I am not a big fan of these assumptions but we can stub all code
relying on those behind the CONFIG_PCI guard later, which would result
in cleaner code too.

> 
> Signed-off-by: Sinan Kaya <okaya@kernel.org>
> ---
>  drivers/acpi/arm64/iort.c | 21 ++++++++++++++-------
>  1 file changed, 14 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index 70f4e80b9246..beb7e4c05bf5 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -1435,8 +1435,14 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
>  	return ret;
>  }
>  
> -static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
> +#ifdef CONFIG_PCI
> +static void __init iort_enable_acs(struct acpi_iort_node *iort_node)
>  {
> +	static bool acs_enabled __initdata;
> +
> +	if (acs_enabled)
> +		return;
> +
>  	if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
>  		struct acpi_iort_node *parent;
>  		struct acpi_iort_id_mapping *map;
> @@ -1458,13 +1464,16 @@ static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
>  			if ((parent->type == ACPI_IORT_NODE_SMMU) ||
>  				(parent->type == ACPI_IORT_NODE_SMMU_V3)) {
>  				pci_request_acs();
> -				return true;
> +				acs_enabled = true;
> +				return;
>  			}
>  		}
>  	}
> -
> -	return false;
> +	return;

Remove this return;

With that updated:

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

>  }
> +#else
> +static inline void iort_enable_acs(struct acpi_iort_node *iort_node) { }
> +#endif
>  
>  static void __init iort_init_platform_devices(void)
>  {
> @@ -1472,7 +1481,6 @@ static void __init iort_init_platform_devices(void)
>  	struct acpi_table_iort *iort;
>  	struct fwnode_handle *fwnode;
>  	int i, ret;
> -	bool acs_enabled = false;
>  	const struct iort_dev_config *ops;
>  
>  	/*
> @@ -1493,8 +1501,7 @@ static void __init iort_init_platform_devices(void)
>  			return;
>  		}
>  
> -		if (!acs_enabled)
> -			acs_enabled = iort_enable_acs(iort_node);
> +		iort_enable_acs(iort_node);
>  
>  		ops = iort_get_dev_cfg(iort_node);
>  		if (ops) {
> -- 
> 2.19.0
> 

  parent reply	other threads:[~2018-12-18 12:00 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20181218025606.32668-1-okaya@kernel.org>
2018-12-18  2:56 ` [PATCH v11 1/7] ACPI: Allow CONFIG_PCI to be unset for reboot Sinan Kaya
2018-12-18  7:31   ` Christoph Hellwig
2018-12-19 22:21     ` Sinan Kaya
2018-12-18  2:56 ` [PATCH v11 2/7] ACPI / OSL: Stub out acpi_os_(read/write)_pci_configurations() Sinan Kaya
2018-12-18  7:32   ` Christoph Hellwig
2018-12-19 22:22     ` Sinan Kaya
2018-12-18  2:56 ` [PATCH v11 3/7] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set Sinan Kaya
2018-12-18  2:56 ` [PATCH v11 4/7] ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset Sinan Kaya
2018-12-18  2:56 ` [PATCH v11 5/7] arm64: select ACPI PCI code only both features are enabled Sinan Kaya
2018-12-18  2:56 ` [PATCH v11 6/7] ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set Sinan Kaya
2018-12-18  7:44   ` Hanjun Guo
2018-12-18 12:00   ` Lorenzo Pieralisi [this message]
2018-12-18  2:56 ` [PATCH v11 7/7] ACPI: Make PCI slot detection driver depend on PCI Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181218115959.GA9090@e107981-ln.cambridge.arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=hanjun.guo@linaro.org \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=okaya@kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®