From: Joakim Zhang <qiangqing.zhang@nxp.com>
To: "mkl@pengutronix.de" <mkl@pengutronix.de>,
"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>
Cc: "wg@grandegger.com" <wg@grandegger.com>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
Joakim Zhang <qiangqing.zhang@nxp.com>
Subject: [PATCH 0/3] can: flexcan: add imx8qm support
Date: Wed, 19 Dec 2018 08:38:57 +0000 [thread overview]
Message-ID: <20181219083637.641-1-qiangqing.zhang@nxp.com> (raw)
This patch set intends to add Flexcan support for i.MX8QM platform which
defaultly supports CAN FD protocol. Although BRS enabled by system reset
when the driver sets CAN FD mode, now this patch serial does not support
BRS in the driver. And then I will send patch to enable BRS by changing the
register to set bit timing.
Dong Aisheng (3):
can: rx-offload: add CANFD support based on offload
can: flexcan: add CAN FD mode support
can: flexcan: add imx8qm support
drivers/net/can/flexcan.c | 114 ++++++++++++++++++++++++++++++---
drivers/net/can/rx-offload.c | 16 +++--
include/linux/can/rx-offload.h | 4 +-
3 files changed, 117 insertions(+), 17 deletions(-)
--
2.17.1
next reply other threads:[~2018-12-19 8:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-19 8:38 Joakim Zhang [this message]
2018-12-19 8:39 ` [PATCH 1/3] can: rx-offload: add CANFD support based on offload Joakim Zhang
2018-12-19 8:39 ` [PATCH 2/3] can: flexcan: add CAN FD mode support Joakim Zhang
2018-12-19 8:39 ` [PATCH 3/3] can: flexcan: add imx8qm support Joakim Zhang
2019-01-17 6:28 ` [PATCH 0/3] " Joakim Zhang
2019-02-14 9:58 ` Joakim Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181219083637.641-1-qiangqing.zhang@nxp.com \
--to=qiangqing.zhang@nxp.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®