From: Cheng-Yi Chiang <cychiang@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Benson Leung <bleung@chromium.org>,
Guenter Roeck <groeck@chromium.org>,
Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>,
alsa-devel@alsa-project.org, dgreid@chromium.org,
tzungbi@chromium.org, Rohit kumar <rohitkr@codeaurora.org>,
Cheng-Yi Chiang <cychiang@chromium.org>
Subject: [PATCH v3 1/3] mfd: cros_ec: Add commands to control codec
Date: Wed, 26 Dec 2018 15:03:15 +0800 [thread overview]
Message-ID: <20181226070317.72022-1-cychiang@chromium.org> (raw)
Add EC host commands to control codec on EC.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
Note: This patch is merged to mfd tree for-mfd-next branch already.
But this is still needed on sound tree for-next branch in order to
compile cros_ec_codec driver.
include/linux/mfd/cros_ec_commands.h | 94 ++++++++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 9a9631f0559e2..fc91082d4c357 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2790,6 +2790,100 @@ struct ec_response_battery_vendor_param {
uint32_t value;
} __packed;
+/*****************************************************************************/
+/* Commands for I2S recording on audio codec. */
+
+#define EC_CMD_CODEC_I2S 0x00BC
+
+enum ec_codec_i2s_subcmd {
+ EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
+ EC_CODEC_SET_GAIN = 0x1,
+ EC_CODEC_GET_GAIN = 0x2,
+ EC_CODEC_I2S_ENABLE = 0x3,
+ EC_CODEC_I2S_SET_CONFIG = 0x4,
+ EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
+ EC_CODEC_I2S_SET_BCLK = 0x6,
+};
+
+enum ec_sample_depth_value {
+ EC_CODEC_SAMPLE_DEPTH_16 = 0,
+ EC_CODEC_SAMPLE_DEPTH_24 = 1,
+};
+
+enum ec_i2s_config {
+ EC_DAI_FMT_I2S = 0,
+ EC_DAI_FMT_RIGHT_J = 1,
+ EC_DAI_FMT_LEFT_J = 2,
+ EC_DAI_FMT_PCM_A = 3,
+ EC_DAI_FMT_PCM_B = 4,
+ EC_DAI_FMT_PCM_TDM = 5,
+};
+
+struct ec_param_codec_i2s {
+ /*
+ * enum ec_codec_i2s_subcmd
+ */
+ uint8_t cmd;
+ union {
+ /*
+ * EC_CODEC_SET_SAMPLE_DEPTH
+ * Value should be one of ec_sample_depth_value.
+ */
+ uint8_t depth;
+
+ /*
+ * EC_CODEC_SET_GAIN
+ * Value should be 0~43 for both channels.
+ */
+ struct ec_param_codec_i2s_set_gain {
+ uint8_t left;
+ uint8_t right;
+ } __packed gain;
+
+ /*
+ * EC_CODEC_I2S_ENABLE
+ * 1 to enable, 0 to disable.
+ */
+ uint8_t i2s_enable;
+
+ /*
+ * EC_CODEC_I2S_SET_COFNIG
+ * Value should be one of ec_i2s_config.
+ */
+ uint8_t i2s_config;
+
+ /*
+ * EC_CODEC_I2S_SET_TDM_CONFIG
+ * Value should be one of ec_i2s_config.
+ */
+ struct ec_param_codec_i2s_tdm {
+ /*
+ * 0 to 496
+ */
+ int16_t ch0_delay;
+ /*
+ * -1 to 496
+ */
+ int16_t ch1_delay;
+ uint8_t adjacent_to_ch0;
+ uint8_t adjacent_to_ch1;
+ } __packed tdm_param;
+
+ /*
+ * EC_CODEC_I2S_SET_BCLK
+ */
+ uint32_t bclk;
+ };
+} __packed;
+
+/*
+ * For subcommand EC_CODEC_GET_GAIN.
+ */
+struct ec_response_codec_gain {
+ uint8_t left;
+ uint8_t right;
+} __packed;
+
/*****************************************************************************/
/* System commands */
--
2.20.1.415.g653613c723-goog
next reply other threads:[~2018-12-26 7:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-26 7:03 Cheng-Yi Chiang [this message]
2018-12-26 7:03 ` [PATCH v3 2/3] ASoC: Documentation: Add google,cros-ec-codec Cheng-Yi Chiang
2018-12-26 7:03 ` [PATCH v3 3/3] ASoC: cros_ec_codec: Add codec driver for Cros EC Cheng-Yi Chiang
2019-01-16 6:18 ` [alsa-devel] " Guenter Roeck
2019-01-16 22:59 ` Guenter Roeck
2019-01-17 4:25 ` Cheng-yi Chiang
2019-01-17 4:34 ` Guenter Roeck
2019-01-18 9:05 ` Cheng-yi Chiang
2019-01-07 19:24 ` [PATCH v3 1/3] mfd: cros_ec: Add commands to control codec Mark Brown
2019-01-08 9:54 ` Lee Jones
2019-01-08 16:12 ` Mark Brown
[not found] ` <CAFv8NwK4=m1ffsyTruMPw534FVK6QBeaMKxxW461aS_yNYugNg@mail.gmail.com>
2019-01-28 6:50 ` Lee Jones
2019-01-29 6:54 ` Cheng-yi Chiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181226070317.72022-1-cychiang@chromium.org \
--to=cychiang@chromium.org \
--cc=alsa-devel@alsa-project.org \
--cc=bleung@chromium.org \
--cc=broonie@kernel.org \
--cc=dgreid@chromium.org \
--cc=groeck@chromium.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rohitkr@codeaurora.org \
--cc=tzungbi@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®