On Fri, Jan 04, 2019 at 01:04:21AM +0530, b-ak wrote: > On Thu, Jan 03, 2019 at 12:45:54PM +0000, Mark Brown wrote: > > On Wed, Jan 02, 2019 at 10:36:33PM +0530, b-ak wrote: > > > During the bootup of the kernel, as soon as the DAPM framework kicks in > > > it pushes the codec into standy mode. > > > > > > The existing TVL320AIC32x4 codec driver doesn't prepare the clock in > > > the probe function. > > > This leads to an OOPS when the DAPM tries to put it into standy by calling > > > clk_disable_unprepare() > > > > > > This patch fixes that problem. > > > > This isn't the best way of fixing this because it makes it look like > > there's a missing disable in the removal process. What would be better > > would be to do what other drivers do and check to see what state we're > > transitioning from before we disable the clock in set_bias_level(). See > > drivers like wm8903.c for examples. > > Hello Mark, > > I will test the change and update the patch. > > Thanks, > Bhargav > Hi Mark, I have updated the patch with the changes. Regards, Bhargav