From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.0 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id B0A98C43444 for ; Wed, 9 Jan 2019 15:03:06 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 8071F2070B for ; Wed, 9 Jan 2019 15:03:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1732224AbfAIPDG (ORCPT ); Wed, 9 Jan 2019 10:03:06 -0500 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:55600 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731953AbfAIPDD (ORCPT ); Wed, 9 Jan 2019 10:03:03 -0500 Received: by wens.csie.org (Postfix, from userid 1000) id 523375FCE1; Wed, 9 Jan 2019 23:03:00 +0800 (CST) From: Chen-Yu Tsai To: Maxime Ripard Cc: Chen-Yu Tsai , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH 3/5] ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix WiFi regulator definitions Date: Wed, 9 Jan 2019 23:02:55 +0800 Message-Id: <20190109150257.12602-4-wens@csie.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190109150257.12602-1-wens@csie.org> References: <20190109150257.12602-1-wens@csie.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The design of the Bananapi M2 Ultra has both DLDO1 and DLDO2 regulators provide power to the WiFi+BT module, which is based on the Broadcom BCM43438 or BCM43430 chip. Each regulator output from the PMIC can supply up to 200 mA. The datasheet of the chip suggests a maximum power draw of up to 360 mA when transmitting, thus requiring two outputs from the PMIC to handle the load. However the device tree only references one of them, leaving the other unused and possibly turned off. This patch marks both as always-on, since we don't have a proper binding to specify two regulators as "bound together". The name and constraints of DLDO2 are also added. Fixes: da7ac948fa93 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Ultra") Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 438b7b44dab3..1a6794e63b90 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -250,12 +250,27 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + ®_dldo4 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; -- 2.20.1