From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Vladimir Zapolskiy <vz@mleia.com>,
Sylvain Lemieux <slemieux.tyco@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH] ARM: lpc32xx: debug: add low-level debug support on hsuart
Date: Mon, 14 Jan 2019 22:16:23 +0100 [thread overview]
Message-ID: <20190114211623.6069-1-alexandre.belloni@bootlin.com> (raw)
The lpc32xx has UARTs that are not 8250 compatible. Add support for low
level debugging on those high speed UARTs.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/Kconfig.debug | 18 +++++++++++++++---
arch/arm/include/debug/lpc32xx_hsuart.S | 22 ++++++++++++++++++++++
2 files changed, 37 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/include/debug/lpc32xx_hsuart.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 6d6e0330930b..0d4d64f5d3b7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -530,7 +530,16 @@ choice
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on NXP LPC32xx based platforms.
+ on NXP LPC32xx based platforms using an INS16Cx50 compatible
+ UART.
+
+ config DEBUG_LPC32XX_HSUART
+ bool "Kernel low-level debugging messages via NXP LPC32xx High Speed UART"
+ depends on ARCH_LPC32XX
+ help
+ Say Y here if you want kernel low-level debugging support
+ on NXP LPC32xx based platforms using an high speed (14-clock)
+ UART.
config DEBUG_MESON_UARTAO
bool "Kernel low-level debugging via Meson6 UARTAO"
@@ -1541,6 +1550,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6UL_UART || \
DEBUG_IMX7D_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
+ default "debug/lpc32xx_hsuart.S" if DEBUG_LPC32XX_HSUART
default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
@@ -1622,6 +1632,7 @@ config DEBUG_UART_PHYS
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x3f201000 if DEBUG_BCM2836
default 0x4000e400 if DEBUG_LL_UART_EFM32
+ default 0x40014000 if DEBUG_LPC32XX_HSUART
default 0x40028000 if DEBUG_AT91_SAMV7_USART1
default 0x40081000 if DEBUG_LPC18XX_UART0
default 0x40090000 if DEBUG_LPC32XX
@@ -1716,7 +1727,7 @@ config DEBUG_UART_PHYS
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART
+ DEBUG_AT91_UART || DEBUG_LPC32XX_HSUART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@@ -1741,6 +1752,7 @@ config DEBUG_UART_VIRT
default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART
default 0xf31004c0 if DEBUG_MESON_UARTAO
+ default 0xf4014000 if DEBUG_LPC32XX_HSUART
default 0xf4090000 if DEBUG_LPC32XX
default 0xf4200000 if DEBUG_GEMINI
default 0xf6200000 if DEBUG_PXA_UART1
@@ -1832,7 +1844,7 @@ config DEBUG_UART_VIRT
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART
+ DEBUG_AT91_UART || DEBUG_LPC32XX_HSUART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/include/debug/lpc32xx_hsuart.S b/arch/arm/include/debug/lpc32xx_hsuart.S
new file mode 100644
index 000000000000..e0205368c6ff
--- /dev/null
+++ b/arch/arm/include/debug/lpc32xx_hsuart.S
@@ -0,0 +1,22 @@
+#define LPC_HSU_TX (0x0)
+#define LPC_HSU_LEVEL (0x4)
+#define LPC_HSU_LEVEL_TX 0xFF00
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address)
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address)
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #(LPC_HSU_TX)]
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #(LPC_HSU_LEVEL)]
+ ands \rd, \rd, LPC_HSU_LEVEL_TX
+ bne 1001b
+ .endm
+
--
2.20.1
next reply other threads:[~2019-01-14 21:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-14 21:16 Alexandre Belloni [this message]
2019-01-14 21:27 ` Alexandre Belloni
2019-10-10 20:49 Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190114211623.6069-1-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=slemieux.tyco@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vz@mleia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®