From: Dave Young <dyoung@redhat.com>
To: Kairui Song <kasong@redhat.com>
Cc: linux-kernel@vger.kernel.org, tglx@linutronix.de,
mingo@redhat.com, bp@alien8.de, hpa@zytor.com, x86@kernel.org,
akpm@linux-foundation.org, robert.moore@intel.com,
erik.schmauss@intel.com, rafael.j.wysocki@intel.com,
lenb@kernel.org
Subject: Re: [PATCH 2/2] x86, kexec_file_load: make it work with efi=noruntime or efi=oldmap
Date: Tue, 15 Jan 2019 16:42:13 +0800 [thread overview]
Message-ID: <20190115084213.GA6468@dhcp-128-65.nay.redhat.com> (raw)
In-Reply-To: <20190109064727.27936-1-kasong@redhat.com>
On 01/09/19 at 02:47pm, Kairui Song wrote:
> When efi=noruntime or efi=oldmap is used, EFI services won't be available
> in the second kernel, therefore the second kernel will not be able to get
> the ACPI RSDP address from firmware by calling EFI services and won't
> boot. Previously we are expecting the user to set the acpi_rsdp=<addr>
> on kernel command line for second kernel as there was no way to pass RSDP
> address to second kernel.
>
> After commit e6e094e053af ('x86/acpi, x86/boot: Take RSDP address from
> boot params if available'), now it's possible to set a acpi_rsdp_addr
> parameter in the boot_params passed to second kernel, this commit make
> use of it, detect and set the RSDP address when it's required for second
> kernel to boot.
>
> Tested with an EFI enabled KVM VM with efi=noruntime.
>
> Suggested-by: Dave Young <dyoung@redhat.com>
> Signed-off-by: Kairui Song <kasong@redhat.com>
> ---
> arch/x86/kernel/kexec-bzimage64.c | 21 +++++++++++++++++++++
> drivers/acpi/acpica/tbxfroot.c | 3 +--
> include/acpi/acpixf.h | 2 +-
> 3 files changed, 23 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
> index 53917a3ebf94..0a90dcbd041f 100644
> --- a/arch/x86/kernel/kexec-bzimage64.c
> +++ b/arch/x86/kernel/kexec-bzimage64.c
> @@ -20,6 +20,7 @@
> #include <linux/mm.h>
> #include <linux/efi.h>
> #include <linux/verification.h>
> +#include <linux/acpi.h>
>
> #include <asm/bootparam.h>
> #include <asm/setup.h>
> @@ -255,8 +256,28 @@ setup_boot_parameters(struct kimage *image, struct boot_params *params,
> /* Setup EFI state */
> setup_efi_state(params, params_load_addr, efi_map_offset, efi_map_sz,
> efi_setup_data_offset);
> +
> +#ifdef CONFIG_ACPI
> + /* Setup ACPI RSDP pointer in case EFI is not available in second kernel */
> + if (!acpi_disabled && (!efi_enabled(EFI_RUNTIME_SERVICES) || efi_enabled(EFI_OLD_MEMMAP))) {
> + /* Copied from acpi_os_get_root_pointer accordingly */
> + params->acpi_rsdp_addr = boot_params.acpi_rsdp_addr;
> + if (!params->acpi_rsdp_addr) {
> + if (efi_enabled(EFI_CONFIG_TABLES)) {
> + if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
> + params->acpi_rsdp_addr = efi.acpi20;
> + else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
> + params->acpi_rsdp_addr = efi.acpi;
> + } else if (IS_ENABLED(CONFIG_ACPI_LEGACY_TABLES_LOOKUP)) {
> + acpi_find_root_pointer(¶ms->acpi_rsdp_addr);
> + }
> + }
> + if (!params->acpi_rsdp_addr)
> + pr_warn("RSDP is not available for second kernel\n");
> + }
> #endif
>
> +#endif
> /* Setup EDD info */
> memcpy(params->eddbuf, boot_params.eddbuf,
> EDDMAXNR * sizeof(struct edd_info));
> diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c
> index 483d0ce5180a..dac1e34a931c 100644
> --- a/drivers/acpi/acpica/tbxfroot.c
> +++ b/drivers/acpi/acpica/tbxfroot.c
> @@ -108,8 +108,7 @@ acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp)
> *
> ******************************************************************************/
>
> -acpi_status ACPI_INIT_FUNCTION
> -acpi_find_root_pointer(acpi_physical_address *table_address)
> +acpi_status acpi_find_root_pointer(acpi_physical_address *table_address)
> {
> u8 *table_ptr;
> u8 *mem_rover;
> diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
> index 7aa38b648564..869d75ecaf7d 100644
> --- a/include/acpi/acpixf.h
> +++ b/include/acpi/acpixf.h
> @@ -474,7 +474,7 @@ ACPI_EXTERNAL_RETURN_STATUS(acpi_status ACPI_INIT_FUNCTION
> ACPI_EXTERNAL_RETURN_STATUS(acpi_status ACPI_INIT_FUNCTION
> acpi_reallocate_root_table(void))
>
> -ACPI_EXTERNAL_RETURN_STATUS(acpi_status ACPI_INIT_FUNCTION
> +ACPI_EXTERNAL_RETURN_STATUS(acpi_status
> acpi_find_root_pointer(acpi_physical_address
> *rsdp_address))
> ACPI_EXTERNAL_RETURN_STATUS(acpi_status
> --
> 2.20.1
>
Kairui, thanks for the patches, did a test, it works for me.
Seems the two patches are not in a thread, can you resend them together?
Dave
next prev parent reply other threads:[~2019-01-15 8:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-09 6:47 Kairui Song
2019-01-09 6:55 ` Kairui Song
2019-01-15 8:42 ` Dave Young [this message]
2019-01-16 21:39 ` Schmauss, Erik
2019-01-16 21:58 ` Jung-uk Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190115084213.GA6468@dhcp-128-65.nay.redhat.com \
--to=dyoung@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=bp@alien8.de \
--cc=erik.schmauss@intel.com \
--cc=hpa@zytor.com \
--cc=kasong@redhat.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=rafael.j.wysocki@intel.com \
--cc=robert.moore@intel.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®