mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Chao Fan <fanc.fnst@cn.fujitsu.com>
Cc: linux-kernel@vger.kernel.org, x86@kernel.org, tglx@linutronix.de,
	mingo@redhat.com, hpa@zytor.com, keescook@chromium.org,
	bhe@redhat.com, msys.mizuma@gmail.com,
	indou.takao@jp.fujitsu.com, caoj.fnst@cn.fujitsu.com
Subject: Re: [PATCH v15 5/6] x86/boot: Parse SRAT address from RSDP and store immovable memory
Date: Wed, 16 Jan 2019 12:01:58 +0100	[thread overview]
Message-ID: <20190116110158.GC15409@zn.tnic> (raw)
In-Reply-To: <20190107032243.25324-6-fanc.fnst@cn.fujitsu.com>

On Mon, Jan 07, 2019 at 11:22:42AM +0800, Chao Fan wrote:
> SRAT should be parsed by RSDP to fix the conflict between KASLR and
> memory-hotremove, then find the immovable memory regions and store
> them in an array called immovable_mem[]. With immovable_mem[], KASLR
> can avoid to extract kernel to specific regions.
> 
> Since 'RANDOMIZE_BASE' && 'MEMORY_HOTREMOVE' is needed, introduce
> 'CONFIG_EARLY_SRAT_PARSE' to make ifdeffery clear.
> 
> Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
> ---
>  arch/x86/Kconfig                  |  12 +++
>  arch/x86/boot/compressed/Makefile |   2 +
>  arch/x86/boot/compressed/acpi.c   | 138 ++++++++++++++++++++++++++++++
>  arch/x86/boot/compressed/kaslr.c  |   4 -
>  arch/x86/boot/compressed/misc.h   |  19 ++++
>  5 files changed, 171 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index ba7e3464ee92..c1457609f2e3 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -2149,6 +2149,18 @@ config X86_NEED_RELOCS
>  	def_bool y
>  	depends on RANDOMIZE_BASE || (X86_32 && RELOCATABLE)
>  
> +config EARLY_SRAT_PARSE
> +	bool "EARLY SRAT parsing"
> +	def_bool y
> +	depends on RANDOMIZE_BASE && MEMORY_HOTREMOVE
> +	help
> +	  This option enables early SRAT parsing in compressed boot stage
> +	  so that memory hot-remove ranges do not overlap with KASLR
> +	  chosen ranges. Kernel won't be extracted in hot-removable
> +	  memory, so that make sure memory-hotremove works well with
> +	  KASLR enabled.
> +	  Say Y if you want to use both KASLR and memory-hotremove.
> +

One argument for Ingo's suggestion to have this enabled unconditionally
is all the other code needing RSDP. It might be easier to have it always
built-in instead of a long "depends on" line in Kconfig. We'll see.

>  config PHYSICAL_ALIGN
>  	hex "Alignment value to which kernel should be aligned"
>  	default "0x200000"
> diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
> index 466f66c8a7f8..23491d74939d 100644
> --- a/arch/x86/boot/compressed/Makefile
> +++ b/arch/x86/boot/compressed/Makefile
> @@ -84,6 +84,8 @@ ifdef CONFIG_X86_64
>  	vmlinux-objs-y += $(obj)/pgtable_64.o
>  endif
>  
> +vmlinux-objs-$(CONFIG_EARLY_SRAT_PARSE) += $(obj)/acpi.o
> +
>  $(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone
>  
>  vmlinux-objs-$(CONFIG_EFI_STUB) += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o \
> diff --git a/arch/x86/boot/compressed/acpi.c b/arch/x86/boot/compressed/acpi.c
> index e9dd84f459ed..f7a9e9cbd254 100644
> --- a/arch/x86/boot/compressed/acpi.c
> +++ b/arch/x86/boot/compressed/acpi.c
> @@ -5,6 +5,7 @@
>  #include "../string.h"
>  
>  #include <linux/acpi.h>
> +#include <linux/numa.h>
>  #include <linux/efi.h>
>  #include <asm/efi.h>
>  
> @@ -14,6 +15,19 @@
>   */
>  #define MAX_HEX_ADDRESS_STRING_LEN 19
>  
> +/*
> + * Longest parameter of 'acpi=' in cmldine is 'copy_dsdt', so max length
> + * is 10, which contains '\0' for termination.
> + */
> +#define MAX_ACPI_ARG_LENGTH 10
> +
> +/*
> + * Information of immovable memory regions.
> + * Max amount of memory regions is MAX_NUMNODES*2, so need such array
> + * to place immovable memory regions if all of the memory is immovable.
> + */
> +struct mem_vector immovable_mem[MAX_NUMNODES*2];
> +
>  static acpi_physical_address get_acpi_rsdp(void)
>  {
>  #ifdef CONFIG_KEXEC
> @@ -197,3 +211,127 @@ static acpi_physical_address bios_get_rsdp_addr(void)
>  	}
>  	return 0;
>  }
> +
> +/* Determine RSDP, based on acpi_os_get_root_pointer(). */
> +static acpi_physical_address get_rsdp_addr(void)
> +{
> +	acpi_physical_address pa;
> +
> +	pa = get_acpi_rsdp();
> +
> +	if (!pa)
> +		pa = efi_get_rsdp_addr();
> +
> +	if (!pa)
> +		pa = bios_get_rsdp_addr();
> +
> +	return pa;
> +}
> +
> +/* Compute SRAT address from RSDP. */
> +static struct acpi_table_header *get_acpi_srat_table(void)
> +{
> +	acpi_physical_address acpi_table;
> +	acpi_physical_address root_table;
> +	struct acpi_table_header *header;
> +	struct acpi_table_rsdp *rsdp;
> +	u32 num_entries;
> +	char arg[10];
> +	u8 *entry;
> +	u32 size;
> +	u32 len;
> +
> +	rsdp = (struct acpi_table_rsdp *)(long)get_rsdp_addr();
> +	if (!rsdp)
> +		return NULL;
> +
> +	/* Get RSDT or XSDT from RSDP. */
> +	if (!(cmdline_find_option("acpi", arg, sizeof(arg)) == 4 &&
> +	    !strncmp(arg, "rsdt", 4)) &&
> +	    rsdp->xsdt_physical_address &&
> +	    rsdp->revision > 1) {
> +		root_table = rsdp->xsdt_physical_address;
> +		size = ACPI_XSDT_ENTRY_SIZE;
> +	} else {
> +		root_table = rsdp->rsdt_physical_address;
> +		size = ACPI_RSDT_ENTRY_SIZE;
> +	}
> +
> +	/* Get ACPI root table from RSDT or XSDT.*/

This comment is wrong here - should be above.

> +	if (!root_table)
> +		return NULL;

<---- newline here.

> +	header = (struct acpi_table_header *)(long)root_table;
> +
> +	len = header->length;
> +	if (len < sizeof(struct acpi_table_header) + size)
> +		return NULL;
> +
> +	num_entries = (u32)((len - sizeof(struct acpi_table_header)) / size);
> +	entry = ACPI_ADD_PTR(u8, header, sizeof(struct acpi_table_header));
> +
> +	while (num_entries--) {
> +		u64 address64;
> +
> +		if (size == ACPI_RSDT_ENTRY_SIZE)
> +			acpi_table =  *ACPI_CAST_PTR(u32, entry);
> +		else {
> +			address64 = *(u64 *)entry;
> +			acpi_table = address64;

The same thing as in the previous patch - get rid of address64.

> +		}
> +
> +		if (acpi_table) {
> +			header = (struct acpi_table_header *)(long)acpi_table;
> +
> +			if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_SRAT))
> +				return header;
> +		}
> +		entry += size;
> +	}
> +	return NULL;
> +}
> +
> +/*
> + * According to ACPI table, filter the immovable memory regions
> + * and store them in immovable_mem[].
> + */
> +void get_immovable_mem(void)
> +{
> +	struct acpi_table_header *table_header;
> +	struct acpi_subtable_header *table;
> +	struct acpi_srat_mem_affinity *ma;
> +	char arg[MAX_ACPI_ARG_LENGTH];
> +	unsigned long table_end;
> +	int i = 0;
> +
> +	if (cmdline_find_option("acpi", arg, sizeof(arg)) == 3 &&
> +	    !strncmp(arg, "off", 3))
> +		return;
> +
> +	table_header = get_acpi_srat_table();
> +	if (!table_header)
> +		return;
> +
> +	table_end = (unsigned long)table_header + table_header->length;
> +	table = (struct acpi_subtable_header *)
> +		((unsigned long)table_header + sizeof(struct acpi_table_srat));
> +
> +	while (((unsigned long)table) +
> +		       sizeof(struct acpi_subtable_header) < table_end) {
> +		if (table->type == ACPI_SRAT_TYPE_MEMORY_AFFINITY) {
> +			ma = (struct acpi_srat_mem_affinity *)table;
> +			if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) {
> +				immovable_mem[i].start = ma->base_address;
> +				immovable_mem[i].size = ma->length;
> +				i++;
> +			}
> +
> +			if (i >= MAX_NUMNODES*2) {
> +				debug_putstr("Too many immovable memory regions, aborting.\n");
> +				return;
> +			}
> +		}
> +		table = (struct acpi_subtable_header *)
> +			((unsigned long)table + table->length);

That's a lot of unnecessary casting AFAICT. You can return an unsigned
long from get_acpi_srat_table() and get rid of all that casting here.


> +	}
> +	num_immovable_mem = i;
> +}
> diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
> index 9ed9709d9947..b251572e77af 100644
> --- a/arch/x86/boot/compressed/kaslr.c
> +++ b/arch/x86/boot/compressed/kaslr.c
> @@ -87,10 +87,6 @@ static unsigned long get_boot_seed(void)
>  #define KASLR_COMPRESSED_BOOT
>  #include "../../lib/kaslr.c"
>  
> -struct mem_vector {
> -	unsigned long long start;
> -	unsigned long long size;
> -};
>  
>  /* Only supporting at most 4 unusable memmap regions with kaslr */
>  #define MAX_MEMMAP_REGIONS	4
> diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
> index a1d5918765f3..b49748366a5b 100644
> --- a/arch/x86/boot/compressed/misc.h
> +++ b/arch/x86/boot/compressed/misc.h
> @@ -77,6 +77,11 @@ void choose_random_location(unsigned long input,
>  			    unsigned long *output,
>  			    unsigned long output_size,
>  			    unsigned long *virt_addr);
> +struct mem_vector {
> +	unsigned long long start;
> +	unsigned long long size;
> +};
> +
>  /* cpuflags.c */
>  bool has_cpuflag(int flag);
>  #else
> @@ -116,3 +121,17 @@ static inline void console_init(void)
>  void set_sev_encryption_mask(void);
>  
>  #endif
> +
> +/* acpi.c */
> +#ifdef CONFIG_RANDOMIZE_BASE
> +/* Amount of immovable memory regions */
> +int num_immovable_mem;
> +#endif
> +
> +#ifdef CONFIG_EARLY_SRAT_PARSE
> +void get_immovable_mem(void);
> +#else
> +static void get_immovable_mem(void)
> +{
> +}

Put those on a single line:

static void get_immovable_mem(void) {}

> +#endif
> -- 
> 2.20.1
> 
> 
> 

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

  parent reply	other threads:[~2019-01-16 11:02 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-07  3:22 [PATCH v15 0/6] x86/boot/KASLR: Parse ACPI table and limit KASLR to choosing " Chao Fan
2019-01-07  3:22 ` [PATCH v15 1/6] x86/boot: Copy kstrtoull() to boot/string.c instead of using simple_strtoull() Chao Fan
2019-01-09 12:48   ` Borislav Petkov
2019-01-10  1:15     ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 2/6] x86/boot: Introduce get_acpi_rsdp() to parse RSDP in cmdline from KEXEC Chao Fan
2019-01-10 17:01   ` Borislav Petkov
2019-01-11  1:17     ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 3/6] x86/boot: Introduce efi_get_rsdp_addr() to find RSDP from EFI table Chao Fan
2019-01-10 21:15   ` Borislav Petkov
2019-01-11  1:23     ` Chao Fan
2019-01-11 10:32       ` Borislav Petkov
2019-01-13  9:47         ` Chao Fan
2019-01-13 11:05           ` Borislav Petkov
2019-01-14  1:26             ` Chao Fan
2019-01-14  9:07               ` Borislav Petkov
2019-01-15  7:21                 ` Chao Fan
2019-01-15  9:55                   ` Borislav Petkov
2019-01-16  3:26                     ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 4/6] x86/boot: Introduce bios_get_rsdp_addr() to search RSDP in memory Chao Fan
2019-01-10 21:27   ` Borislav Petkov
2019-01-11  1:27     ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 5/6] x86/boot: Parse SRAT address from RSDP and store immovable memory Chao Fan
2019-01-16  7:28   ` Kairui Song
2019-01-17  1:42     ` Chao Fan
     [not found]     ` <20190117062451.GA588@localhost.localdomain>
2019-01-17  7:57       ` Chao Fan
2019-01-17  8:22         ` Kairui Song
2019-01-17  9:06           ` Juergen Gross
2019-01-16 11:01   ` Borislav Petkov [this message]
2019-01-17  1:16     ` Chao Fan
2019-01-17  3:20     ` Chao Fan
2019-01-17 15:27       ` Borislav Petkov
2019-01-18  1:14         ` Chao Fan
2019-01-21  9:33     ` Chao Fan
2019-01-21  9:42       ` Chao Fan
2019-01-21  9:45         ` Borislav Petkov
2019-01-21  9:51           ` Chao Fan
2019-01-07  3:22 ` [PATCH v15 6/6] x86/boot/KASLR: Limit KASLR to extracting kernel in " Chao Fan
2019-01-16 11:15   ` Borislav Petkov
2019-01-17  1:25     ` Chao Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190116110158.GC15409@zn.tnic \
    --to=bp@alien8.de \
    --cc=bhe@redhat.com \
    --cc=caoj.fnst@cn.fujitsu.com \
    --cc=fanc.fnst@cn.fujitsu.com \
    --cc=hpa@zytor.com \
    --cc=indou.takao@jp.fujitsu.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=msys.mizuma@gmail.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome