From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Sibi Sankar <sibis@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes
Date: Mon, 21 Jan 2019 21:51:05 -0800 [thread overview]
Message-ID: <20190122055112.30943-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190122055112.30943-1-bjorn.andersson@linaro.org>
Add the ADSP and CDSP nodes for PAS-based remoteproc, supporting booting
these cores on e.g. the MTP, and enable the same for the MTP.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- New patch
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 8 ++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 +++++++++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index af8c6a2445a2..02b8357c8ce8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -48,6 +48,10 @@
};
};
+&adsp_pas {
+ status = "okay";
+};
+
&apps_rsc {
pm8998-rpmh-regulators {
compatible = "qcom,pm8998-rpmh-regulators";
@@ -344,6 +348,10 @@
};
};
+&cdsp_pas {
+ status = "okay";
+};
+
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 64f57cc5c61a..1033b77856e6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -319,6 +319,64 @@
};
};
+ adsp_pas: remoteproc-adsp {
+ compatible = "qcom,sdm845-adsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apss_shared 8>;
+ };
+ };
+
+ cdsp_pas: remoteproc-cdsp {
+ compatible = "qcom,sdm845-cdsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+ label = "turing";
+ qcom,remote-pid = <5>;
+ mboxes = <&apss_shared 4>;
+ };
+ };
+
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x1000>;
--
2.18.0
next prev parent reply other threads:[~2019-01-22 5:52 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-22 5:51 [PATCH v3 00/10] Qualcomm AOSS QMP driver and modem dts Bjorn Andersson
2019-01-22 5:51 ` [PATCH v3 01/10] arm64: dts: qcom: sdm845: Update PIL region memory map Bjorn Andersson
2019-01-22 18:58 ` Stephen Boyd
2019-01-22 19:24 ` Bjorn Andersson
2019-01-22 23:10 ` Doug Anderson
2019-01-23 0:30 ` Bjorn Andersson
2019-01-22 23:16 ` Doug Anderson
2019-01-23 0:39 ` Bjorn Andersson
2019-01-25 17:40 ` Sibi Sankar
2019-01-22 5:51 ` [PATCH v3 02/10] arm64: dts: qcom: sdm845: Define rmtfs memory Bjorn Andersson
2019-01-22 23:26 ` Doug Anderson
2019-01-22 23:34 ` Brian Norris
2019-01-23 0:47 ` Bjorn Andersson
2019-01-22 5:51 ` Bjorn Andersson [this message]
2019-01-22 23:46 ` [PATCH v3 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Doug Anderson
2019-01-23 0:26 ` Bjorn Andersson
2019-01-23 0:40 ` Doug Anderson
2019-01-23 1:09 ` Bjorn Andersson
2019-01-23 23:24 ` Doug Anderson
2019-01-24 6:22 ` Stephen Boyd
2019-01-22 5:51 ` [PATCH v3 04/10] dt-bindings: soc: qcom: Add AOSS QMP binding Bjorn Andersson
2019-01-22 19:04 ` Stephen Boyd
2019-01-22 19:25 ` Bjorn Andersson
2019-01-22 19:28 ` Stephen Boyd
2019-01-22 5:51 ` [PATCH v3 05/10] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-01-22 5:51 ` [PATCH v3 06/10] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-01-22 5:51 ` [PATCH v3 07/10] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-23 0:01 ` Doug Anderson
2019-01-22 5:51 ` [PATCH v3 08/10] remoteproc: q6v5-mss: Active powerdomain for SDM845 Bjorn Andersson
2019-01-22 5:51 ` [PATCH v3 09/10] arm64: dts: qcom: Add AOSS QMP node Bjorn Andersson
2019-01-22 5:51 ` [PATCH v3 10/10] arm64: dts: qcom: sdm845: Add Q6V5 MSS node Bjorn Andersson
2019-01-23 0:28 ` Doug Anderson
2019-01-23 1:10 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190122055112.30943-4-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sibis@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®