From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Takashi Sakamoto <o-takashi@sakamocchi.jp>,
Takashi Iwai <tiwai@suse.de>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 3.18 49/52] ALSA: bebob: fix model-id of unit for Apogee Ensemble
Date: Thu, 24 Jan 2019 20:20:13 +0100 [thread overview]
Message-ID: <20190124190150.847580912@linuxfoundation.org> (raw)
In-Reply-To: <20190124190140.879495253@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 644b2e97405b0b74845e1d3c2b4fe4c34858062b ]
This commit fixes hard-coded model-id for an unit of Apogee Ensemble with
a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly
known as BridgeCo AG).
I note that this model supports three modes in the number of data channels
in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is
switched by Vendor-dependent AV/C command, like:
$ cd linux-firewire-utils
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs)
When switching between different mode, the unit disappears from IEEE 1394
bus, then appears on the bus with different combination of stream formats.
In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else
up to 192.0 kHz.
$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
'bmc': True,
'chip_ID': 21474898341,
'cmc': True,
'cyc_clk_acc': 100,
'generation': 2,
'imc': True,
'isc': True,
'link_spd': 2,
'max_ROM': 1,
'max_rec': 512,
'name': '1394',
'node_vendor_ID': 987,
'pmc': False},
'root-directory': [ ['HARDWARE_VERSION', 19],
[ 'NODE_CAPABILITIES',
{ 'addressing': {'64': True, 'fix': True, 'prv': False},
'misc': {'int': False, 'ms': False, 'spt': True},
'state': { 'atn': False,
'ded': False,
'drq': True,
'elo': False,
'init': False,
'lst': True,
'off': False},
'testing': {'bas': False, 'ext': False}}],
['VENDOR', 987],
['DESCRIPTOR', 'Apogee Electronics'],
['MODEL', 126702],
['DESCRIPTOR', 'Ensemble'],
['VERSION', 5297],
[ 'UNIT',
[ ['SPECIFIER_ID', 41005],
['VERSION', 65537],
['MODEL', 126702],
['DESCRIPTOR', 'Ensemble']]],
[ 'DEPENDENT_INFO',
[ ['SPECIFIER_ID', 2037],
['VERSION', 1],
[(58, 'IMMEDIATE'), 16777159],
[(59, 'IMMEDIATE'), 1048576],
[(60, 'IMMEDIATE'), 16777159],
[(61, 'IMMEDIATE'), 6291456]]]]}
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/firewire/bebob/bebob.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index fc19c99654aa..e4312afe2ce5 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -356,7 +356,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
/* Apogee Electronics, DA/AD/DD-16X (X-FireWire card) */
SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x00010048, &spec_normal),
/* Apogee Electronics, Ensemble */
- SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x00001eee, &spec_normal),
+ SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x01eeee, &spec_normal),
/* ESI, Quatafire610 */
SND_BEBOB_DEV_ENTRY(VEN_ESI, 0x00010064, &spec_normal),
/* AcousticReality, eARMasterOne */
--
2.19.1
next prev parent reply other threads:[~2019-01-24 19:23 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-24 19:19 [PATCH 3.18 00/52] 3.18.133-stable review Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 01/52] sparc32: Fix inverted invalid_frame_pointer checks on sigreturns Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 02/52] CIFS: Do not hide EINTR after sending network packets Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 03/52] cifs: Fix potential OOB access of lock element array Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 04/52] usb: cdc-acm: send ZLP for Telit 3G Intel based modems Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 05/52] USB: storage: dont insert sane sense for SPC3+ when bad sense specified Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 06/52] USB: storage: add quirk for SMI SM3350 Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 07/52] slab: alien caches must not be initialized if the allocation of the alien cache failed Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 08/52] ACPI: power: Skip duplicate power resource references in _PRx Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 09/52] i2c: dev: prevent adapter retries and timeout being set as minus value Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 10/52] crypto: cts - fix crash on short inputs Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 11/52] sunrpc: use-after-free in svc_process_common() Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 12/52] tty/ldsem: Wake up readers after timed out down_write() Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 13/52] can: gw: ensure DLC boundaries after CAN frame modification Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 14/52] media: em28xx: Fix misplaced reset of dev->v4l::field_count Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 15/52] ipv6: fix kernel-infoleak in ipv6_local_error() Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 16/52] packet: Do not leak dev refcounts on error exit Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 17/52] net: bridge: fix a bug on using a neighbour cache entry without checking its state Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 18/52] crypto: authenc - fix parsing key with misaligned rta_len Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 19/52] btrfs: wait on ordered extents on abort cleanup Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 20/52] Yama: Check for pid death before checking ancestry Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 21/52] scsi: sd: Fix cache_type_store() Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 22/52] mfd: tps6586x: Handle interrupts on suspend Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 23/52] Disable MSI also when pcie-octeon.pcie_disable on Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 24/52] omap2fb: Fix stack memory disclosure Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 25/52] media: vivid: fix error handling of kthread_run Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 26/52] media: vivid: set min width/height to a value > 0 Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 27/52] media: vb2: vb2_mmap: move lock up Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 28/52] sunrpc: handle ENOMEM in rpcb_getport_async Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 29/52] selinux: fix GPF on invalid policy Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 30/52] sctp: allocate sctp_sockaddr_entry with kzalloc Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 31/52] block/loop: Use global lock for ioctl() operation Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 32/52] drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 33/52] media: vb2: be sure to unlock mutex on errors Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 34/52] r8169: Add support for new Realtek Ethernet Greg Kroah-Hartman
2019-01-24 19:19 ` [PATCH 3.18 35/52] MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 36/52] jffs2: Fix use of uninitialized delayed_work, lockdep breakage Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 37/52] pstore/ram: Do not treat empty buffers as valid Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 38/52] powerpc/pseries/cpuidle: Fix preempt warning Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 39/52] media: firewire: Fix app_info parameter type in avc_ca{,_app}_info Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 40/52] net: call sk_dst_reset when set SO_DONTROUTE Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 41/52] scsi: target: use consistent left-aligned ASCII INQUIRY data Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 42/52] clk: imx6q: reset exclusive gates on init Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 43/52] kconfig: fix memory leak when EOF is encountered in quotation Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 44/52] mmc: atmel-mci: do not assume idle after atmci_request_end Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 45/52] perf svghelper: Fix unchecked usage of strncpy() Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 46/52] perf parse-events: " Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 47/52] dm kcopyd: Fix bug causing workqueue stalls Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 48/52] dm snapshot: Fix excessive memory usage and " Greg Kroah-Hartman
2019-01-24 19:20 ` Greg Kroah-Hartman [this message]
2019-01-24 19:20 ` [PATCH 3.18 50/52] sysfs: Disable lockdep for driver bind/unbind files Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 51/52] ocfs2: fix panic due to unrecovered local alloc Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 3.18 52/52] mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps Greg Kroah-Hartman
2019-01-25 14:39 ` [PATCH 3.18 00/52] 3.18.133-stable review shuah
2019-01-25 23:16 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190124190150.847580912@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=o-takashi@sakamocchi.jp \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome