From: Thierry Reding <thierry.reding@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>,
Jon Hunter <jonathanh@nvidia.com>, JC Kuo <jckuo@nvidia.com>,
linux-usb@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] arm64: tegra: Remove regulator hacks on Jetson TX2
Date: Fri, 25 Jan 2019 12:30:13 +0100 [thread overview]
Message-ID: <20190125113013.11447-6-thierry.reding@gmail.com> (raw)
In-Reply-To: <20190125113013.11447-1-thierry.reding@gmail.com>
From: Thierry Reding <treding@nvidia.com>
Various regulators were marked as always-on for Jetson TX2. At this
point, all of the regulators are properly hooked up, so this workaround
is no longer required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
.../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 23 -------------------
1 file changed, 23 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index eb64d9be3231..0b62f80b0e86 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -266,43 +266,30 @@
regulator-name = "AVDD_DSI_CSI_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8: sd2 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_3v3_sys: sd3 {
regulator-name = "VDD_3V3_SYS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8_pll: ldo0 {
regulator-name = "VDD_1V8_AP_PLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
ldo2 {
regulator-name = "VDDIO_3V3_AOHV";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
regulator-always-on;
regulator-boot-on;
};
@@ -329,18 +316,12 @@
regulator-name = "VDD_HDMI_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_pex: ldo8 {
regulator-name = "VDD_PEX_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
};
};
@@ -388,10 +369,6 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
-
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
--
2.19.1
next prev parent reply other threads:[~2019-01-25 11:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-25 11:30 [PATCH 1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support Thierry Reding
2019-01-25 11:30 ` [PATCH 2/6] usb: host: xhci-tegra: Selectively program IPFS Thierry Reding
2019-01-28 7:54 ` jckuo
2019-01-25 11:30 ` [PATCH 3/6] usb: host: xhci-tegra: Add Tegra186 XUSB support Thierry Reding
2019-01-28 7:57 ` jckuo
2019-01-25 11:30 ` [PATCH 4/6] arm64: tegra: Add XUSB and pad controller on Tegra186 Thierry Reding
2019-01-28 7:59 ` jckuo
2019-01-25 11:30 ` [PATCH 5/6] arm64: tegra: Enable XUSB on P2771 Thierry Reding
2019-01-25 11:30 ` Thierry Reding [this message]
2019-01-28 7:46 ` [PATCH 1/6] dt-bindings: usb: xhci-tegra: Add Tegra186 support jckuo
2019-02-07 11:14 ` Thierry Reding
2019-02-13 15:21 ` Mathias Nyman
2019-02-23 0:36 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190125113013.11447-6-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jckuo@nvidia.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome