From: Josh Poimboeuf <jpoimboe@redhat.com>
To: Igor Mammedov <imammedo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Joe Mario <jmario@redhat.com>, Jiri Kosina <jkosina@suse.cz>,
Peter Zijlstra <peterz@infradead.org>,
linux-kernel@vger.kernel.org
Subject: Re: cpu/hotplug: broken sibling thread hotplug
Date: Fri, 25 Jan 2019 11:02:03 -0600 [thread overview]
Message-ID: <20190125170203.2o2l27d2sytw44nl@treble> (raw)
In-Reply-To: <20190125163657.rqbykfn7ebpclc2z@treble>
On Fri, Jan 25, 2019 at 10:36:57AM -0600, Josh Poimboeuf wrote:
> How about this patch? It's just a revert of 73d5e2b47264 and
> bc2d8d262cba, plus the 1-line vmx_vm_init() change. If it looks ok to
> you, I can clean it up and submit an official version.
This one actually compiles...
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 1de0f4170178..01874d54f4fd 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -71,7 +71,7 @@ void __init check_bugs(void)
* identify_boot_cpu() initialized SMT support information, let the
* core code know.
*/
- cpu_smt_check_topology_early();
+ cpu_smt_check_topology();
if (!IS_ENABLED(CONFIG_SMP)) {
pr_info("CPU: ");
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index f6915f10e584..e2d6fa3c60d5 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -26,6 +26,7 @@
#include <linux/mod_devicetable.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/sched/smt.h>
#include <linux/slab.h>
#include <linux/tboot.h>
#include <linux/trace_events.h>
@@ -6816,7 +6817,7 @@ static int vmx_vm_init(struct kvm *kvm)
* Warn upon starting the first VM in a potentially
* insecure environment.
*/
- if (cpu_smt_control == CPU_SMT_ENABLED)
+ if (sched_smt_active())
pr_warn_once(L1TF_MSG_SMT);
if (l1tf_vmx_mitigation == VMENTER_L1D_FLUSH_NEVER)
pr_warn_once(L1TF_MSG_L1D);
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 218df7f4d3e1..5041357d0297 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -180,12 +180,10 @@ enum cpuhp_smt_control {
#if defined(CONFIG_SMP) && defined(CONFIG_HOTPLUG_SMT)
extern enum cpuhp_smt_control cpu_smt_control;
extern void cpu_smt_disable(bool force);
-extern void cpu_smt_check_topology_early(void);
extern void cpu_smt_check_topology(void);
#else
# define cpu_smt_control (CPU_SMT_ENABLED)
static inline void cpu_smt_disable(bool force) { }
-static inline void cpu_smt_check_topology_early(void) { }
static inline void cpu_smt_check_topology(void) { }
#endif
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 34e40ef2f6e0..05d359e4173a 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -387,8 +387,6 @@ void __weak arch_smt_update(void) { }
enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED;
EXPORT_SYMBOL_GPL(cpu_smt_control);
-static bool cpu_smt_available __read_mostly;
-
void __init cpu_smt_disable(bool force)
{
if (cpu_smt_control == CPU_SMT_FORCE_DISABLED ||
@@ -406,25 +404,11 @@ void __init cpu_smt_disable(bool force)
/*
* The decision whether SMT is supported can only be done after the full
- * CPU identification. Called from architecture code before non boot CPUs
- * are brought up.
- */
-void __init cpu_smt_check_topology_early(void)
-{
- if (!topology_smt_supported())
- cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
-}
-
-/*
- * If SMT was disabled by BIOS, detect it here, after the CPUs have been
- * brought online. This ensures the smt/l1tf sysfs entries are consistent
- * with reality. cpu_smt_available is set to true during the bringup of non
- * boot CPUs when a SMT sibling is detected. Note, this may overwrite
- * cpu_smt_control's previous setting.
+ * CPU identification. Called from architecture code.
*/
void __init cpu_smt_check_topology(void)
{
- if (!cpu_smt_available)
+ if (!topology_smt_supported())
cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
}
@@ -437,18 +421,10 @@ early_param("nosmt", smt_cmdline_disable);
static inline bool cpu_smt_allowed(unsigned int cpu)
{
- if (topology_is_primary_thread(cpu))
+ if (cpu_smt_control == CPU_SMT_ENABLED)
return true;
- /*
- * If the CPU is not a 'primary' thread and the booted_once bit is
- * set then the processor has SMT support. Store this information
- * for the late check of SMT support in cpu_smt_check_topology().
- */
- if (per_cpu(cpuhp_state, cpu).booted_once)
- cpu_smt_available = true;
-
- if (cpu_smt_control == CPU_SMT_ENABLED)
+ if (topology_is_primary_thread(cpu))
return true;
/*
diff --git a/kernel/smp.c b/kernel/smp.c
index 163c451af42e..f4cf1b0bb3b8 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -584,8 +584,6 @@ void __init smp_init(void)
num_nodes, (num_nodes > 1 ? "s" : ""),
num_cpus, (num_cpus > 1 ? "s" : ""));
- /* Final decision about SMT support */
- cpu_smt_check_topology();
/* Any cleanup work */
smp_cpus_done(setup_max_cpus);
}
next prev parent reply other threads:[~2019-01-25 17:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-24 15:57 Igor Mammedov
2019-01-25 16:36 ` Josh Poimboeuf
2019-01-25 17:02 ` Josh Poimboeuf [this message]
2019-01-28 10:13 ` Igor Mammedov
2019-01-28 12:52 ` Josh Poimboeuf
2019-01-28 13:35 ` Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190125170203.2o2l27d2sytw44nl@treble \
--to=jpoimboe@redhat.com \
--cc=imammedo@redhat.com \
--cc=jkosina@suse.cz \
--cc=jmario@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®