From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH 2/2] regulator: max77650: Convert to use regulator_enable/disable/is_enabled_regmap
Date: Wed, 30 Jan 2019 17:07:22 +0800 [thread overview]
Message-ID: <20190130090722.24134-2-axel.lin@ingics.com> (raw)
In-Reply-To: <20190130090722.24134-1-axel.lin@ingics.com>
By setting enable_reg, enable_mask, enable_val and disable_val, we can
use the regulator_enable/disable/is_enabled_regmap helpers. With this
change, then regB field can be removed from struct max77650_regulator_desc.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi Bartosz,
I don't have this h/w, please help to review and test it.
I think the only difference is the is_enabled checking:
Before the patch, it returns en != MAX77650_REGULATOR_DISABLED;
After the patch, it returns en == MAX77650_REGULATOR_ENABLED
I'm not sure if this difference does matter or not.
Thanks,
Axel
drivers/regulator/max77650-regulator.c | 87 +++++++-------------------
1 file changed, 23 insertions(+), 64 deletions(-)
diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c
index 5afb91400832..90c0f73f3fad 100644
--- a/drivers/regulator/max77650-regulator.c
+++ b/drivers/regulator/max77650-regulator.c
@@ -13,8 +13,6 @@
#include <linux/regulator/driver.h>
#define MAX77650_REGULATOR_EN_CTRL_MASK GENMASK(3, 0)
-#define MAX77650_REGULATOR_EN_CTRL_BITS(_reg) \
- ((_reg) & MAX77650_REGULATOR_EN_CTRL_MASK)
#define MAX77650_REGULATOR_ENABLED GENMASK(2, 1)
#define MAX77650_REGULATOR_DISABLED BIT(2)
@@ -41,7 +39,6 @@ enum {
struct max77650_regulator_desc {
struct regulator_desc desc;
unsigned int regA;
- unsigned int regB;
};
static const u32 max77651_sbb1_regulator_volt_table[] = {
@@ -86,50 +83,6 @@ static const int max77650_current_limit_table[] = {
1000000, 866000, 707000, 500000,
};
-static int max77650_regulator_is_enabled(struct regulator_dev *rdev)
-{
- struct max77650_regulator_desc *rdesc;
- struct regmap *map;
- int val, rv, en;
-
- rdesc = rdev_get_drvdata(rdev);
- map = rdev_get_regmap(rdev);
-
- rv = regmap_read(map, rdesc->regB, &val);
- if (rv)
- return rv;
-
- en = MAX77650_REGULATOR_EN_CTRL_BITS(val);
-
- return en != MAX77650_REGULATOR_DISABLED;
-}
-
-static int max77650_regulator_enable(struct regulator_dev *rdev)
-{
- struct max77650_regulator_desc *rdesc;
- struct regmap *map;
-
- rdesc = rdev_get_drvdata(rdev);
- map = rdev_get_regmap(rdev);
-
- return regmap_update_bits(map, rdesc->regB,
- MAX77650_REGULATOR_EN_CTRL_MASK,
- MAX77650_REGULATOR_ENABLED);
-}
-
-static int max77650_regulator_disable(struct regulator_dev *rdev)
-{
- struct max77650_regulator_desc *rdesc;
- struct regmap *map;
-
- rdesc = rdev_get_drvdata(rdev);
- map = rdev_get_regmap(rdev);
-
- return regmap_update_bits(map, rdesc->regB,
- MAX77650_REGULATOR_EN_CTRL_MASK,
- MAX77650_REGULATOR_DISABLED);
-}
-
static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned int sel)
{
@@ -140,7 +93,7 @@ static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev,
* If the regulator is disabled, we can program the desired
* voltage right away.
*/
- if (!max77650_regulator_is_enabled(rdev))
+ if (!regulator_is_enabled_regmap(rdev))
return regulator_set_voltage_sel_regmap(rdev, sel);
/*
@@ -189,7 +142,7 @@ static int max77651_regulator_sbb1_set_voltage_sel(struct regulator_dev *rdev,
* If the regulator is disabled, we can program the desired
* voltage right away.
*/
- if (!max77650_regulator_is_enabled(rdev))
+ if (!regulator_is_enabled_regmap(rdev))
return regulator_set_voltage_sel_regmap(rdev, sel);
curr = regulator_get_voltage_sel_regmap(rdev);
@@ -264,9 +217,9 @@ static int max77650_regulator_set_current_limit(struct regulator_dev *rdev,
}
static const struct regulator_ops max77650_regulator_LDO_ops = {
- .is_enabled = max77650_regulator_is_enabled,
- .enable = max77650_regulator_enable,
- .disable = max77650_regulator_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -275,9 +228,9 @@ static const struct regulator_ops max77650_regulator_LDO_ops = {
};
static const struct regulator_ops max77650_regulator_SBB_ops = {
- .is_enabled = max77650_regulator_is_enabled,
- .enable = max77650_regulator_enable,
- .disable = max77650_regulator_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -289,9 +242,9 @@ static const struct regulator_ops max77650_regulator_SBB_ops = {
/* Special case for max77651 SBB1 - non-linear voltage mapping. */
static const struct regulator_ops max77651_SBB1_regulator_ops = {
- .is_enabled = max77650_regulator_is_enabled,
- .enable = max77650_regulator_enable,
- .disable = max77650_regulator_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_table,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = max77651_regulator_sbb1_set_voltage_sel,
@@ -313,6 +266,10 @@ static struct max77650_regulator_desc max77650_LDO_desc = {
.n_voltages = 128,
.vsel_mask = MAX77650_REGULATOR_V_LDO_MASK,
.vsel_reg = MAX77650_REG_CNFG_LDO_A,
+ .enable_reg = MAX77650_REG_CNFG_LDO_B,
+ .enable_mask = MAX77650_REGULATOR_EN_CTRL_MASK,
+ .enable_val = MAX77650_REGULATOR_ENABLED,
+ .disable_val = MAX77650_REGULATOR_DISABLED,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
@@ -321,7 +278,6 @@ static struct max77650_regulator_desc max77650_LDO_desc = {
.type = REGULATOR_VOLTAGE,
},
.regA = MAX77650_REG_CNFG_LDO_A,
- .regB = MAX77650_REG_CNFG_LDO_B,
};
static struct max77650_regulator_desc max77650_SBB0_desc = {
@@ -337,6 +293,10 @@ static struct max77650_regulator_desc max77650_SBB0_desc = {
.n_voltages = 64,
.vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
.vsel_reg = MAX77650_REG_CNFG_SBB0_A,
+ .enable_reg = MAX77650_REG_CNFG_LDO_B,
+ .enable_mask = MAX77650_REGULATOR_EN_CTRL_MASK,
+ .enable_val = MAX77650_REGULATOR_ENABLED,
+ .disable_val = MAX77650_REGULATOR_DISABLED,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
@@ -345,7 +305,6 @@ static struct max77650_regulator_desc max77650_SBB0_desc = {
.type = REGULATOR_VOLTAGE,
},
.regA = MAX77650_REG_CNFG_SBB0_A,
- .regB = MAX77650_REG_CNFG_SBB0_B,
};
static struct max77650_regulator_desc max77650_SBB1_desc = {
@@ -361,6 +320,10 @@ static struct max77650_regulator_desc max77650_SBB1_desc = {
.n_voltages = 64,
.vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
.vsel_reg = MAX77650_REG_CNFG_SBB1_A,
+ .enable_reg = MAX77650_REG_CNFG_LDO_B,
+ .enable_mask = MAX77650_REGULATOR_EN_CTRL_MASK,
+ .enable_val = MAX77650_REGULATOR_ENABLED,
+ .disable_val = MAX77650_REGULATOR_DISABLED,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
.active_discharge_mask = MAX77650_REGULATOR_AD_MASK,
@@ -369,7 +332,6 @@ static struct max77650_regulator_desc max77650_SBB1_desc = {
.type = REGULATOR_VOLTAGE,
},
.regA = MAX77650_REG_CNFG_SBB1_A,
- .regB = MAX77650_REG_CNFG_SBB1_B,
};
static struct max77650_regulator_desc max77651_SBB1_desc = {
@@ -392,7 +354,6 @@ static struct max77650_regulator_desc max77651_SBB1_desc = {
.type = REGULATOR_VOLTAGE,
},
.regA = MAX77650_REG_CNFG_SBB1_A,
- .regB = MAX77650_REG_CNFG_SBB1_B,
};
static struct max77650_regulator_desc max77650_SBB2_desc = {
@@ -416,7 +377,6 @@ static struct max77650_regulator_desc max77650_SBB2_desc = {
.type = REGULATOR_VOLTAGE,
},
.regA = MAX77650_REG_CNFG_SBB2_A,
- .regB = MAX77650_REG_CNFG_SBB2_B,
};
static struct max77650_regulator_desc max77651_SBB2_desc = {
@@ -440,7 +400,6 @@ static struct max77650_regulator_desc max77651_SBB2_desc = {
.type = REGULATOR_VOLTAGE,
},
.regA = MAX77650_REG_CNFG_SBB2_A,
- .regB = MAX77650_REG_CNFG_SBB2_B,
};
static int max77650_regulator_probe(struct platform_device *pdev)
--
2.17.1
next prev parent reply other threads:[~2019-01-30 9:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 9:07 [PATCH 1/2] regulator: max77650: Fix include files Axel Lin
2019-01-30 9:07 ` Axel Lin [this message]
2019-01-30 9:12 ` [PATCH 2/2] regulator: max77650: Convert to use regulator_enable/disable/is_enabled_regmap Bartosz Golaszewski
2019-01-30 9:14 ` Axel Lin
2019-01-30 9:13 ` [PATCH 1/2] regulator: max77650: Fix include files Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130090722.24134-2-axel.lin@ingics.com \
--to=axel.lin@ingics.com \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®