From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Stefan Agner <stefan@agner.ch>
Cc: jingoohan1@gmail.com, gustavo.pimentel@synopsys.com,
l.stach@pengutronix.de, tpiepho@impinj.com,
leonard.crestez@nxp.com, bhelgaas@google.com,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/3] PCI: dwc: allow to limit registers set length
Date: Wed, 30 Jan 2019 17:54:15 +0000 [thread overview]
Message-ID: <20190130175415.GA7715@e107981-ln.cambridge.arm.com> (raw)
In-Reply-To: <20181204165528.15534-1-stefan@agner.ch>
On Tue, Dec 04, 2018 at 05:55:26PM +0100, Stefan Agner wrote:
> Add length to the struct dw_pcie and check that the accessors
> dw_pcie_(rd|wr)_conf() do not read/write beyond that point.
>
> Suggested-by: Trent Piepho <tpiepho@impinj.com>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> Changes in v4:
> - Move length check to dw_pcie_rd_conf
>
> .../pci/controller/dwc/pcie-designware-host.c | 16 ++++++++++++++--
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 15 insertions(+), 2 deletions(-)
Hi Stefan,
I wanted to ask you if this series should be considered for v5.1
inclusion, it is in the PCI backlog. If it is, let me have a look
and if it is OK to go I will likely ask you to rebase it.
Thanks,
Lorenzo
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 692dd1b264fb..9fc0f7bd99f0 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -606,14 +606,20 @@ static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
> int size, u32 *val)
> {
> struct pcie_port *pp = bus->sysdata;
> + struct dw_pcie *pci;
>
> if (!dw_pcie_valid_device(pp, bus, PCI_SLOT(devfn))) {
> *val = 0xffffffff;
> return PCIBIOS_DEVICE_NOT_FOUND;
> }
>
> - if (bus->number == pp->root_bus_nr)
> + if (bus->number == pp->root_bus_nr) {
> + pci = to_dw_pcie_from_pp(pp);
> + if (pci->dbi_length && where + size > pci->dbi_length)
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> return dw_pcie_rd_own_conf(pp, where, size, val);
> + }
>
> return dw_pcie_rd_other_conf(pp, bus, devfn, where, size, val);
> }
> @@ -622,12 +628,18 @@ static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
> int where, int size, u32 val)
> {
> struct pcie_port *pp = bus->sysdata;
> + struct dw_pcie *pci;
>
> if (!dw_pcie_valid_device(pp, bus, PCI_SLOT(devfn)))
> return PCIBIOS_DEVICE_NOT_FOUND;
>
> - if (bus->number == pp->root_bus_nr)
> + if (bus->number == pp->root_bus_nr) {
> + pci = to_dw_pcie_from_pp(pp);
> + if (pci->dbi_length && where + size > pci->dbi_length)
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> return dw_pcie_wr_own_conf(pp, where, size, val);
> + }
>
> return dw_pcie_wr_other_conf(pp, bus, devfn, where, size, val);
> }
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 9943d8c68335..9cd7bdc94200 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -229,6 +229,7 @@ struct dw_pcie {
> void __iomem *dbi_base2;
> /* Used when iatu_unroll_enabled is true */
> void __iomem *atu_base;
> + int dbi_length;
> u32 num_viewport;
> u8 iatu_unroll_enabled;
> struct pcie_port pp;
> --
> 2.19.1
>
next prev parent reply other threads:[~2019-01-30 17:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-04 16:55 Stefan Agner
2018-12-04 16:55 ` [PATCH v4 2/3] PCI: imx6: introduce drvdata Stefan Agner
2018-12-04 16:55 ` [PATCH v4 3/3] PCI: imx6: limit DBI register length Stefan Agner
2018-12-04 19:08 ` Leonard Crestez
2019-01-30 17:54 ` Lorenzo Pieralisi [this message]
2019-01-31 9:08 ` [PATCH v4 1/3] PCI: dwc: allow to limit registers set length Stefan Agner
2019-02-01 17:13 ` Lorenzo Pieralisi
2019-02-04 12:27 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130175415.GA7715@e107981-ln.cambridge.arm.com \
--to=lorenzo.pieralisi@arm.com \
--cc=bhelgaas@google.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=stefan@agner.ch \
--cc=tpiepho@impinj.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®