[PATCH v1 16/19] drm/panel: raydium: use DRM_DEV*

[Sam Ravnborg <sam@ravnborg.org>]

Introduce use of DRM_DEV* for logging.
This makes logging in the drm subsystem more consistent.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
---
 drivers/gpu/drm/panel/panel-raydium-rm68200.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-raydium-rm68200.c b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
index e05e3f950855..bbf3f51c8a3a 100644
--- a/drivers/gpu/drm/panel/panel-raydium-rm68200.c
+++ b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
@@ -379,14 +379,14 @@ static int rm68200_probe(struct mipi_dsi_device *dsi)
 	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset_gpio)) {
 		ret = PTR_ERR(ctx->reset_gpio);
-		dev_err(dev, "cannot get reset GPIO: %d\n", ret);
+		DRM_DEV_ERROR(dev, "cannot get reset GPIO: %d\n", ret);
 		return ret;
 	}
 
 	ctx->supply = devm_regulator_get(dev, "power");
 	if (IS_ERR(ctx->supply)) {
 		ret = PTR_ERR(ctx->supply);
-		dev_err(dev, "cannot get regulator: %d\n", ret);
+		DRM_DEV_ERROR(dev, "cannot get regulator: %d\n", ret);
 		return ret;
 	}
 
@@ -411,7 +411,7 @@ static int rm68200_probe(struct mipi_dsi_device *dsi)
 
 	ret = mipi_dsi_attach(dsi);
 	if (ret < 0) {
-		dev_err(dev, "mipi_dsi_attach() failed: %d\n", ret);
+		DRM_DEV_ERROR(dev, "mipi_dsi_attach() failed: %d\n", ret);
 		drm_panel_remove(&ctx->panel);
 		return ret;
 	}
-- 
2.12.0