From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.0 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5B673C169C4 for ; Wed, 6 Feb 2019 03:32:58 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 31941218A3 for ; Wed, 6 Feb 2019 03:32:58 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728335AbfBFDc4 (ORCPT ); Tue, 5 Feb 2019 22:32:56 -0500 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:33836 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728097AbfBFDcu (ORCPT ); Tue, 5 Feb 2019 22:32:50 -0500 Received: by wens.csie.org (Postfix, from userid 1000) id DB8975FDD0; Wed, 6 Feb 2019 11:32:43 +0800 (CST) From: Chen-Yu Tsai To: Maxime Ripard , Linus Walleij Cc: Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH 8/9] ARM: dts: sun9i: a80-optimus: Enable GMAC Date: Wed, 6 Feb 2019 11:32:38 +0800 Message-Id: <20190206033239.3619-9-wens@csie.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190206033239.3619-1-wens@csie.org> References: <20190206033239.3619-1-wens@csie.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The A80 Optimus has a Realtek RTL8211E ethernet PHY which uses RGMII to talk to the MAC. The PHY is powered by 2 regulators: cldo1 for the PHY's core logic and gpio1-ldo for I/O. The latter also powers the SoC side pins. As there is no binding to model a second regulator supply for the PHY, it is omitted. It is however properly modeled for the PIO. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 9c25176e69dc..864715ec3cb0 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -120,6 +120,19 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_cldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -391,6 +404,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; -- 2.20.1