From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-3.0 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SPF_PASS,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 569CEC169C4 for ; Mon, 11 Feb 2019 13:24:35 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 2B9912184E for ; Mon, 11 Feb 2019 13:24:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727944AbfBKNYd (ORCPT ); Mon, 11 Feb 2019 08:24:33 -0500 Received: from relay5-d.mail.gandi.net ([217.70.183.197]:50655 "EHLO relay5-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727566AbfBKNYd (ORCPT ); Mon, 11 Feb 2019 08:24:33 -0500 X-Originating-IP: 90.88.22.177 Received: from localhost (aaubervilliers-681-1-80-177.w90-88.abo.wanadoo.fr [90.88.22.177]) (Authenticated sender: thomas.petazzoni@bootlin.com) by relay5-d.mail.gandi.net (Postfix) with ESMTPSA id 810E91C000C; Mon, 11 Feb 2019 13:24:29 +0000 (UTC) From: Thomas Petazzoni To: Adrian Hunter , Kishon Vijay Abraham I , Ulf Hansson , Thierry Reding , Jonathan Hunter Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org, Faiz Abbas , Thomas Petazzoni Subject: [PATCH v2 0/3] mmc: Introduce support for WP GPIO in the core SDHCI Date: Mon, 11 Feb 2019 14:23:39 +0100 Message-Id: <20190211132342.31009-1-thomas.petazzoni@bootlin.com> X-Mailer: git-send-email 2.20.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hello, While doing the bring up of a Zynq 7000 platform where the WP signal of a SD slot is connected to a regular GPIO rather than through the SDHCI WP pin, I realized that the GPIO described by wp-gpios was properly requested, but it was in fact not used at all. Indeed, the SDHCI core implements sdhci_check_ro() by: - Calling a controller-specific ->get_ro() callback if it exists. A few controller-specific drivers implement this, but not sdhci-of-arasan, which is used on Zynq 7000. - Using the SDHCI_PRESENT_STATE register, which reports the state of the SDHCI interface WP pin, and obvisouly not the state of a separate WP GPIO. This patch series therefore changes sdhci_check_ro() to behave like sdhci_get_cd(): use a GPIO first if available, and if not, fallback to using the SDHCI_PRESENT_STATE register. Indeed, if there's a wp-gpios described in the DT, it quite certainly indicates that the SDHCI WP signal is not used, and the WP GPIO should be used instead. As part of this series, two SDHCI drivers are modified to no longer implement their custom ->get_ro() hook, since the core SDHCI now does the right thing with the WP GPIO. Changes since v1: - Call the ->get_ro() callback before using the WP GPIO in the core, as suggested by Adrian Hunter. - Fix typoes in commit logs. - Collect Reviewed-by/Tested-by/Acked-by tags. Best regards, Thomas Thomas Petazzoni (3): mmc: sdhci: use WP GPIO in sdhci_check_ro() mmc: sdhci-omap: drop ->get_ro() implementation mmc: sdhci-tegra: drop ->get_ro() implementation drivers/mmc/host/sdhci-omap.c | 1 - drivers/mmc/host/sdhci-tegra.c | 9 --------- drivers/mmc/host/sdhci.c | 9 ++++++--- 3 files changed, 6 insertions(+), 13 deletions(-) -- 2.20.1