From: Colin King <colin.king@canonical.com>
To: James Smart <james.smart@broadcom.com>,
Dick Kennedy <dick.kennedy@broadcom.com>,
"James E . J . Bottomley" <jejb@linux.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] scsi: lpfc: fix a handful of indentation issues
Date: Tue, 12 Feb 2019 15:29:45 +0000 [thread overview]
Message-ID: <20190212152945.11362-1-colin.king@canonical.com> (raw)
From: Colin Ian King <colin.king@canonical.com>
There are a handful of statements that are indented incorrectly. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/scsi/lpfc/lpfc_bsg.c | 4 ++--
drivers/scsi/lpfc/lpfc_debugfs.c | 4 ++--
drivers/scsi/lpfc/lpfc_init.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 4 ++--
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
5 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 2dc564e59430..f2494d3b365c 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -2947,7 +2947,7 @@ static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri,
cmd->un.cont64[i].addrLow = putPaddrLow(mp[i]->phys);
cmd->un.cont64[i].tus.f.bdeSize =
((struct lpfc_dmabufext *)mp[i])->size;
- cmd->ulpBdeCount = ++i;
+ cmd->ulpBdeCount = ++i;
if ((--num_bde > 0) && (i < 2))
continue;
@@ -4682,7 +4682,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct bsg_job *job,
* Don't allow mailbox commands to be sent when blocked or when in
* the middle of discovery
*/
- if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
+ if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
rc = -EAGAIN;
goto job_done;
}
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index ee98ea1c68f9..1215eaa530db 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1833,7 +1833,7 @@ lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file)
int rc = -ENOMEM;
if (!lpfc_debugfs_max_disc_trc) {
- rc = -ENOSPC;
+ rc = -ENOSPC;
goto out;
}
@@ -1883,7 +1883,7 @@ lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file)
int rc = -ENOMEM;
if (!lpfc_debugfs_max_slow_ring_trc) {
- rc = -ENOSPC;
+ rc = -ENOSPC;
goto out;
}
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 900edae7ccc4..18424020ae40 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -10118,7 +10118,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config "
"registers.\n");
- goto out;
+ goto out;
}
lpfc_sli4_bar0_register_memmap(phba, if_type);
}
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 4d3b94317515..8abe933bad09 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -2095,8 +2095,8 @@ lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
if (phba->nvmet_support) {
bf_set(lpfc_mbx_rq_ftr_rq_mrqp, &mboxq->u.mqe.un.req_ftrs, 1);
/* iaab/iaar NOT set for now */
- bf_set(lpfc_mbx_rq_ftr_rq_iaab, &mboxq->u.mqe.un.req_ftrs, 0);
- bf_set(lpfc_mbx_rq_ftr_rq_iaar, &mboxq->u.mqe.un.req_ftrs, 0);
+ bf_set(lpfc_mbx_rq_ftr_rq_iaab, &mboxq->u.mqe.un.req_ftrs, 0);
+ bf_set(lpfc_mbx_rq_ftr_rq_iaar, &mboxq->u.mqe.un.req_ftrs, 0);
}
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 3596822605c3..d0817facdae3 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1008,7 +1008,7 @@ lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
if (!ndlp->active_rrqs_xri_bitmap)
return 0;
if (test_bit(xritag, ndlp->active_rrqs_xri_bitmap))
- return 1;
+ return 1;
else
return 0;
}
--
2.20.1
next reply other threads:[~2019-02-12 15:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-12 15:29 Colin King [this message]
2019-02-13 21:24 ` James Smart
2019-02-14 3:16 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190212152945.11362-1-colin.king@canonical.com \
--to=colin.king@canonical.com \
--cc=dick.kennedy@broadcom.com \
--cc=james.smart@broadcom.com \
--cc=jejb@linux.ibm.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®