From: Patrick Havelange <patrick.havelange@essensium.com>
To: Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Thierry Reding <thierry.reding@gmail.com>,
Esben Haabendal <esben@haabendal.dk>,
William Breathitt Gray <vilhelm.gray@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Subject: [PATCH 1/8] include/fsl: add common FlexTimer #defines in a separate header.
Date: Mon, 18 Feb 2019 15:03:14 +0100 [thread overview]
Message-ID: <20190218140321.19166-1-patrick.havelange@essensium.com> (raw)
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Reviewed-by: Esben Haabendal <esben@haabendal.dk>
---
include/linux/fsl/ftm.h | 88 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 include/linux/fsl/ftm.h
diff --git a/include/linux/fsl/ftm.h b/include/linux/fsl/ftm.h
new file mode 100644
index 000000000000..d59011acf66c
--- /dev/null
+++ b/include/linux/fsl/ftm.h
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef __FSL_FTM_H__
+#define __FSL_FTM_H__
+
+#define FTM_SC 0x0 /* Status And Control */
+#define FTM_CNT 0x4 /* Counter */
+#define FTM_MOD 0x8 /* Modulo */
+
+#define FTM_CNTIN 0x4C /* Counter Initial Value */
+#define FTM_STATUS 0x50 /* Capture And Compare Status */
+#define FTM_MODE 0x54 /* Features Mode Selection */
+#define FTM_SYNC 0x58 /* Synchronization */
+#define FTM_OUTINIT 0x5C /* Initial State For Channels Output */
+#define FTM_OUTMASK 0x60 /* Output Mask */
+#define FTM_COMBINE 0x64 /* Function For Linked Channels */
+#define FTM_DEADTIME 0x68 /* Deadtime Insertion Control */
+#define FTM_EXTTRIG 0x6C /* FTM External Trigger */
+#define FTM_POL 0x70 /* Channels Polarity */
+#define FTM_FMS 0x74 /* Fault Mode Status */
+#define FTM_FILTER 0x78 /* Input Capture Filter Control */
+#define FTM_FLTCTRL 0x7C /* Fault Control */
+#define FTM_QDCTRL 0x80 /* Quadrature Decoder Control And Status */
+#define FTM_CONF 0x84 /* Configuration */
+#define FTM_FLTPOL 0x88 /* FTM Fault Input Polarity */
+#define FTM_SYNCONF 0x8C /* Synchronization Configuration */
+#define FTM_INVCTRL 0x90 /* FTM Inverting Control */
+#define FTM_SWOCTRL 0x94 /* FTM Software Output Control */
+#define FTM_PWMLOAD 0x98 /* FTM PWM Load */
+
+#define FTM_SC_CLK_MASK_SHIFT 3
+#define FTM_SC_CLK_MASK (3 << FTM_SC_CLK_MASK_SHIFT)
+#define FTM_SC_TOF 0x80
+#define FTM_SC_TOIE 0x40
+#define FTM_SC_CPWMS 0x20
+#define FTM_SC_CLKS 0x18
+#define FTM_SC_PS_1 0x0
+#define FTM_SC_PS_2 0x1
+#define FTM_SC_PS_4 0x2
+#define FTM_SC_PS_8 0x3
+#define FTM_SC_PS_16 0x4
+#define FTM_SC_PS_32 0x5
+#define FTM_SC_PS_64 0x6
+#define FTM_SC_PS_128 0x7
+#define FTM_SC_PS_MASK 0x7
+
+#define FTM_MODE_FAULTIE 0x80
+#define FTM_MODE_FAULTM 0x60
+#define FTM_MODE_CAPTEST 0x10
+#define FTM_MODE_PWMSYNC 0x8
+#define FTM_MODE_WPDIS 0x4
+#define FTM_MODE_INIT 0x2
+#define FTM_MODE_FTMEN 0x1
+
+/* NXP Errata: The PHAFLTREN and PHBFLTREN bits are tide to zero internally
+ * and these bits cannot be set. Flextimer cannot use Filter in
+ * Quadrature Decoder Mode.
+ * https://community.nxp.com/thread/467648#comment-1010319
+ */
+#define FTM_QDCTRL_PHAFLTREN 0x80
+#define FTM_QDCTRL_PHBFLTREN 0x40
+#define FTM_QDCTRL_PHAPOL 0x20
+#define FTM_QDCTRL_PHBPOL 0x10
+#define FTM_QDCTRL_QUADMODE 0x8
+#define FTM_QDCTRL_QUADDIR 0x4
+#define FTM_QDCTRL_TOFDIR 0x2
+#define FTM_QDCTRL_QUADEN 0x1
+
+#define FTM_FMS_FAULTF 0x80
+#define FTM_FMS_WPEN 0x40
+#define FTM_FMS_FAULTIN 0x10
+#define FTM_FMS_FAULTF3 0x8
+#define FTM_FMS_FAULTF2 0x4
+#define FTM_FMS_FAULTF1 0x2
+#define FTM_FMS_FAULTF0 0x1
+
+#define FTM_CSC_BASE 0xC
+#define FTM_CSC_MSB 0x20
+#define FTM_CSC_MSA 0x10
+#define FTM_CSC_ELSB 0x8
+#define FTM_CSC_ELSA 0x4
+#define FTM_CSC(_channel) (FTM_CSC_BASE + ((_channel) * 8))
+
+#define FTM_CV_BASE 0x10
+#define FTM_CV(_channel) (FTM_CV_BASE + ((_channel) * 8))
+
+#define FTM_PS_MAX 7
+
+#endif
--
2.17.1
next reply other threads:[~2019-02-18 14:25 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-18 14:03 Patrick Havelange [this message]
2019-02-18 14:03 ` [PATCH 2/8] drivers/pwm: pwm-fsl-ftm: use common header for FlexTimer #defines Patrick Havelange
2019-02-18 14:03 ` [PATCH 3/8] drivers/clocksource: timer-fsl-ftm: " Patrick Havelange
2019-02-18 14:20 ` Daniel Lezcano
2019-02-18 14:03 ` [PATCH 4/8] dt-bindings: iio/counter: ftm-quaddec Patrick Havelange
2019-02-18 14:03 ` [PATCH 5/8] iio/counter: add FlexTimer Module Quadrature decoder counter driver Patrick Havelange
2019-02-20 16:41 ` Jonathan Cameron
2019-02-21 1:09 ` William Breathitt Gray
2019-02-21 8:28 ` William Breathitt Gray
2019-02-22 14:37 ` Patrick Havelange
2019-03-04 12:36 ` Patrick Havelange
2019-02-18 14:03 ` [PATCH 6/8] LS1021A: dtsi: add ftm quad decoder entries Patrick Havelange
2019-02-18 14:03 ` [PATCH 7/8] dt-bindings: iio/counter: ftm-quaddec: add poll-interval parameter Patrick Havelange
2019-02-28 19:47 ` Rob Herring
2019-02-18 14:03 ` [PATCH 8/8] iio/counter/ftm-quaddec: add handling of under/overflow of the counter Patrick Havelange
2019-02-20 16:54 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190218140321.19166-1-patrick.havelange@essensium.com \
--to=patrick.havelange@essensium.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=esben@haabendal.dk \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=leoyang.li@nxp.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=vilhelm.gray@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®