From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Chris Healy <cphealy@gmail.com>,
Lucas Stach <l.stach@pengutronix.de>,
Leonard Crestez <leonard.crestez@nxp.com>,
"A.s. Dong" <aisheng.dong@nxp.com>,
Richard Zhu <hongxing.zhu@nxp.com>,
linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [PATCH 4/5] PCI: dwc: Make use of GENMASK/FIELD_PREP
Date: Tue, 19 Feb 2019 12:02:41 -0800 [thread overview]
Message-ID: <20190219200242.17243-5-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190219200242.17243-1-andrew.smirnov@gmail.com>
Convert various multi-bit fields to be defined using
GENMASK/FIELD_PREP. This way bit field boundaries are defined in a
single place only, as well as defined in a way that makes it easier to
verify them against reference manual. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
---
drivers/pci/controller/dwc/pcie-designware.h | 29 +++++++++++---------
1 file changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 070382869685..8ebfb06584d9 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -11,6 +11,7 @@
#ifndef _PCIE_DESIGNWARE_H
#define _PCIE_DESIGNWARE_H
+#include <linux/bitfield.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/msi.h>
@@ -30,11 +31,12 @@
/* Synopsys-specific PCIe configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
-#define PORT_LINK_MODE_MASK (0x3f << 16)
-#define PORT_LINK_MODE_1_LANES (0x1 << 16)
-#define PORT_LINK_MODE_2_LANES (0x3 << 16)
-#define PORT_LINK_MODE_4_LANES (0x7 << 16)
-#define PORT_LINK_MODE_8_LANES (0xf << 16)
+#define PORT_LINK_MODE_MASK GENMASK(21, 16)
+#define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n)
+#define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1)
+#define PORT_LINK_MODE_2_LANES PORT_LINK_MODE(0x3)
+#define PORT_LINK_MODE_4_LANES PORT_LINK_MODE(0x7)
+#define PORT_LINK_MODE_8_LANES PORT_LINK_MODE(0xf)
#define PCIE_PORT_DEBUG0 0x728
#define PORT_LOGIC_LTSSM_STATE_MASK 0x1f
@@ -42,11 +44,12 @@
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE BIT(17)
-#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
-#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
-#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
-#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
-#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
+#define PORT_LOGIC_LINK_WIDTH_MASK GENMASK(12, 8)
+#define PORT_LOGIC_LINK_WIDTH(n) FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n)
+#define PORT_LOGIC_LINK_WIDTH_1_LANES PORT_LOGIC_LINK_WIDTH(0x1)
+#define PORT_LOGIC_LINK_WIDTH_2_LANES PORT_LOGIC_LINK_WIDTH(0x2)
+#define PORT_LOGIC_LINK_WIDTH_4_LANES PORT_LOGIC_LINK_WIDTH(0x4)
+#define PORT_LOGIC_LINK_WIDTH_8_LANES PORT_LOGIC_LINK_WIDTH(0x8)
#define PCIE_MSI_ADDR_LO 0x820
#define PCIE_MSI_ADDR_HI 0x824
@@ -72,9 +75,9 @@
#define PCIE_ATU_UPPER_BASE 0x910
#define PCIE_ATU_LIMIT 0x914
#define PCIE_ATU_LOWER_TARGET 0x918
-#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
-#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
-#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
+#define PCIE_ATU_BUS(x) FIELD_PREP(GENMASK(31, 24), x)
+#define PCIE_ATU_DEV(x) FIELD_PREP(GENMASK(23, 19), x)
+#define PCIE_ATU_FUNC(x) FIELD_PREP(GENMASK(18, 16), x)
#define PCIE_ATU_UPPER_TARGET 0x91C
#define PCIE_MISC_CONTROL_1_OFF 0x8BC
--
2.20.1
next prev parent reply other threads:[~2019-02-19 20:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 20:02 [PATCH 0/5] DesignWare PCI improvements Andrey Smirnov
2019-02-19 20:02 ` [PATCH 1/5] PCI: dwc: Make use of IS_ALIGNED() Andrey Smirnov
2019-02-19 20:02 ` [PATCH 2/5] PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() Andrey Smirnov
2019-02-19 20:02 ` [PATCH 3/5] PCI: dwc: Make use of BIT() in constant definitions Andrey Smirnov
2019-02-19 20:02 ` Andrey Smirnov [this message]
2019-02-19 20:02 ` [PATCH 5/5] PCI: dwc: Remove superfluous shifting in definitions Andrey Smirnov
2019-02-20 10:26 ` [PATCH 0/5] DesignWare PCI improvements Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190219200242.17243-5-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=aisheng.dong@nxp.com \
--cc=bhelgaas@google.com \
--cc=cphealy@gmail.com \
--cc=fabio.estevam@nxp.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=hongxing.zhu@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®