From: Samuel Holland <samuel@sholland.org>
To: Jassi Brar <jassisinghbrar@gmail.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@googlegroups.com,
Samuel Holland <samuel@sholland.org>
Subject: [PATCH v2 01/10] clk: sunxi-ng: sun8i: Mark the msgbox clock as critical
Date: Thu, 28 Feb 2019 23:29:38 -0600 [thread overview]
Message-ID: <20190301052947.32032-2-samuel@sholland.org> (raw)
In-Reply-To: <20190301052947.32032-1-samuel@sholland.org>
The msgbox clock is critical because the hardware is shared between
Linux and system firmware. The message box may be used by the EL3 secure
monitor's PSCI implementation. On 64-bit sunxi SoCs, this is provided by
ARM TF-A; 32-bit SoCs use a different implementation. The secure monitor
uses the message box to forward requests to power management firmware
running on a separate CPU.
It is not enough for the secure monitor to enable the clock each time
Linux performs a SMC into EL3, as both the firmware and Linux can run
concurrently on separate CPUs. So it is never safe for Linux to turn
this clock off, and it should be marked as critical.
At this time, such power management firmware only exists for the H5.
However, it makes sense to take care of all CCU drivers now for
consistency, and to ease the transition in the future, once firmware is
ported to the other SoCs.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
index a4fa2945f230..22d09cb20326 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
@@ -263,7 +263,7 @@ static SUNXI_CCU_GATE(bus_de_fe_clk, "bus-de-fe", "ahb1",
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
0x064, BIT(20), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
- 0x064, BIT(21), 0);
+ 0x064, BIT(21), CLK_IS_CRITICAL);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
0x064, BIT(22), 0);
static SUNXI_CCU_GATE(bus_drc_clk, "bus-drc", "ahb1",
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
index c7bf814dfd2b..6d25b7a1c81e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
@@ -275,7 +275,7 @@ static SUNXI_CCU_GATE(bus_de_fe_clk, "bus-de-fe", "ahb1",
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
0x064, BIT(20), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
- 0x064, BIT(21), 0);
+ 0x064, BIT(21), CLK_IS_CRITICAL);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
0x064, BIT(22), 0);
static SUNXI_CCU_GATE(bus_drc_clk, "bus-drc", "ahb1",
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
index 2d6555d73170..85809c454b1f 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
@@ -347,7 +347,7 @@ static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
0x064, BIT(20), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
- 0x064, BIT(21), 0);
+ 0x064, BIT(21), CLK_IS_CRITICAL);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
0x064, BIT(22), 0);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index e71e2451c2e3..d09629688fd4 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -281,7 +281,7 @@ static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
0x064, BIT(20), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
- 0x064, BIT(21), 0);
+ 0x064, BIT(21), CLK_IS_CRITICAL);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
0x064, BIT(22), 0);
--
2.19.2
next prev parent reply other threads:[~2019-03-01 5:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-01 5:29 [PATCH v2 00/10] Allwinner sunxi message box support Samuel Holland
2019-03-01 5:29 ` Samuel Holland [this message]
2019-03-01 5:29 ` [PATCH v2 02/10] clk: sunxi-ng: sun9i: Mark the msgbox clock as critical Samuel Holland
2019-03-01 5:29 ` [PATCH v2 03/10] clk: sunxi-ng: sun50i: " Samuel Holland
2019-03-01 17:31 ` Stephen Boyd
2019-03-01 5:29 ` [PATCH v2 04/10] dt-bindings: mailbox: Add a sunxi message box binding Samuel Holland
2019-03-01 5:29 ` [PATCH v2 05/10] mailbox: sunxi-msgbox: Add a new mailbox driver Samuel Holland
2019-03-01 5:29 ` [PATCH v2 06/10] ARM: dts: sunxi: a80: Add msgbox node Samuel Holland
2019-03-01 5:29 ` [PATCH v2 07/10] ARM: dts: sunxi: a83t: " Samuel Holland
2019-03-01 5:29 ` [PATCH v2 08/10] ARM: dts: sunxi: h3/h5: " Samuel Holland
2019-03-01 5:29 ` [PATCH v2 09/10] arm64: dts: allwinner: a64: " Samuel Holland
2019-03-01 5:29 ` [PATCH v2 10/10] arm64: dts: allwinner: h6: " Samuel Holland
2019-03-01 5:53 ` [linux-sunxi] [PATCH v2 00/10] Allwinner sunxi message box support Corentin Labbe
2019-03-01 14:47 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190301052947.32032-2-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=devicetree@vger.kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®