[PATCH 1/3] ASoC: ti: fix davinci_mcasp_probe dependencies

[Arnd Bergmann <arnd@arndb.de>]

The SND_SOC_DAVINCI_MCASP driver can use either edma or sdma as
a back-end, and it takes the presence of the respective dma engine
drivers in the configuration as an indication to which ones should be
built. However, this is flawed in multiple ways:

- With CONFIG_TI_EDMA=m and CONFIG_SND_SOC_DAVINCI_MCASP=y,
  is enabled as =m, and we get a link error:
  sound/soc/ti/davinci-mcasp.o: In function `davinci_mcasp_probe':
  davinci-mcasp.c:(.text+0x930): undefined reference to `edma_pcm_platform_register'

- When CONFIG_SND_SOC_DAVINCI_MCASP=m has already been selected by
  another driver, the same link error appears even if CONFIG_TI_EDMA
  is disabled

There are possibly other issues here, but it seems that the only reasonable
solution is to always build both SND_SOC_TI_EDMA_PCM and
SND_SOC_TI_SDMA_PCM as a dependency here. Both are fairly small and
do not have any other compile-time dependencies, so the cost is
very small, and makes the configuration stage much more consistent.

Fixes: f2055e145f29 ("ASoC: ti: Merge davinci and omap directories")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 sound/soc/ti/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/ti/Kconfig b/sound/soc/ti/Kconfig
index 4bf3c15d4e51..ee7c202c69b7 100644
--- a/sound/soc/ti/Kconfig
+++ b/sound/soc/ti/Kconfig
@@ -21,8 +21,8 @@ config SND_SOC_DAVINCI_ASP
 
 config SND_SOC_DAVINCI_MCASP
 	tristate "Multichannel Audio Serial Port (McASP) support"
-	select SND_SOC_TI_EDMA_PCM if TI_EDMA
-	select SND_SOC_TI_SDMA_PCM if DMA_OMAP
+	select SND_SOC_TI_EDMA_PCM
+	select SND_SOC_TI_SDMA_PCM
 	help
 	  Say Y or M here if you want to have support for McASP IP found in
 	  various Texas Instruments SoCs like:
-- 
2.20.0