From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH] regulator: as3711: Remove struct as3711_regulator_info and as3711_regulator
Date: Wed, 6 Mar 2019 09:01:02 +0800 [thread overview]
Message-ID: <20190306010102.30612-1-axel.lin@ingics.com> (raw)
This driver does not really need struct as3711_regulator_info and
struct as3711_regulator, remove them.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/as3711-regulator.c | 37 ++++++----------------------
1 file changed, 7 insertions(+), 30 deletions(-)
diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c
index f7fe218bb3e4..ece88103f2fd 100644
--- a/drivers/regulator/as3711-regulator.c
+++ b/drivers/regulator/as3711-regulator.c
@@ -17,14 +17,6 @@
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
-struct as3711_regulator_info {
- struct regulator_desc desc;
-};
-
-struct as3711_regulator {
- struct as3711_regulator_info *reg_info;
-};
-
/*
* The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and
* STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes:
@@ -129,7 +121,6 @@ static const struct regulator_linear_range as3711_dldo_ranges[] = {
#define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _sfx) \
[AS3711_REGULATOR_ ## _id] = { \
- .desc = { \
.name = "as3711-regulator-" # _id, \
.id = AS3711_REGULATOR_ ## _id, \
.n_voltages = (_vmask + 1), \
@@ -142,10 +133,9 @@ static const struct regulator_linear_range as3711_dldo_ranges[] = {
.enable_mask = BIT(_en_bit), \
.linear_ranges = as3711_ ## _sfx ## _ranges, \
.n_linear_ranges = ARRAY_SIZE(as3711_ ## _sfx ## _ranges), \
- }, \
}
-static struct as3711_regulator_info as3711_reg_info[] = {
+static const struct regulator_desc as3711_reg_desc[] = {
AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, sd),
AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, sd),
AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, sd),
@@ -161,7 +151,7 @@ static struct as3711_regulator_info as3711_reg_info[] = {
/* StepUp output voltage depends on supplying regulator */
};
-#define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info)
+#define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_desc)
static struct of_regulator_match
as3711_regulator_matches[AS3711_REGULATOR_NUM] = {
@@ -215,11 +205,8 @@ static int as3711_regulator_probe(struct platform_device *pdev)
struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev);
struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = {.dev = &pdev->dev,};
- struct as3711_regulator *reg = NULL;
- struct as3711_regulator *regs;
struct device_node *of_node[AS3711_REGULATOR_NUM] = {};
struct regulator_dev *rdev;
- struct as3711_regulator_info *ri;
int ret;
int id;
@@ -236,30 +223,20 @@ static int as3711_regulator_probe(struct platform_device *pdev)
}
}
- regs = devm_kcalloc(&pdev->dev,
- AS3711_REGULATOR_NUM,
- sizeof(struct as3711_regulator),
- GFP_KERNEL);
- if (!regs)
- return -ENOMEM;
-
- for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) {
- reg = ®s[id];
- reg->reg_info = ri;
-
+ for (id = 0; id < AS3711_REGULATOR_NUM; id++) {
config.init_data = pdata->init_data[id];
- config.driver_data = reg;
config.regmap = as3711->regmap;
config.of_node = of_node[id];
- rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config);
+ rdev = devm_regulator_register(&pdev->dev, &as3711_reg_desc[id],
+ &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register regulator %s\n",
- ri->desc.name);
+ as3711_reg_desc[id].name);
return PTR_ERR(rdev);
}
}
- platform_set_drvdata(pdev, regs);
+
return 0;
}
--
2.17.1
reply other threads:[~2019-03-06 1:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190306010102.30612-1-axel.lin@ingics.com \
--to=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=g.liakhovetski@gmx.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®