From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] clk: qcom: Add QCS404 TuringCC
Date: Wed, 6 Mar 2019 09:47:58 -0800 [thread overview]
Message-ID: <20190306174758.22462-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190306174758.22462-1-bjorn.andersson@linaro.org>
The Turing Clock Controller provides resources related to running the
Turing subsystem.
PM runtime is used to ensure that the associated AHB clock is ticking
while the clock framework is accessing the registers in the Turing clock
controller.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/clk/qcom/Kconfig | 6 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/turingcc-qcs404.c | 170 +++++++++++++++++++++++++++++
3 files changed, 177 insertions(+)
create mode 100644 drivers/clk/qcom/turingcc-qcs404.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 1c04575c118f..18bdf34d5e64 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -243,6 +243,12 @@ config SDM_GCC_660
Say Y if you want to use peripheral devices such as UART, SPI,
i2C, USB, UFS, SDDC, PCIe, etc.
+config QCS_TURING_404
+ tristate "QCS404 Turing Clock Controller"
+ help
+ Support for the Turing Clock Controller on QCS404, provides clocks
+ and resets for the Turing subsystem.
+
config SDM_GCC_845
tristate "SDM845 Global Clock Controller"
select QCOM_GDSC
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index ee8d0698e370..f0768fb1f037 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o
+obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
diff --git a/drivers/clk/qcom/turingcc-qcs404.c b/drivers/clk/qcom/turingcc-qcs404.c
new file mode 100644
index 000000000000..aa859e6ec9bd
--- /dev/null
+++ b/drivers/clk/qcom/turingcc-qcs404.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,turingcc-qcs404.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+#include "reset.h"
+
+static struct clk_branch turing_wrapper_aon_cbcr = {
+ .halt_reg = 0x5098,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x5098,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data) {
+ .name = "turing_wrapper_aon_clk",
+ .ops = &clk_branch2_aon_ops,
+ },
+ },
+};
+
+static struct clk_branch turing_q6ss_ahbm_aon_cbcr = {
+ .halt_reg = 0x9000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x9000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data) {
+ .name = "turing_q6ss_ahbm_aon_cbcr",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch turing_q6ss_q6_axim_clk = {
+ .halt_reg = 0xb000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data) {
+ .name = "turing_q6ss_q6_axim_clk",
+ .ops = &clk_branch2_aon_ops,
+ },
+ },
+};
+
+static struct clk_branch turing_q6ss_ahbs_aon_cbcr = {
+ .halt_reg = 0x10000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x10000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data) {
+ .name = "turing_q6ss_ahbs_aon_clk",
+ .ops = &clk_branch2_aon_ops,
+ },
+ },
+};
+
+static struct clk_branch turing_wrapper_qos_ahbs_aon_cbcr = {
+ .halt_reg = 0x11014,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x11014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data) {
+ .name = "turing_wrapper_qos_ahbs_aon_clk",
+ .ops = &clk_branch2_aon_ops,
+ },
+ },
+};
+
+static struct clk_regmap *turingcc_clocks[] = {
+ [TURING_WRAPPER_AON_CLK] = &turing_wrapper_aon_cbcr.clkr,
+ [TURING_Q6SS_AHBM_AON_CLK] = &turing_q6ss_ahbm_aon_cbcr.clkr,
+ [TURING_Q6SS_Q6_AXIM_CLK] = &turing_q6ss_q6_axim_clk.clkr,
+ [TURING_Q6SS_AHBS_AON_CLK] = &turing_q6ss_ahbs_aon_cbcr.clkr,
+ [TURING_WRAPPER_QOS_AHBS_AON_CLK] = &turing_wrapper_qos_ahbs_aon_cbcr.clkr,
+};
+
+static const struct regmap_config turingcc_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x30000,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc turingcc_desc = {
+ .config = &turingcc_regmap_config,
+ .clks = turingcc_clocks,
+ .num_clks = ARRAY_SIZE(turingcc_clocks),
+};
+
+static int turingcc_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_clk_create(&pdev->dev);
+ if (ret)
+ goto disable_pm_runtime;
+
+ ret = pm_clk_add(&pdev->dev, NULL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to acquire iface clock\n");
+ goto destroy_pm_clk;
+ }
+
+ ret = qcom_cc_probe(pdev, &turingcc_desc);
+ if (ret < 0)
+ goto destroy_pm_clk;
+
+ return 0;
+
+destroy_pm_clk:
+ pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+ pm_runtime_disable(&pdev->dev);
+
+ return ret;
+}
+
+static int turingcc_remove(struct platform_device *pdev)
+{
+ pm_clk_destroy(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops turingcc_pm_ops = {
+ SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static const struct of_device_id turingcc_match_table[] = {
+ { .compatible = "qcom,qcs404-turingcc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, turingcc_match_table);
+
+static struct platform_driver turingcc_driver = {
+ .probe = turingcc_probe,
+ .remove = turingcc_remove,
+ .driver = {
+ .name = "qcs404-turingcc",
+ .of_match_table = turingcc_match_table,
+ .pm = &turingcc_pm_ops,
+ },
+};
+
+module_platform_driver(turingcc_driver);
+
+MODULE_DESCRIPTION("Qualcomm QCS404 Turing Clock Controller");
+MODULE_LICENSE("GPL v2");
--
2.18.0
next prev parent reply other threads:[~2019-03-06 17:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-06 17:47 [PATCH 0/3] Qualcomm QCS404 Turing Clock Controller Bjorn Andersson
2019-03-06 17:47 ` [PATCH 1/3] dt-bindings: clock: Introduce Qualcomm Turing Clock controller Bjorn Andersson
2019-03-27 23:34 ` Rob Herring
2019-04-11 20:35 ` Stephen Boyd
2019-03-06 17:47 ` [PATCH 2/3] clk: qcom: branch: Add AON clock ops Bjorn Andersson
2019-04-11 20:36 ` Stephen Boyd
2019-03-06 17:47 ` Bjorn Andersson [this message]
2019-04-11 20:36 ` [PATCH 3/3] clk: qcom: Add QCS404 TuringCC Stephen Boyd
2019-04-11 20:36 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190306174758.22462-4-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®