mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>,
	Sasha Levin <sashal@kernel.org>,
	devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 23/48] ARM: dts: armada-xp: fix Armada XP boards NAND description
Date: Wed, 13 Mar 2019 15:12:25 -0400	[thread overview]
Message-ID: <20190313191250.158955-23-sashal@kernel.org> (raw)
In-Reply-To: <20190313191250.158955-1-sashal@kernel.org>

From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

[ Upstream commit 6fc979179c98d2591784937d5618edc3e5cd31c1 ]

Commit 3b79919946cd2cf4dac47842afc9a893acec4ed7 ("ARM: dts:
armada-370-xp: update NAND node with new bindings") updated some
Marvell Armada DT description to use the new NAND controller bindings,
but did it incorrectly for a number of boards: armada-xp-gp,
armada-xp-db and armada-xp-lenovo-ix4-300d. Due to this, the NAND is
no longer detected on those platforms.

This commit fixes that by properly using the new NAND DT binding. This
commit was runtime-tested on Armada XP GP, the two other platforms are
only compile-tested.

Fixes: 3b79919946cd2 ("ARM: dts: armada-370-xp: update NAND node with new bindings")
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/armada-xp-db.dts            | 46 +++++-----
 arch/arm/boot/dts/armada-xp-gp.dts            | 13 +--
 .../boot/dts/armada-xp-lenovo-ix4-300d.dts    | 85 ++++++++++---------
 3 files changed, 76 insertions(+), 68 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f3ac7483afed..5d04dc68cf57 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -144,30 +144,32 @@
 				status = "okay";
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x800000>;
-					};
-					partition@800000 {
-						label = "Linux";
-						reg = <0x800000 0x800000>;
-					};
-					partition@1000000 {
-						label = "Filesystem";
-						reg = <0x1000000 0x3f000000>;
 
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "U-Boot";
+							reg = <0 0x800000>;
+						};
+						partition@800000 {
+							label = "Linux";
+							reg = <0x800000 0x800000>;
+						};
+						partition@1000000 {
+							label = "Filesystem";
+							reg = <0x1000000 0x3f000000>;
+						};
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 1139e9469a83..b4cca507cf13 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -160,12 +160,15 @@
 				status = "okay";
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index bbbb38888bb8..87dcb502f72d 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -81,49 +81,52 @@
 
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x00000000 0x000e0000>;
-						read-only;
-					};
-
-					partition@e0000 {
-						label = "u-boot-env";
-						reg = <0x000e0000 0x00020000>;
-						read-only;
-					};
-
-					partition@100000 {
-						label = "u-boot-env2";
-						reg = <0x00100000 0x00020000>;
-						read-only;
-					};
-
-					partition@120000 {
-						label = "zImage";
-						reg = <0x00120000 0x00400000>;
-					};
-
-					partition@520000 {
-						label = "initrd";
-						reg = <0x00520000 0x00400000>;
-					};
 
-					partition@e00000 {
-						label = "boot";
-						reg = <0x00e00000 0x3f200000>;
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x000e0000>;
+							read-only;
+						};
+
+						partition@e0000 {
+							label = "u-boot-env";
+							reg = <0x000e0000 0x00020000>;
+							read-only;
+						};
+
+						partition@100000 {
+							label = "u-boot-env2";
+							reg = <0x00100000 0x00020000>;
+							read-only;
+						};
+
+						partition@120000 {
+							label = "zImage";
+							reg = <0x00120000 0x00400000>;
+						};
+
+						partition@520000 {
+							label = "initrd";
+							reg = <0x00520000 0x00400000>;
+						};
+
+						partition@e00000 {
+							label = "boot";
+							reg = <0x00e00000 0x3f200000>;
+						};
 					};
 				};
 			};
-- 
2.19.1


  parent reply	other threads:[~2019-03-13 19:28 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-13 19:12 [PATCH AUTOSEL 4.19 01/48] clk: sunxi-ng: v3s: Fix TCON reset de-assert bit Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 02/48] kallsyms: Handle too long symbols in kallsyms.c Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 03/48] clk: sunxi: A31: Fix wrong AHB gate number Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 04/48] esp: Skip TX bytes accounting when sending from a request socket Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 05/48] ARM: 8824/1: fix a migrating irq bug when hotplug cpu Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 06/48] bpf: only adjust gso_size on bytestream protocols Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 07/48] bpf: fix lockdep false positive in stackmap Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 08/48] af_key: unconditionally clone on broadcast Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 09/48] ARM: 8835/1: dma-mapping: Clear DMA ops on teardown Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 10/48] assoc_array: Fix shortcut creation Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 11/48] keys: Fix dependency loop between construction record and auth key Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 12/48] scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 13/48] net: systemport: Fix reception of BPDUs Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 14/48] net: dsa: bcm_sf2: Do not assume DSA master supports WoL Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 15/48] pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 16/48] qmi_wwan: apply SET_DTR quirk to Sierra WP7607 Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 17/48] net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe() Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 18/48] xfrm: Fix inbound traffic via XFRM interfaces across network namespaces Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 19/48] mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issue Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 20/48] ASoC: topology: free created components in tplg load error Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 21/48] qed: Fix iWARP buffer size provided for syn packet processing Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 22/48] qed: Fix iWARP syn packet mac address validation Sasha Levin
2019-03-13 19:12 ` Sasha Levin [this message]
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 24/48] arm64: Relax GIC version check during early boot Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 25/48] ARM: tegra: Restore DT ABI on Tegra124 Chromebooks Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 26/48] net: marvell: mvneta: fix DMA debug warning Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 27/48] kasan, slub: move kasan_poison_slab hook before page_address Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 28/48] mm: handle lru_add_drain_all for UP properly Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 29/48] tmpfs: fix link accounting when a tmpfile is linked in Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 30/48] kasan, slab: fix conflicts with CONFIG_HARDENED_USERCOPY Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 31/48] kasan, slab: make freelist stored without tags Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 32/48] ixgbe: fix older devices that do not support IXGBE_MRQC_L3L4TXSWEN Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 33/48] ARCv2: lib: memcpy: fix doing prefetchw outside of buffer Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 34/48] ARC: uacces: remove lp_start, lp_end from clobber list Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 35/48] ARCv2: support manual regfile save on interrupts Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 36/48] ARCv2: don't assume core 0x54 has dual issue Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 37/48] phonet: fix building with clang Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 38/48] mac80211_hwsim: propagate genlmsg_reply return code Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 39/48] bpf, lpm: fix lookup bug in map_delete_elem Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 40/48] net: thunderx: make CFG_DONE message to run through generic send-ack sequence Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 41/48] net: thunderx: add nicvf_send_msg_to_pf result check for set_rx_mode_task Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 42/48] nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 43/48] nfp: bpf: fix ALU32 high bits clearance bug Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 44/48] bnxt_en: Fix typo in firmware message timeout logic Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 45/48] bnxt_en: Wait longer for the firmware message response to complete Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 46/48] mdio_bus: Fix use-after-free on device_register fails Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 47/48] net: set static variable an initial value in atl2_probe() Sasha Levin
2019-03-13 19:12 ` [PATCH AUTOSEL 4.19 48/48] selftests: fib_tests: sleep after changing carrier. again Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190313191250.158955-23-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=stable@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®