From: Evan Green <evgreen@chromium.org>
To: Benson Leung <bleung@chromium.org>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Furquan Shaikh <furquan@chromium.org>,
Rajat Jain <rajatja@chromium.org>,
Evan Green <evgreen@chromium.org>,
linux-kernel@vger.kernel.org, Guenter Roeck <groeck@chromium.org>,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 1/2] mfd: cros_ec: Add host_sleep_event_v1 command
Date: Wed, 20 Mar 2019 14:20:29 -0700 [thread overview]
Message-ID: <20190320212030.43682-2-evgreen@chromium.org> (raw)
In-Reply-To: <20190320212030.43682-1-evgreen@chromium.org>
Introduce the command and response structures for the second revision
of the host sleep event. These structures are part of a new EC change
that enables detection of failure to enter S0ix. The EC waits a
kernel-specified timeout (or a default amount of time) for the S0_SLP
pin to change, and wakes the system if that change does not occur in
time.
Signed-off-by: Evan Green <evgreen@chromium.org>
---
include/linux/mfd/cros_ec_commands.h | 59 ++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index fc91082d4c35..4db1240c28a8 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2729,6 +2729,65 @@ struct ec_params_host_sleep_event {
uint8_t sleep_event;
} __packed;
+/*
+ * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep
+ * transition failures
+ */
+#define EC_HOST_SLEEP_TIMEOUT_DEFAULT 0
+
+/* Disable timeout detection for this sleep transition */
+#define EC_HOST_SLEEP_TIMEOUT_INFINITE 0xFFFF
+
+struct ec_params_host_sleep_event_v1 {
+ /* The type of sleep being entered or exited. */
+ uint8_t sleep_event;
+
+ /* Padding */
+ uint8_t reserved;
+ union {
+ /* Parameters that apply for suspend messages. */
+ struct {
+ /*
+ * The timeout in milliseconds between when this message
+ * is received and when the EC will declare sleep
+ * transition failure if the sleep signal is not
+ * asserted.
+ */
+ uint16_t sleep_timeout_ms;
+ } suspend_params;
+
+ /* Reserved space for non-suspend commands. */
+ uint16_t reserved;
+ } u;
+} __packed;
+
+/* A timeout occurred when this bit is set */
+#define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000
+
+/*
+ * The mask defining which bits correspond to the number of sleep transitions,
+ * as well as the maximum number of suspend line transitions that will be
+ * reported back to the host.
+ */
+#define EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK 0x7FFFFFFF
+
+struct ec_response_host_sleep_event_v1 {
+ union {
+ /* Response fields that apply for resume messages. */
+ struct {
+ /*
+ * The number of sleep power signal transitions that
+ * occurred since the suspend message. The high bit
+ * indicates a timeout occurred.
+ */
+ uint32_t sleep_transitions;
+ } resume_response;
+
+ /* Padding for non-resume responses. */
+ uint32_t reserved;
+ } u;
+} __packed;
+
/*****************************************************************************/
/* Smart battery pass-through */
--
2.20.1
next prev parent reply other threads:[~2019-03-20 21:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-20 21:20 [PATCH 0/2] platform/chrome: Add support for host sleep event command v1 Evan Green
2019-03-20 21:20 ` Evan Green [this message]
2019-03-21 21:31 ` [PATCH 1/2] mfd: cros_ec: Add host_sleep_event_v1 command Enric Balletbo Serra
2019-03-22 15:37 ` Evan Green
2019-03-22 15:42 ` Enric Balletbo Serra
2019-03-20 21:20 ` [PATCH 2/2] platform/chrome: Add support for v1 of host sleep event Evan Green
2019-03-21 15:14 ` Guenter Roeck
2019-03-22 18:39 ` Evan Green
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190320212030.43682-2-evgreen@chromium.org \
--to=evgreen@chromium.org \
--cc=bleung@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=furquan@chromium.org \
--cc=groeck@chromium.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rajatja@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®