From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, "Andrew F . Davis" <afd@ti.com>,
Axel Lin <axel.lin@ingics.com>
Subject: [PATCH RESEND] regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB
Date: Thu, 21 Mar 2019 16:39:19 +0800 [thread overview]
Message-ID: <20190321083919.6334-1-axel.lin@ingics.com> (raw)
selector 0xB (1011) should be 2.6V rather than 2.7V, fit ix.
Table 5-4. LDOA1 Output Voltage Options
VID Bits VOUT VID Bits VOUT VID Bits VOUT VID Bits VOUT
0000 1.35 0100 1.8 1000 2.3 1100 2.85
0001 1.5 0101 1.9 1001 2.4 1101 3.0
0010 1.6 0110 2.0 1010 2.5 1110 3.3
0011 1.7 0111 2.1 1011 2.6 1111 Not Used
Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Andrew F. Davis <afd@ti.com>
---
This patch was sent on https://lkml.org/lkml/2019/3/4/349
With Andrew's Acked.
drivers/regulator/tps65086-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index 45e96e154690..5a5e9b5bf4be 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -90,8 +90,8 @@ static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {
REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0),
REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000),
- REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xA, 100000),
- REGULATOR_LINEAR_RANGE(2700000, 0xB, 0xD, 150000),
+ REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000),
+ REGULATOR_LINEAR_RANGE(2850000, 0xC, 0xD, 150000),
REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0),
};
--
2.17.1
reply other threads:[~2019-03-21 8:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190321083919.6334-1-axel.lin@ingics.com \
--to=axel.lin@ingics.com \
--cc=afd@ti.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®