From: Anup Patel <Anup.Patel@wdc.com>
To: Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>
Cc: Atish Patra <Atish.Patra@wdc.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Christoph Hellwig <hch@infradead.org>,
Mike Rapoport <rppt@linux.ibm.com>,
"linux-riscv@lists.infradead.org"
<linux-riscv@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Anup Patel <Anup.Patel@wdc.com>
Subject: [PATCH v2 1/5] RISC-V: Add separate defconfig for 32bit systems
Date: Thu, 21 Mar 2019 09:47:43 +0000 [thread overview]
Message-ID: <20190321094710.16552-2-anup.patel@wdc.com> (raw)
In-Reply-To: <20190321094710.16552-1-anup.patel@wdc.com>
This patch adds rv32_defconfig for 32bit systems. The only
difference between rv32_defconfig and defconfig is that
rv32_defconfig has CONFIG_ARCH_RV32I=y.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
arch/riscv/configs/rv32_defconfig | 84 +++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
create mode 100644 arch/riscv/configs/rv32_defconfig
diff --git a/arch/riscv/configs/rv32_defconfig b/arch/riscv/configs/rv32_defconfig
new file mode 100644
index 000000000000..1a911ed8e772
--- /dev/null
+++ b/arch/riscv/configs/rv32_defconfig
@@ -0,0 +1,84 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_CGROUP_BPF=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_CHECKPOINT_RESTORE=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_ARCH_RV32I=y
+CONFIG_SMP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NETLINK_DIAG=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCIE_XILINX=y
+CONFIG_DEVTMPFS=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_MACB=y
+CONFIG_E1000E=y
+CONFIG_R8169=y
+CONFIG_MICROSEMI_PHY=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
+CONFIG_HVC_RISCV_SBI=y
+# CONFIG_PTP_1588_CLOCK is not set
+CONFIG_DRM=y
+CONFIG_DRM_RADEON=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_UAS=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_SIFIVE_PLIC=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_CRYPTO_USER_API_HASH=y
+CONFIG_CRYPTO_DEV_VIRTIO=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_RCU_TRACE is not set
--
2.17.1
next prev parent reply other threads:[~2019-03-21 9:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-21 9:47 [PATCH v2 0/5] Boot RISC-V kernel from any 4KB aligned address Anup Patel
2019-03-21 9:47 ` Anup Patel [this message]
2019-03-21 9:47 ` [PATCH v2 2/5] RISC-V: Make setup_vm() independent of GCC code model Anup Patel
2019-03-23 15:45 ` Mike Rapoport
2019-03-25 4:19 ` Anup Patel
2019-03-21 9:47 ` [PATCH v2 3/5] RISC-V: Allow booting kernel from any 4KB aligned address Anup Patel
2019-03-23 15:40 ` Mike Rapoport
2019-03-23 17:24 ` Christoph Hellwig
2019-03-24 4:16 ` Anup Patel
2019-03-24 3:32 ` Anup Patel
2019-03-21 9:47 ` [PATCH v2 4/5] RISC-V: Remove redundant trampoline page table Anup Patel
2019-03-22 13:33 ` Christoph Hellwig
2019-03-25 4:17 ` Anup Patel
2019-03-21 9:47 ` [PATCH v2 5/5] RISC-V: Fix memory reservation in setup_bootmem() Anup Patel
2019-03-22 13:31 ` Christoph Hellwig
2019-03-23 15:44 ` Mike Rapoport
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190321094710.16552-2-anup.patel@wdc.com \
--to=anup.patel@wdc.com \
--cc=Atish.Patra@wdc.com \
--cc=aou@eecs.berkeley.edu \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@sifive.com \
--cc=paul.walmsley@sifive.com \
--cc=rppt@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®