mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: maxime.ripard@bootlin.com, a.hajda@samsung.com, airlied@linux.ie,
	daniel@ffwll.ch, wens@csie.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver
Date: Mon, 25 Mar 2019 03:35:31 +0200	[thread overview]
Message-ID: <20190325013531.GB4540@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20190324212144.3652-2-jernej.skrabec@siol.net>

Hi Jernej,

Thank you for the patch.

On Sun, Mar 24, 2019 at 10:21:42PM +0100, Jernej Skrabec wrote:
> DW HDMI controller on some Allwinner SoCs has support for CEC, but due
> to additional logic put between CEC controller and pins, it doesn't work
> correctly, at least not with a lot of instrusive changes. Fortunately,
> it's still possible to bitbang protocol.
> 
> For such cases, add a platform option to suppress loading CEC driver. If
> DW HDMI CEC driver would be loaded, it wouldn't work anyway and only
> cause a confusion with multiple /dev entries.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
>  include/drm/bridge/dw_hdmi.h              | 2 ++
>  2 files changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index a63e5f0dae56..fdda26f8b056 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2634,7 +2634,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
>  		hdmi->audio = platform_device_register_full(&pdevinfo);
>  	}
>  
> -	if (config0 & HDMI_CONFIG0_CEC) {
> +	if (!plat_data->is_cec_unusable && (config0 & HDMI_CONFIG0_CEC)) {
>  		cec.hdmi = hdmi;
>  		cec.ops = &dw_hdmi_cec_ops;
>  		cec.irq = irq;
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 66e70770cce5..764b8bcfa62c 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -144,6 +144,8 @@ struct dw_hdmi_plat_data {
>  	int (*configure_phy)(struct dw_hdmi *hdmi,
>  			     const struct dw_hdmi_plat_data *pdata,
>  			     unsigned long mpixelclock);
> +
> +	unsigned int is_cec_unusable : 1;

Strictly speaking your CEC controller isn't unusable, it's just a bit
difficult to use it according to your commit message. Would disable_cec
be a more appropriate field name ? And how difficult would it be to
support the hardware CEC controller, would that result in changes that
could be useful to other vendors too ?

>  };
>  
>  struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2019-03-25  1:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-24 21:21 [PATCH 0/2] drm/sun4i: dw-hdmi: Improve CEC support Jernej Skrabec
2019-03-24 21:21 ` [PATCH 1/2] drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver Jernej Skrabec
2019-03-25  1:35   ` Laurent Pinchart [this message]
2019-03-25  6:18     ` Jernej Škrabec
2019-03-25  8:33     ` Neil Armstrong
2019-03-24 21:21 ` [PATCH 2/2] drm/sun4i: dw-hdmi: Bit bang CEC on some SoCs Jernej Skrabec
2021-04-16  9:27 [PATCH 0/2] drm/bridge: dw-hdmi: disable loading of DW-HDMI CEC sub-driver Neil Armstrong
2021-04-16  9:27 ` [PATCH 1/2] drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190325013531.GB4540@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@siol.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.ripard@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®