From: Nava kishore Manne <nava.manne@xilinx.com>
To: <atull@kernel.org>, <mdf@kernel.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <michal.simek@xilinx.com>,
<rajanv@xilinx.com>, <jollys@xilinx.com>, <nava.manne@xilinx.com>,
<linux-fpga@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <chinnikishore369@gmail.com>
Subject: [PATCH v5 0/6]dt-bindings: Firmware node binding for ZynqMP core
Date: Tue, 26 Mar 2019 20:01:23 +0530 [thread overview]
Message-ID: <20190326143129.2608-1-nava.manne@xilinx.com> (raw)
Base firmware node and clock child node binding are part of mainline kernel.
This patchset adds documentation to describe rest of the firmware child node bindings.
Complete firmware DT node example is shown below for ease of understanding:
firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";
#power-domain-cells = <1>;
#reset-cells = <1>;
zynqmp_clk: clock-controller {
#clock-cells = <1>;
compatible = "xlnx,zynqmp-clk";
clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>;
clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
};
zynqmp_power: zynqmp-power {
compatible = "xlnx,zynqmp-power";
interrupts = <0 35 4>;
};
zynqmp_reset: reset-controller {
compatible = "xlnx,zynqmp-reset";
#reset-cells = <1>;
};
nvmem_firmware {
compatible = "xlnx,zynqmp-nvmem-fw";
#address-cells = <1>;
#size-cells = <1>;
/* Data cells */
soc_revision: soc_revision {
reg = <0x0 0x4>;
};
};
pinctrl0: pinctrl@ff180000 {
compatible = "xlnx,zynqmp-pinctrl";
pinctrl_uart1_default: uart1-default {
mux {
groups = "uart0_4_grp";
function = "uart0";
};
conf {
groups = "uart0_4_grp";
slew-rate = <SLEW_RATE_SLOW>;
io-standard = <IO_STANDARD_LVCMOS18>;
};
conf-rx {
pins = "MIO18";
bias-high-impedance;
};
conf-tx {
pins = "MIO19";
bias-disable;
schmitt-cmos = <PIN_INPUT_TYPE_CMOS>;
};
};
};
zynqmp_pcap: pcap {
compatible = "xlnx,zynqmp-pcap-fpga";
};
};
};
Nava kishore Manne (3):
dt-bindings: reset: Add bindings for ZynqMP reset driver
dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
Rajan Vaja (3):
dt-bindings: power: Add ZynqMP power domain bindings
dt-bindings: soc: Add ZynqMP PM bindings
dt-bindings: pinctrl: Add ZynqMP pin controller bindings
.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 25 ++
.../bindings/nvmem/xlnx,zynqmp-nvmem.txt | 47 +++
.../bindings/pinctrl/xlnx,zynqmp-pinctrl.txt | 275 ++++++++++++++++++
.../power/reset/xlnx,zynqmp-power.txt | 25 ++
.../bindings/power/xlnx,zynqmp-genpd.txt | 34 +++
.../bindings/reset/xlnx,zynqmp-reset.txt | 52 ++++
include/dt-bindings/power/xlnx-zynqmp-power.h | 39 +++
.../dt-bindings/reset/xlnx-zynqmp-resets.h | 130 +++++++++
8 files changed, 627 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
create mode 100644 Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
create mode 100644 Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h
create mode 100644 include/dt-bindings/reset/xlnx-zynqmp-resets.h
--
2.18.0
next reply other threads:[~2019-03-26 14:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-26 14:31 Nava kishore Manne [this message]
2019-03-26 14:31 ` [PATCH v5 1/6] dt-bindings: power: Add ZynqMP power domain bindings Nava kishore Manne
2019-03-26 14:31 ` [PATCH v5 2/6] dt-bindings: soc: Add ZynqMP PM bindings Nava kishore Manne
2019-03-26 14:31 ` [PATCH v5 3/6] dt-bindings: reset: Add bindings for ZynqMP reset driver Nava kishore Manne
2019-03-26 14:31 ` [PATCH v5 4/6] dt-bindings: pinctrl: Add ZynqMP pin controller bindings Nava kishore Manne
2019-03-26 14:31 ` [PATCH v5 5/6] dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver Nava kishore Manne
2019-03-26 14:31 ` [PATCH v5 6/6] dt-bindings: fpga: Add bindings for ZynqMP fpga driver Nava kishore Manne
2019-03-28 17:00 ` Rob Herring
2019-04-01 20:50 ` Alan Tull
2019-04-01 22:05 ` Moritz Fischer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190326143129.2608-1-nava.manne@xilinx.com \
--to=nava.manne@xilinx.com \
--cc=atull@kernel.org \
--cc=chinnikishore369@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jollys@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mdf@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=rajanv@xilinx.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®