From: Mircea Caprioru <mircea.caprioru@analog.com>
To: <jic23@kernel.org>
Cc: <Michael.Hennerich@analog.com>, <stefan.popa@analog.com>,
<lars@metafoo.de>, <gregkh@linuxfoundation.org>,
<linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>,
Mircea Caprioru <mircea.caprioru@analog.com>
Subject: [PATCH] iio: dac: ad5758: Modifications for new revision
Date: Tue, 9 Apr 2019 16:35:21 +0300 [thread overview]
Message-ID: <20190409133521.24828-1-mircea.caprioru@analog.com> (raw)
This patch will ensure compatibility with the new revision of the AD5758
dac converter. The modifications consist of removing the fault_prot_switch
function since this option is no longer available, and enabling the
ENABLE_PPC_BUFFERS bit in ADC_CONFIG register before setting the PPC
current mode.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
---
drivers/iio/dac/ad5758.c | 55 +++++++++++++---------------------------
1 file changed, 18 insertions(+), 37 deletions(-)
diff --git a/drivers/iio/dac/ad5758.c b/drivers/iio/dac/ad5758.c
index 2bdf1b0aee06..a513c70faefa 100644
--- a/drivers/iio/dac/ad5758.c
+++ b/drivers/iio/dac/ad5758.c
@@ -72,8 +72,6 @@
#define AD5758_DCDC_CONFIG1_DCDC_VPROG_MODE(x) (((x) & 0x1F) << 0)
#define AD5758_DCDC_CONFIG1_DCDC_MODE_MSK GENMASK(6, 5)
#define AD5758_DCDC_CONFIG1_DCDC_MODE_MODE(x) (((x) & 0x3) << 5)
-#define AD5758_DCDC_CONFIG1_PROT_SW_EN_MSK BIT(7)
-#define AD5758_DCDC_CONFIG1_PROT_SW_EN_MODE(x) (((x) & 0x1) << 7)
/* AD5758_DCDC_CONFIG2 */
#define AD5758_DCDC_CONFIG2_ILIMIT_MSK GENMASK(3, 1)
@@ -84,6 +82,10 @@
/* AD5758_DIGITAL_DIAG_RESULTS */
#define AD5758_CAL_MEM_UNREFRESHED_MSK BIT(15)
+/* AD5758_ADC_CONFIG */
+#define AD5758_ADC_CONFIG_PPC_BUF_EN(x) (((x) & 0x1) << 11)
+#define AD5758_ADC_CONFIG_PPC_BUF_MSK BIT(11)
+
#define AD5758_WR_FLAG_MSK(x) (0x80 | ((x) & 0x1F))
#define AD5758_FULL_SCALE_MICRO 65535000000ULL
@@ -315,6 +317,18 @@ static int ad5758_set_dc_dc_conv_mode(struct ad5758_state *st,
{
int ret;
+ /*
+ * The ENABLE_PPC_BUFFERS bit must be set prior to enabling PPC current
+ * mode.
+ */
+ if (mode == AD5758_DCDC_MODE_PPC_CURRENT) {
+ ret = ad5758_spi_write_mask(st, AD5758_ADC_CONFIG,
+ AD5758_ADC_CONFIG_PPC_BUF_MSK,
+ AD5758_ADC_CONFIG_PPC_BUF_EN(1));
+ if (ret < 0)
+ return ret;
+ }
+
ret = ad5758_spi_write_mask(st, AD5758_DCDC_CONFIG1,
AD5758_DCDC_CONFIG1_DCDC_MODE_MSK,
AD5758_DCDC_CONFIG1_DCDC_MODE_MODE(mode));
@@ -444,23 +458,6 @@ static int ad5758_set_out_range(struct ad5758_state *st, int range)
AD5758_CAL_MEM_UNREFRESHED_MSK);
}
-static int ad5758_fault_prot_switch_en(struct ad5758_state *st, bool enable)
-{
- int ret;
-
- ret = ad5758_spi_write_mask(st, AD5758_DCDC_CONFIG1,
- AD5758_DCDC_CONFIG1_PROT_SW_EN_MSK,
- AD5758_DCDC_CONFIG1_PROT_SW_EN_MODE(enable));
- if (ret < 0)
- return ret;
- /*
- * Poll the BUSY_3WI bit in the DCDC_CONFIG2 register until it is 0.
- * This allows the 3-wire interface communication to complete.
- */
- return ad5758_wait_for_task_complete(st, AD5758_DCDC_CONFIG2,
- AD5758_DCDC_CONFIG2_BUSY_3WI_MSK);
-}
-
static int ad5758_internal_buffers_en(struct ad5758_state *st, bool enable)
{
int ret;
@@ -585,8 +582,8 @@ static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev,
{
struct ad5758_state *st = iio_priv(indio_dev);
bool pwr_down;
- unsigned int dcdc_config1_mode, dc_dc_mode, dac_config_mode, val;
- unsigned long int dcdc_config1_msk, dac_config_msk;
+ unsigned int dc_dc_mode, dac_config_mode, val;
+ unsigned long int dac_config_msk;
int ret;
ret = kstrtobool(buf, &pwr_down);
@@ -602,17 +599,6 @@ static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev,
val = 1;
}
- dcdc_config1_mode = AD5758_DCDC_CONFIG1_DCDC_MODE_MODE(dc_dc_mode) |
- AD5758_DCDC_CONFIG1_PROT_SW_EN_MODE(val);
- dcdc_config1_msk = AD5758_DCDC_CONFIG1_DCDC_MODE_MSK |
- AD5758_DCDC_CONFIG1_PROT_SW_EN_MSK;
-
- ret = ad5758_spi_write_mask(st, AD5758_DCDC_CONFIG1,
- dcdc_config1_msk,
- dcdc_config1_mode);
- if (ret < 0)
- goto err_unlock;
-
dac_config_mode = AD5758_DAC_CONFIG_OUT_EN_MODE(val) |
AD5758_DAC_CONFIG_INT_EN_MODE(val);
dac_config_msk = AD5758_DAC_CONFIG_OUT_EN_MSK |
@@ -841,11 +827,6 @@ static int ad5758_init(struct ad5758_state *st)
return ret;
}
- /* Enable the VIOUT fault protection switch (FPS is closed) */
- ret = ad5758_fault_prot_switch_en(st, 1);
- if (ret < 0)
- return ret;
-
/* Power up the DAC and internal (INT) amplifiers */
ret = ad5758_internal_buffers_en(st, 1);
if (ret < 0)
--
2.17.1
next reply other threads:[~2019-04-09 13:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-09 13:35 Mircea Caprioru [this message]
2019-04-14 13:02 ` Jonathan Cameron
2019-04-15 10:49 ` Caprioru, Mircea
[not found] ` <CAC+2QaGbUtoSRnkcD-LrHC27t-m1NBY_v86w2iAwdpkHisPrJQ@mail.gmail.com>
2019-04-22 9:31 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190409133521.24828-1-mircea.caprioru@analog.com \
--to=mircea.caprioru@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stefan.popa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®