Re: [PATCH RFC] clk: ux500: add range to usleep_range

[Nicholas Mc Guire <der.herr@hofr.at>]

On Wed, Apr 10, 2019 at 03:53:51PM -0700, Stephen Boyd wrote:
> Quoting Nicholas Mc Guire (2019-04-06 20:13:24)
> > Providing a range for usleep_range() allows the hrtimer subsystem to
> > coalesce timers - the delay is runtime configurable so a factor 2
> > is taken to provide the range.
> > 
> > Signed-off-by: Nicholas Mc Guire <hofrat@opentech.at>
> > ---
> 
> I think this driver is in maintenance mode. I'll wait for Ulf to ack or
> review this change before applying.
> 
> > diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
> > index 7c0403b..a1fa3fb 100644
> > --- a/drivers/clk/ux500/clk-sysctrl.c
> > +++ b/drivers/clk/ux500/clk-sysctrl.c
> > @@ -42,7 +42,7 @@ static int clk_sysctrl_prepare(struct clk_hw *hw)
> >                                 clk->reg_bits[0]);
> >  
> >         if (!ret && clk->enable_delay_us)
> > -               usleep_range(clk->enable_delay_us, clk->enable_delay_us);
> > +               usleep_range(clk->enable_delay_us, clk->enable_delay_us*2);
> 
> Please add space around that multiply.
>
I can do that but it does not seem common and also checkpatch
did not complain about this - now a simple grep -re "\*10" on the
kernel shows that it seems more common not to use spaces around *
that to use them. Greping specifically for cases using usleep_range()
(not that many) it seems more or less evenly devided between space
and no space - so the concern is overlooking that factor 2 ?

thx!
hofrat