From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>,
Bengt Jonsson <bengt.g.jonsson@stericsson.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH 2/3] regulator: ab8500-ext: Remove *rdev from struct ab8500_ext_regulator_info
Date: Fri, 12 Apr 2019 22:06:57 +0800 [thread overview]
Message-ID: <20190412140658.11754-2-axel.lin@ingics.com> (raw)
In-Reply-To: <20190412140658.11754-1-axel.lin@ingics.com>
Current code is using devm_regulator_register() so we don't need to save
*rdev for clean up, use a local variable instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/ab8500-ext.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c
index 2268c934d6be..8e5365869c82 100644
--- a/drivers/regulator/ab8500-ext.c
+++ b/drivers/regulator/ab8500-ext.c
@@ -479,7 +479,6 @@ static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
* struct ab8500_ext_regulator_info - ab8500 regulator information
* @dev: device pointer
* @desc: regulator description
- * @rdev: regulator device
* @cfg: regulator configuration (extension of regulator FW configuration)
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
@@ -495,7 +494,6 @@ static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
struct ab8500_ext_regulator_info {
struct device *dev;
struct regulator_desc desc;
- struct regulator_dev *rdev;
struct ab8500_ext_regulator_cfg *cfg;
u8 update_bank;
u8 update_reg;
@@ -530,7 +528,7 @@ static int ab8500_ext_regulator_enable(struct regulator_dev *rdev)
info->update_bank, info->update_reg,
info->update_mask, regval);
if (ret < 0) {
- dev_err(rdev_get_dev(info->rdev),
+ dev_err(rdev_get_dev(rdev),
"couldn't set enable bits for regulator\n");
return ret;
}
@@ -566,7 +564,7 @@ static int ab8500_ext_regulator_disable(struct regulator_dev *rdev)
info->update_bank, info->update_reg,
info->update_mask, regval);
if (ret < 0) {
- dev_err(rdev_get_dev(info->rdev),
+ dev_err(rdev_get_dev(rdev),
"couldn't set disable bits for regulator\n");
return ret;
}
@@ -797,6 +795,7 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data;
struct device_node *np = pdev->dev.of_node;
struct regulator_config config = { };
+ struct regulator_dev *rdev;
int i, err;
if (np) {
@@ -850,17 +849,15 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
&pdata->ext_regulator[i];
/* register regulator with framework */
- info->rdev = devm_regulator_register(&pdev->dev, &info->desc,
- &config);
- if (IS_ERR(info->rdev)) {
- err = PTR_ERR(info->rdev);
+ rdev = devm_regulator_register(&pdev->dev, &info->desc,
+ &config);
+ if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
- return err;
+ return PTR_ERR(rdev);
}
- dev_dbg(rdev_get_dev(info->rdev),
- "%s-probed\n", info->desc.name);
+ dev_dbg(&pdev->dev, "%s-probed\n", info->desc.name);
}
return 0;
--
2.17.1
next prev parent reply other threads:[~2019-04-12 14:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-12 14:06 [PATCH 1/3] regulator: ab8500-ext: Constify ab8500_ext_regulator_ops Axel Lin
2019-04-12 14:06 ` Axel Lin [this message]
2019-04-15 8:53 ` Applied "regulator: ab8500-ext: Remove *rdev from struct ab8500_ext_regulator_info" to the regulator tree Mark Brown
2019-04-12 14:06 ` [PATCH 3/3] regulator: ab8500-ext: Convert to use simplified DT parsing Axel Lin
2019-04-15 8:53 ` Applied "regulator: ab8500-ext: Convert to use simplified DT parsing" to the regulator tree Mark Brown
2019-04-15 8:53 ` Applied "regulator: ab8500-ext: Constify ab8500_ext_regulator_ops" " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190412140658.11754-2-axel.lin@ingics.com \
--to=axel.lin@ingics.com \
--cc=bengt.g.jonsson@stericsson.com \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®