From: Christina Quast <cquast@hanoverdisplays.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Christina Quast <cquast@hanoverdisplays.com>,
Benoit Cousson <bcousson@baylibre.com>,
Mark Jackson <mpfj@newflow.co.uk>,
Tony Lindgren <tony@atomide.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 01/17] ARM: dts: am335x: igep0033: Replaced register offsets with defines
Date: Fri, 12 Apr 2019 18:26:11 +0200 [thread overview]
Message-ID: <20190412162627.24518-2-cquast@hanoverdisplays.com> (raw)
In-Reply-To: <20190412162627.24518-1-cquast@hanoverdisplays.com>
The defines are taken from dt-bindings/pinctrl/am33xx.h
Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
---
arch/arm/boot/dts/am335x-igep0033.dtsi | 40 +++++++++++++-------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 55b4c94cfafb..37008ec4fc89 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -57,41 +57,41 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
>;
};
nandflash_pins: pinmux_nandflash_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */
>;
};
};
--
2.20.1
next prev parent reply other threads:[~2019-04-12 16:27 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-12 16:26 [PATCH 00/17] ARM: dts: am335x: Replace numeric pinmux address w. macro for remaining boards Christina Quast
2019-04-12 16:26 ` Christina Quast [this message]
2019-04-12 16:26 ` [PATCH 02/17] ARM: dts: am335x: lxm: Replaced register offsets with defines Christina Quast
2019-04-12 16:26 ` [PATCH 03/17] ARM: dts: am335x: moxa-uc-2100-common: " Christina Quast
2019-04-12 16:26 ` [PATCH 04/17] ARM: dts: am335x: moxa-uc-2101: " Christina Quast
2019-04-12 16:26 ` [PATCH 05/17] ARM: dts: am335x: moxa-uc-8100-me-t: " Christina Quast
2019-04-12 16:26 ` [PATCH 06/17] ARM: dts: am335x: nano: " Christina Quast
2019-04-12 16:26 ` [PATCH 07/17] ARM: dts: am335x: osd3358-sm-red: " Christina Quast
2019-04-12 16:26 ` [PATCH 08/17] ARM: dts: am335x: osd335x-common: " Christina Quast
2019-04-12 16:26 ` [PATCH 09/17] ARM: dts: am335x: pcm-953: " Christina Quast
2019-04-12 16:26 ` [PATCH 10/17] ARM: dts: am335x: pdu001: " Christina Quast
2019-04-12 16:26 ` [PATCH 11/17] ARM: dts: am335x: pepper: " Christina Quast
2019-04-12 16:26 ` [PATCH 12/17] ARM: dts: am335x: phycore-som: " Christina Quast
2019-04-12 16:26 ` [PATCH 13/17] ARM: dts: am335x: sancloud-bbe: " Christina Quast
2019-04-12 16:26 ` [PATCH 14/17] ARM: dts: am335x: sbc-t335: " Christina Quast
2019-04-12 16:26 ` [PATCH 15/17] ARM: dts: am335x: shc: " Christina Quast
2019-04-12 16:26 ` [PATCH 16/17] ARM: dts: am335x: sl50: " Christina Quast
2019-04-12 16:26 ` [PATCH 17/17] ARM: dts: am335x: wega: " Christina Quast
2019-04-15 15:27 ` [PATCH 00/17] ARM: dts: am335x: Replace numeric pinmux address w. macro for remaining boards Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190412162627.24518-2-cquast@hanoverdisplays.com \
--to=cquast@hanoverdisplays.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mpfj@newflow.co.uk \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®