From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Lukasz Majewski <l.majewski@samsung.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH 2/2] regulator: max8998: Factor out struct voltage_map_desc
Date: Sun, 14 Apr 2019 20:48:18 +0800 [thread overview]
Message-ID: <20190414124818.28161-2-axel.lin@ingics.com> (raw)
In-Reply-To: <20190414124818.28161-1-axel.lin@ingics.com>
The struct voltage_map_desc is used for storing min/max/step fileds, and
then setup the min_uV, uV_step and n_voltages fields for regulator_desc.
Introduce MAX8998_LINEAR_REG/MAX8998_OTHERS_REG macro to setup these filds
directly in regulator_desc to simplify the code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/max8998.c | 294 +++++++-----------------------------
1 file changed, 56 insertions(+), 238 deletions(-)
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 43b69ebd086b..60599c3bb845 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -33,72 +33,6 @@ struct max8998_data {
unsigned int buck2_idx;
};
-struct voltage_map_desc {
- int min;
- int max;
- int step;
-};
-
-/* Voltage maps in uV*/
-static const struct voltage_map_desc ldo23_voltage_map_desc = {
- .min = 800000, .step = 50000, .max = 1300000,
-};
-static const struct voltage_map_desc ldo456711_voltage_map_desc = {
- .min = 1600000, .step = 100000, .max = 3600000,
-};
-static const struct voltage_map_desc ldo8_voltage_map_desc = {
- .min = 3000000, .step = 100000, .max = 3600000,
-};
-static const struct voltage_map_desc ldo9_voltage_map_desc = {
- .min = 2800000, .step = 100000, .max = 3100000,
-};
-static const struct voltage_map_desc ldo10_voltage_map_desc = {
- .min = 950000, .step = 50000, .max = 1300000,
-};
-static const struct voltage_map_desc ldo1213_voltage_map_desc = {
- .min = 800000, .step = 100000, .max = 3300000,
-};
-static const struct voltage_map_desc ldo1415_voltage_map_desc = {
- .min = 1200000, .step = 100000, .max = 3300000,
-};
-static const struct voltage_map_desc ldo1617_voltage_map_desc = {
- .min = 1600000, .step = 100000, .max = 3600000,
-};
-static const struct voltage_map_desc buck12_voltage_map_desc = {
- .min = 750000, .step = 25000, .max = 1525000,
-};
-static const struct voltage_map_desc buck3_voltage_map_desc = {
- .min = 1600000, .step = 100000, .max = 3600000,
-};
-static const struct voltage_map_desc buck4_voltage_map_desc = {
- .min = 800000, .step = 100000, .max = 2300000,
-};
-
-static const struct voltage_map_desc *ldo_voltage_map[] = {
- NULL,
- NULL,
- &ldo23_voltage_map_desc, /* LDO2 */
- &ldo23_voltage_map_desc, /* LDO3 */
- &ldo456711_voltage_map_desc, /* LDO4 */
- &ldo456711_voltage_map_desc, /* LDO5 */
- &ldo456711_voltage_map_desc, /* LDO6 */
- &ldo456711_voltage_map_desc, /* LDO7 */
- &ldo8_voltage_map_desc, /* LDO8 */
- &ldo9_voltage_map_desc, /* LDO9 */
- &ldo10_voltage_map_desc, /* LDO10 */
- &ldo456711_voltage_map_desc, /* LDO11 */
- &ldo1213_voltage_map_desc, /* LDO12 */
- &ldo1213_voltage_map_desc, /* LDO13 */
- &ldo1415_voltage_map_desc, /* LDO14 */
- &ldo1415_voltage_map_desc, /* LDO15 */
- &ldo1617_voltage_map_desc, /* LDO16 */
- &ldo1617_voltage_map_desc, /* LDO17 */
- &buck12_voltage_map_desc, /* BUCK1 */
- &buck12_voltage_map_desc, /* BUCK2 */
- &buck3_voltage_map_desc, /* BUCK3 */
- &buck4_voltage_map_desc, /* BUCK4 */
-};
-
static int max8998_get_enable_register(struct regulator_dev *rdev,
int *reg, int *shift)
{
@@ -400,7 +334,6 @@ static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
{
struct max8998_data *max8998 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8998->iodev->i2c;
- const struct voltage_map_desc *desc;
int buck = rdev_get_id(rdev);
u8 val = 0;
int difference, ret;
@@ -408,8 +341,6 @@ static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
if (buck < MAX8998_BUCK1 || buck > MAX8998_BUCK4)
return -EINVAL;
- desc = ldo_voltage_map[buck];
-
/* Voltage stabilization */
ret = max8998_read_reg(i2c, MAX8998_REG_ONOFF4, &val);
if (ret)
@@ -420,7 +351,7 @@ static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
return 0;
- difference = (new_selector - old_selector) * desc->step / 1000;
+ difference = (new_selector - old_selector) * rdev->desc->uV_step / 1000;
if (difference > 0)
return DIV_ROUND_UP(difference, (val & 0x0f) + 1);
@@ -454,158 +385,53 @@ static const struct regulator_ops max8998_others_ops = {
.disable = max8998_ldo_disable,
};
-static struct regulator_desc regulators[] = {
- {
- .name = "LDO2",
- .id = MAX8998_LDO2,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO3",
- .id = MAX8998_LDO3,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO4",
- .id = MAX8998_LDO4,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO5",
- .id = MAX8998_LDO5,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO6",
- .id = MAX8998_LDO6,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO7",
- .id = MAX8998_LDO7,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO8",
- .id = MAX8998_LDO8,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO9",
- .id = MAX8998_LDO9,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO10",
- .id = MAX8998_LDO10,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO11",
- .id = MAX8998_LDO11,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO12",
- .id = MAX8998_LDO12,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO13",
- .id = MAX8998_LDO13,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO14",
- .id = MAX8998_LDO14,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO15",
- .id = MAX8998_LDO15,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO16",
- .id = MAX8998_LDO16,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO17",
- .id = MAX8998_LDO17,
- .ops = &max8998_ldo_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "BUCK1",
- .id = MAX8998_BUCK1,
- .ops = &max8998_buck_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "BUCK2",
- .id = MAX8998_BUCK2,
- .ops = &max8998_buck_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "BUCK3",
- .id = MAX8998_BUCK3,
- .ops = &max8998_buck_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "BUCK4",
- .id = MAX8998_BUCK4,
- .ops = &max8998_buck_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "EN32KHz-AP",
- .id = MAX8998_EN32KHZ_AP,
- .ops = &max8998_others_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "EN32KHz-CP",
- .id = MAX8998_EN32KHZ_CP,
- .ops = &max8998_others_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "ENVICHG",
- .id = MAX8998_ENVICHG,
- .ops = &max8998_others_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "ESAFEOUT1",
- .id = MAX8998_ESAFEOUT1,
- .ops = &max8998_others_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- }, {
- .name = "ESAFEOUT2",
- .id = MAX8998_ESAFEOUT2,
- .ops = &max8998_others_ops,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
+#define MAX8998_LINEAR_REG(_name, _ops, _min, _step, _max) \
+ { \
+ .name = #_name, \
+ .id = MAX8998_##_name, \
+ .ops = _ops, \
+ .min_uV = (_min), \
+ .uV_step = (_step), \
+ .n_voltages = ((_max) - (_min)) / (_step) + 1, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
}
+
+#define MAX8998_OTHERS_REG(_name, _id) \
+ { \
+ .name = #_name, \
+ .id = _id, \
+ .ops = &max8998_others_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }
+
+static const struct regulator_desc regulators[] = {
+ MAX8998_LINEAR_REG(LDO2, &max8998_ldo_ops, 800000, 50000, 1300000),
+ MAX8998_LINEAR_REG(LDO3, &max8998_ldo_ops, 800000, 50000, 1300000),
+ MAX8998_LINEAR_REG(LDO4, &max8998_ldo_ops, 1600000, 100000, 3600000),
+ MAX8998_LINEAR_REG(LDO5, &max8998_ldo_ops, 1600000, 100000, 3600000),
+ MAX8998_LINEAR_REG(LDO6, &max8998_ldo_ops, 1600000, 100000, 3600000),
+ MAX8998_LINEAR_REG(LDO7, &max8998_ldo_ops, 1600000, 100000, 3600000),
+ MAX8998_LINEAR_REG(LDO8, &max8998_ldo_ops, 3000000, 100000, 3600000),
+ MAX8998_LINEAR_REG(LDO9, &max8998_ldo_ops, 2800000, 100000, 3100000),
+ MAX8998_LINEAR_REG(LDO10, &max8998_ldo_ops, 950000, 50000, 1300000),
+ MAX8998_LINEAR_REG(LDO11, &max8998_ldo_ops, 1600000, 100000, 3600000),
+ MAX8998_LINEAR_REG(LDO12, &max8998_ldo_ops, 800000, 100000, 3300000),
+ MAX8998_LINEAR_REG(LDO13, &max8998_ldo_ops, 800000, 100000, 3300000),
+ MAX8998_LINEAR_REG(LDO14, &max8998_ldo_ops, 1200000, 100000, 3300000),
+ MAX8998_LINEAR_REG(LDO15, &max8998_ldo_ops, 1200000, 100000, 3300000),
+ MAX8998_LINEAR_REG(LDO16, &max8998_ldo_ops, 1600000, 100000, 3600000),
+ MAX8998_LINEAR_REG(LDO17, &max8998_ldo_ops, 1600000, 100000, 3600000),
+ MAX8998_LINEAR_REG(BUCK1, &max8998_buck_ops, 750000, 25000, 1525000),
+ MAX8998_LINEAR_REG(BUCK2, &max8998_buck_ops, 750000, 25000, 1525000),
+ MAX8998_LINEAR_REG(BUCK3, &max8998_buck_ops, 1600000, 100000, 3600000),
+ MAX8998_LINEAR_REG(BUCK4, &max8998_buck_ops, 800000, 100000, 2300000),
+ MAX8998_OTHERS_REG(EN32KHz-AP, MAX8998_EN32KHZ_AP),
+ MAX8998_OTHERS_REG(EN32KHz-CP, MAX8998_EN32KHZ_CP),
+ MAX8998_OTHERS_REG(ENVICHG, MAX8998_ENVICHG),
+ MAX8998_OTHERS_REG(ESAFEOUT1, MAX8998_ESAFEOUT1),
+ MAX8998_OTHERS_REG(ESAFEOUT2, MAX8998_ESAFEOUT2),
};
static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev,
@@ -796,9 +622,11 @@ static int max8998_pmic_probe(struct platform_device *pdev)
/* Set predefined values for BUCK1 registers */
for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) {
+ int index = MAX8998_BUCK1 - MAX8998_LDO2;
+
i = 0;
- while (buck12_voltage_map_desc.min +
- buck12_voltage_map_desc.step*i
+ while (regulators[index].min_uV +
+ regulators[index].uV_step * i
< pdata->buck1_voltage[v])
i++;
@@ -824,9 +652,11 @@ static int max8998_pmic_probe(struct platform_device *pdev)
/* Set predefined values for BUCK2 registers */
for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) {
+ int index = MAX8998_BUCK2 - MAX8998_LDO2;
+
i = 0;
- while (buck12_voltage_map_desc.min +
- buck12_voltage_map_desc.step*i
+ while (regulators[index].min_uV +
+ regulators[index].uV_step * i
< pdata->buck2_voltage[v])
i++;
@@ -839,18 +669,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
}
for (i = 0; i < pdata->num_regulators; i++) {
- const struct voltage_map_desc *desc;
- int id = pdata->regulators[i].id;
- int index = id - MAX8998_LDO2;
-
- desc = ldo_voltage_map[id];
- if (desc && regulators[index].ops != &max8998_others_ops) {
- int count = (desc->max - desc->min) / desc->step + 1;
-
- regulators[index].n_voltages = count;
- regulators[index].min_uV = desc->min;
- regulators[index].uV_step = desc->step;
- }
+ int index = pdata->regulators[i].id - MAX8998_LDO2;
config.dev = max8998->dev;
config.of_node = pdata->regulators[i].reg_node;
@@ -867,7 +686,6 @@ static int max8998_pmic_probe(struct platform_device *pdev)
}
}
-
return 0;
}
--
2.17.1
next prev parent reply other threads:[~2019-04-14 12:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-14 12:48 [PATCH 1/2] regulator: max8998: Constify regulator_ops Axel Lin
2019-04-14 12:48 ` Axel Lin [this message]
2019-04-15 8:53 ` Applied "regulator: max8998: Factor out struct voltage_map_desc" to the regulator tree Mark Brown
2019-04-15 8:53 ` Applied "regulator: max8998: Constify regulator_ops" " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190414124818.28161-2-axel.lin@ingics.com \
--to=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=l.majewski@samsung.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®