From: "Tamás Szűcs" <tszucs@protonmail.ch>
To: Amitkumar Karwar <amitkarwar@gmail.com>,
Nishant Sarmukadam <nishants@marvell.com>,
Ganapathi Bhat <gbhat@marvell.com>,
Xinming Hu <huxinming820@gmail.com>,
Kalle Valo <kvalo@codeaurora.org>,
"David S . Miller" <davem@davemloft.net>,
linux-wireless@vger.kernel.org (open list:MARVELL MWIFIEX
WIRELESS DRIVER),
netdev@vger.kernel.org (open list:NETWORKING DRIVERS),
linux-kernel@vger.kernel.org (open list)
Cc: "Cathy Luo" <cluo@marvell.com>,
"Zhiyuan Yang" <yangzy@marvell.com>,
"James Cao" <jcao@marvell.com>,
"Rakesh Parmar" <rakeshp@marvell.com>,
"Hemantkumar Suthar" <shemant@marvell.com>,
"Tamás Szűcs" <tszucs@protonmail.ch>
Subject: [PATCH 1/1] mwifiex: add support for SD8987 chipset
Date: Sun, 14 Apr 2019 20:36:41 +0200 [thread overview]
Message-ID: <20190414183641.7539-2-tszucs@protonmail.ch> (raw)
In-Reply-To: <20190414183641.7539-1-tszucs@protonmail.ch>
This patch adds support for Marvell 88W8987 chipset with SDIO interface.
Register offsets and supported feature flags are updated. The corresponding
firmware image file shall be "mrvl/sd8987_uapsta.bin".
Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
---
drivers/net/wireless/marvell/mwifiex/Kconfig | 4 +-
drivers/net/wireless/marvell/mwifiex/sdio.c | 5 ++
drivers/net/wireless/marvell/mwifiex/sdio.h | 69 ++++++++++++++++++++++++++++
3 files changed, 76 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig
index 524fd565cb2a..572d187a99f4 100644
--- a/drivers/net/wireless/marvell/mwifiex/Kconfig
+++ b/drivers/net/wireless/marvell/mwifiex/Kconfig
@@ -9,13 +9,13 @@ config MWIFIEX
mwifiex.
config MWIFIEX_SDIO
- tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997"
+ tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997"
depends on MWIFIEX && MMC
select FW_LOADER
select WANT_DEV_COREDUMP
---help---
This adds support for wireless adapters based on Marvell
- 8786/8787/8797/8887/8897/8997 chipsets with SDIO interface.
+ 8786/8787/8797/8887/8897/8977/8987/8997 chipsets with SDIO interface.
If you choose to build it as a module, it will be called
mwifiex_sdio.
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index a85648342d15..32bf2baeba9a 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -491,6 +491,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
#define SDIO_DEVICE_ID_MARVELL_8801 (0x9139)
/* Device ID for SD8977 */
#define SDIO_DEVICE_ID_MARVELL_8977 (0x9145)
+/* Device ID for SD8987 */
+#define SDIO_DEVICE_ID_MARVELL_8987 (0x9149)
/* Device ID for SD8997 */
#define SDIO_DEVICE_ID_MARVELL_8997 (0x9141)
@@ -511,6 +513,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977),
.driver_data = (unsigned long)&mwifiex_sdio_sd8977},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8987),
+ .driver_data = (unsigned long)&mwifiex_sdio_sd8987},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
.driver_data = (unsigned long)&mwifiex_sdio_sd8997},
{},
@@ -2731,4 +2735,5 @@ MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8987_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
index 912de2cde8d9..f672bdf52cc1 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.h
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
@@ -37,6 +37,7 @@
#define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
#define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
#define SD8977_DEFAULT_FW_NAME "mrvl/sd8977_uapsta.bin"
+#define SD8987_DEFAULT_FW_NAME "mrvl/sd8987_uapsta.bin"
#define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
#define BLOCK_MODE 1
@@ -526,6 +527,58 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = {
0x68, 0x69, 0x6a},
};
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8987 = {
+ .start_rd_port = 0,
+ .start_wr_port = 0,
+ .base_0_reg = 0xF8,
+ .base_1_reg = 0xF9,
+ .poll_reg = 0x5C,
+ .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+ CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+ .host_int_rsr_reg = 0x4,
+ .host_int_status_reg = 0x0C,
+ .host_int_mask_reg = 0x08,
+ .status_reg_0 = 0xE8,
+ .status_reg_1 = 0xE9,
+ .sdio_int_mask = 0xff,
+ .data_port_mask = 0xffffffff,
+ .io_port_0_reg = 0xE4,
+ .io_port_1_reg = 0xE5,
+ .io_port_2_reg = 0xE6,
+ .max_mp_regs = 196,
+ .rd_bitmap_l = 0x10,
+ .rd_bitmap_u = 0x11,
+ .rd_bitmap_1l = 0x12,
+ .rd_bitmap_1u = 0x13,
+ .wr_bitmap_l = 0x14,
+ .wr_bitmap_u = 0x15,
+ .wr_bitmap_1l = 0x16,
+ .wr_bitmap_1u = 0x17,
+ .rd_len_p0_l = 0x18,
+ .rd_len_p0_u = 0x19,
+ .card_misc_cfg_reg = 0xd8,
+ .card_cfg_2_1_reg = 0xd9,
+ .cmd_rd_len_0 = 0xc0,
+ .cmd_rd_len_1 = 0xc1,
+ .cmd_rd_len_2 = 0xc2,
+ .cmd_rd_len_3 = 0xc3,
+ .cmd_cfg_0 = 0xc4,
+ .cmd_cfg_1 = 0xc5,
+ .cmd_cfg_2 = 0xc6,
+ .cmd_cfg_3 = 0xc7,
+ .fw_dump_host_ready = 0xcc,
+ .fw_dump_ctrl = 0xf9,
+ .fw_dump_start = 0xf1,
+ .fw_dump_end = 0xf8,
+ .func1_dump_reg_start = 0x10,
+ .func1_dump_reg_end = 0x17,
+ .func1_scratch_reg = 0xE8,
+ .func1_spec_reg_num = 13,
+ .func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D, 0x60,
+ 0x61, 0x62, 0x64, 0x65, 0x66,
+ 0x68, 0x69, 0x6a},
+};
+
static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
.firmware = SD8786_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd87xx,
@@ -633,6 +686,22 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
.can_ext_scan = true,
};
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8987 = {
+ .firmware = SD8987_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_sd8987,
+ .max_ports = 32,
+ .mp_agg_pkt_limit = 16,
+ .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+ .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+ .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+ .supports_sdio_new_mode = true,
+ .has_control_mask = false,
+ .can_dump_fw = true,
+ .fw_dump_enh = true,
+ .can_auto_tdls = true,
+ .can_ext_scan = true,
+};
+
static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
.firmware = SD8801_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd87xx,
--
2.11.0
next prev parent reply other threads:[~2019-04-14 18:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-14 18:36 [PATCH 0/1] " Tamás Szűcs
2019-04-14 18:36 ` Tamás Szűcs [this message]
2019-04-25 16:54 ` [PATCH 1/1] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190414183641.7539-2-tszucs@protonmail.ch \
--to=tszucs@protonmail.ch \
--cc=amitkarwar@gmail.com \
--cc=cluo@marvell.com \
--cc=davem@davemloft.net \
--cc=gbhat@marvell.com \
--cc=huxinming820@gmail.com \
--cc=jcao@marvell.com \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nishants@marvell.com \
--cc=rakeshp@marvell.com \
--cc=shemant@marvell.com \
--cc=yangzy@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®