From: andy.tang@nxp.com
To: mturquette@baylibre.com
Cc: sboyd@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Yuantian Tang <andy.tang@nxp.com>
Subject: [PATCH] clk: qoriq: Add ls1028a clock configuration
Date: Wed, 24 Apr 2019 09:19:12 +0800 [thread overview]
Message-ID: <20190424011912.2179-1-andy.tang@nxp.com> (raw)
From: Yuantian Tang <andy.tang@nxp.com>
Enable clock driver by adding clock configuration for ls1028a chip.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
drivers/clk/clk-qoriq.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 1212a9b..8b0cb0b 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -245,6 +245,58 @@ static u32 cg_in(struct clockgen *cg, u32 __iomem *reg)
},
};
+static const struct clockgen_muxinfo ls1028a_hwa1 = {
+ {
+ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo ls1028a_hwa2 = {
+ {
+ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo ls1028a_hwa3 = {
+ {
+ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ },
+};
+
+static const struct clockgen_muxinfo ls1028a_hwa4 = {
+ {
+ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+ { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+ {},
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+ },
+};
+
static const struct clockgen_muxinfo ls1043a_hwa1 = {
{
{},
@@ -508,6 +560,21 @@ static void __init t4240_init_periph(struct clockgen *cg)
.pll_mask = 0x03,
},
{
+ .compat = "fsl,ls1028a-clockgen",
+ .cmux_groups = {
+ &clockgen2_cmux_cga12
+ },
+ .hwaccel = {
+ &ls1028a_hwa1, &ls1028a_hwa2,
+ &ls1028a_hwa3, &ls1028a_hwa4
+ },
+ .cmux_to_group = {
+ 0, 0, 0, 0, -1
+ },
+ .pll_mask = 0x07,
+ .flags = CG_VER3 | CG_LITTLE_ENDIAN,
+ },
+ {
.compat = "fsl,ls1043a-clockgen",
.init_periph = t2080_init_periph,
.cmux_groups = {
@@ -1423,6 +1490,7 @@ static void __init clockgen_init(struct device_node *np)
CLK_OF_DECLARE(qoriq_clockgen_b4860, "fsl,b4860-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1028a, "fsl,ls1028a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1088a, "fsl,ls1088a-clockgen", clockgen_init);
--
1.7.1
next reply other threads:[~2019-04-24 1:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-24 1:19 andy.tang [this message]
2019-04-25 18:37 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190424011912.2179-1-andy.tang@nxp.com \
--to=andy.tang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®