[PATCH] ASoC: da7219: Use clk_round_rate to handle enabled bclk/wclk case

[Adam Thomson <Adam.Thomson.Opensource@diasemi.com>]

For some platforms where DA7219 is the DAI clock master, BCLK/WCLK
will be set and enabled prior to the codec's hw_params() function
being called. It is possible the platform requires a different
BCLK/WCLK configuration than would be chosen by hw_params(), for
example S16_LE format needed with a 64-bit frame to satisfy certain
devices using the clocks.

To handle those kinds of scenarios, the use of clk_round_rate() is
now employed as part of hw_params(). If BCLK/WCLk are already
enabled then this function will just return the currently set
rates, so the subsequent calls to clk_set_rate() will succeed and
nothing changes with regards to clocking. In addition the specific
recalc_rate() implementations needed updating to always give back
a real value, as those functions are called as part of the clk
init code and a real value is needed for the clk_round_rate() calls
to work as expected.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
---
 sound/soc/codecs/da7219.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c
index 5f5fa34..72268f5 100644
--- a/sound/soc/codecs/da7219.c
+++ b/sound/soc/codecs/da7219.c
@@ -1593,6 +1593,13 @@ static int da7219_hw_params(struct snd_pcm_substream *substream,
 
 	sr = params_rate(params);
 	if (da7219->master && wclk) {
+		/*
+		 * Rounding the rate here avoids failure trying to set a new
+		 * rate on an already enabled wclk. In that instance this will
+		 * just set the same rate as is currently in use, and so should
+		 * continue without problem.
+		 */
+		sr = clk_round_rate(wclk, sr);
 		ret = clk_set_rate(wclk, sr);
 		if (ret) {
 			dev_err(component->dev,
@@ -1621,6 +1628,14 @@ static int da7219_hw_params(struct snd_pcm_substream *substream,
 
 		if (bclk) {
 			bclk_rate = frame_size * sr;
+			/*
+			 * Rounding the rate here avoids failure trying to set a
+			 * new rate on an already enabled bclk. In that
+			 * instance this will just set the same rate as is
+			 * currently in use, and so should continue without
+			 * problem.
+			 */
+			bclk_rate = clk_round_rate(bclk, bclk_rate);
 			ret = clk_set_rate(bclk, bclk_rate);
 			if (ret) {
 				dev_err(component->dev,
@@ -1927,9 +1942,6 @@ static unsigned long da7219_wclk_recalc_rate(struct clk_hw *hw,
 	struct snd_soc_component *component = da7219->component;
 	u8 fs = snd_soc_component_read32(component, DA7219_SR);
 
-	if (!da7219->master)
-		return 0;
-
 	switch (fs & DA7219_SR_MASK) {
 	case DA7219_SR_8000:
 		return 8000;
@@ -2016,9 +2028,6 @@ static unsigned long da7219_bclk_recalc_rate(struct clk_hw *hw,
 	u8 bclks_per_wclk = snd_soc_component_read32(component,
 						     DA7219_DAI_CLK_MODE);
 
-	if (!da7219->master)
-		return 0;
-
 	switch (bclks_per_wclk & DA7219_DAI_BCLKS_PER_WCLK_MASK) {
 	case DA7219_DAI_BCLKS_PER_WCLK_32:
 		return parent_rate * 32;
-- 
1.9.1