From: "Gaël PORTAY" <gael.portay@collabora.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Rob Herring <robh+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Lin Huang <hl@rock-chips.com>,
Brian Norris <briannorris@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Klaus Goger <klaus.goger@theobroma-systems.com>,
Derek Basehore <dbasehore@chromium.org>,
Randy Li <ayaka@soulik.info>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org
Cc: "Mark Rutland" <mark.rutland@arm.com>,
kernel@collabora.com, "Gaël PORTAY" <gael.portay@collabora.com>
Subject: [PATCH v5 6/6] dt-bindings: devfreq: rk3399_dmc: Remove references of unexistant defines
Date: Thu, 2 May 2019 13:58:20 -0400 [thread overview]
Message-ID: <20190502175820.25382-7-gael.portay@collabora.com> (raw)
In-Reply-To: <20190502175820.25382-1-gael.portay@collabora.com>
Those DDR related defines do not exist. Replace their references with
their numerical constant.
Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
---
Changes in v5: New
.../bindings/devfreq/rk3399_dmc.txt | 73 +++++++++----------
1 file changed, 34 insertions(+), 39 deletions(-)
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index 951789c0cdd6..3ea856970e46 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -77,24 +77,23 @@ Following properties relate to DDR timing:
- rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines
the DRAM side driver strength in ohms. Default
- value is DDR3_DS_40ohm.
+ value is 40.
- rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines
the DRAM side ODT strength in ohms. Default value
- is DDR3_ODT_120ohm.
+ is 120.
- rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines
the phy side CA line (incluing command line,
address line and clock line) driver strength.
- Default value is PHY_DRV_ODT_40.
+ Default value is 40.
- rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines
the PHY side DQ line (including DQS/DQ/DM line)
- driver strength. Default value is PHY_DRV_ODT_40.
+ driver strength. Default value is 40.
- rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines
- the PHY side ODT strength. Default value is
- PHY_DRV_ODT_240.
+ the PHY side ODT strength. Default value is 240.
- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
then ODT disable frequency in MHz (Mega Hz).
@@ -104,25 +103,23 @@ Following properties relate to DDR timing:
- rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines
the DRAM side driver strength in ohms. Default
- value is LP3_DS_34ohm.
+ value is 34.
- rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines
the DRAM side ODT strength in ohms. Default value
- is LP3_ODT_240ohm.
+ is 240.
- rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines
the PHY side CA line (including command line,
address line and clock line) driver strength.
- Default value is PHY_DRV_ODT_40.
+ Default value is 40.
- rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines
the PHY side DQ line (including DQS/DQ/DM line)
- driver strength. Default value is
- PHY_DRV_ODT_40.
+ driver strength. Default value is 40.
- rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define
- the phy side odt strength, default value is
- PHY_DRV_ODT_240.
+ the phy side odt strength, default value is 240.
- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
defines the ODT disable frequency in
@@ -132,32 +129,30 @@ Following properties relate to DDR timing:
- rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines
the DRAM side driver strength in ohms. Default
- value is LP4_PDDS_60ohm.
+ value is 60.
- rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines
the DRAM side ODT on DQS/DQ line strength in ohms.
- Default value is LP4_DQ_ODT_40ohm.
+ Default value is 40.
- rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines
the DRAM side ODT on CA line strength in ohms.
- Default value is LP4_CA_ODT_40ohm.
+ Default value is 40.
- rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines
the PHY side CA line (including command address
- line) driver strength. Default value is
- PHY_DRV_ODT_40.
+ line) driver strength. Default value is 40.
- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
the PHY side clock line and CS line driver
- strength. Default value is PHY_DRV_ODT_80.
+ strength. Default value is 80.
- rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines
the PHY side DQ line (including DQS/DQ/DM line)
- driver strength. Default value is PHY_DRV_ODT_80.
+ driver strength. Default value is 80.
- rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines
- the PHY side ODT strength. Default value is
- PHY_DRV_ODT_60.
+ the PHY side ODT strength. Default value is 60.
Example:
dmc_opp_table: dmc_opp_table {
@@ -193,23 +188,23 @@ Example:
rockchip,phy_dll_dis_freq = <125>;
rockchip,auto_pd_dis_freq = <666>;
rockchip,ddr3_odt_dis_freq = <333>;
- rockchip,ddr3_drv = <DDR3_DS_40ohm>;
- rockchip,ddr3_odt = <DDR3_ODT_120ohm>;
- rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
- rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
- rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>;
+ rockchip,ddr3_drv = <40>;
+ rockchip,ddr3_odt = <120>;
+ rockchip,phy_ddr3_ca_drv = <40>;
+ rockchip,phy_ddr3_dq_drv = <40>;
+ rockchip,phy_ddr3_odt = <240>;
rockchip,lpddr3_odt_dis_freq = <333>;
- rockchip,lpddr3_drv = <LP3_DS_34ohm>;
- rockchip,lpddr3_odt = <LP3_ODT_240ohm>;
- rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
- rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
- rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>;
+ rockchip,lpddr3_drv = <34>;
+ rockchip,lpddr3_odt = <240>;
+ rockchip,phy_lpddr3_ca_drv = <40>;
+ rockchip,phy_lpddr3_dq_drv = <40>;
+ rockchip,phy_lpddr3_odt = <240>;
rockchip,lpddr4_odt_dis_freq = <333>;
- rockchip,lpddr4_drv = <LP4_PDDS_60ohm>;
- rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
- rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
- rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
- rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
- rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
- rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;
+ rockchip,lpddr4_drv = <60>;
+ rockchip,lpddr4_dq_odt = <40>;
+ rockchip,lpddr4_ca_odt = <40>;
+ rockchip,phy_lpddr4_ca_drv = <40>;
+ rockchip,phy_lpddr4_ck_cs_drv = <80>;
+ rockchip,phy_lpddr4_dq_drv = <80>;
+ rockchip,phy_lpddr4_odt = <60>;
};
--
2.21.0
next prev parent reply other threads:[~2019-05-02 17:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-02 17:58 [PATCH v5 0/5] Add support for drm/rockchip to dynamically control the DDR frequency Gaël PORTAY
2019-05-02 17:58 ` [PATCH v5 1/6] devfreq: rockchip-dfi: Move GRF definitions to a common place Gaël PORTAY
2019-05-03 0:36 ` Chanwoo Choi
2019-05-02 17:58 ` [PATCH v5 2/6] dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle Gaël PORTAY
2019-05-02 17:58 ` [PATCH v5 3/6] devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A Gaël PORTAY
2019-05-03 0:38 ` Chanwoo Choi
2019-05-02 17:58 ` [PATCH v5 4/6] arm64: dts: rk3399: Add dfi and dmc nodes Gaël PORTAY
2019-05-02 17:58 ` [PATCH v5 5/6] arm64: dts: rockchip: Enable dmc and dfi nodes on gru Gaël PORTAY
2019-05-02 17:58 ` Gaël PORTAY [this message]
2019-05-07 17:07 ` [PATCH v5 6/6] dt-bindings: devfreq: rk3399_dmc: Remove references of unexistant defines Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190502175820.25382-7-gael.portay@collabora.com \
--to=gael.portay@collabora.com \
--cc=ayaka@soulik.info \
--cc=briannorris@chromium.org \
--cc=cw00.choi@samsung.com \
--cc=dbasehore@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=heiko@sntech.de \
--cc=hl@rock-chips.com \
--cc=kernel@collabora.com \
--cc=klaus.goger@theobroma-systems.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®