From: Mark Brown <broonie@kernel.org>
To: Axel Lin <axel.lin@ingics.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Pascal Paillet <p.paillet@st.com>
Subject: Applied "regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg" to the regulator tree
Date: Fri, 3 May 2019 07:18:48 +0100 (BST) [thread overview]
Message-ID: <20190503061848.504EB441D56@finisterre.ee.mobilebroadband> (raw)
In-Reply-To: <20190430111346.23427-1-axel.lin@ingics.com>
The patch
regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 7bcbdbe01fa82712f8fece2a07ea30758b76403d Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 30 Apr 2019 19:13:45 +0800
Subject: [PATCH] regulator: stm32-pwr: Remove unneeded *desc from struct
stm32_pwr_reg
Just use rdev->desc instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/stm32-pwr.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/stm32-pwr.c b/drivers/regulator/stm32-pwr.c
index 7b39a41530d4..8bd15e4d2cea 100644
--- a/drivers/regulator/stm32-pwr.c
+++ b/drivers/regulator/stm32-pwr.c
@@ -40,7 +40,6 @@ static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
struct stm32_pwr_reg {
void __iomem *base;
- const struct regulator_desc *desc;
u32 ready_mask;
};
@@ -61,7 +60,7 @@ static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev)
val = readl_relaxed(priv->base + REG_PWR_CR3);
- return (val & priv->desc->enable_mask);
+ return (val & rdev->desc->enable_mask);
}
static int stm32_pwr_reg_enable(struct regulator_dev *rdev)
@@ -71,7 +70,7 @@ static int stm32_pwr_reg_enable(struct regulator_dev *rdev)
u32 val;
val = readl_relaxed(priv->base + REG_PWR_CR3);
- val |= priv->desc->enable_mask;
+ val |= rdev->desc->enable_mask;
writel_relaxed(val, priv->base + REG_PWR_CR3);
/* use an arbitrary timeout of 20ms */
@@ -90,7 +89,7 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev)
u32 val;
val = readl_relaxed(priv->base + REG_PWR_CR3);
- val &= ~priv->desc->enable_mask;
+ val &= ~rdev->desc->enable_mask;
writel_relaxed(val, priv->base + REG_PWR_CR3);
/* use an arbitrary timeout of 20ms */
@@ -153,7 +152,6 @@ static int stm32_pwr_regulator_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
priv->base = base;
- priv->desc = &stm32_pwr_desc[i];
priv->ready_mask = ready_mask_table[i];
config.driver_data = priv;
--
2.20.1
next prev parent reply other threads:[~2019-05-03 6:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-30 11:13 [PATCH 1/2] regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg Axel Lin
2019-04-30 11:13 ` [PATCH 2/2] regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage Axel Lin
2019-05-03 6:18 ` Applied "regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage" to the regulator tree Mark Brown
2019-05-03 6:21 ` Mark Brown
2019-05-03 6:23 ` Mark Brown
2019-05-03 6:18 ` Mark Brown [this message]
2019-05-03 6:21 ` Applied "regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg" " Mark Brown
2019-05-03 6:23 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190503061848.504EB441D56@finisterre.ee.mobilebroadband \
--to=broonie@kernel.org \
--cc=axel.lin@ingics.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.paillet@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®