From: Mark Brown <broonie@kernel.org>
To: Axel Lin <axel.lin@ingics.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>
Subject: Applied "regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc" to the regulator tree
Date: Fri, 3 May 2019 07:18:49 +0100 (BST) [thread overview]
Message-ID: <20190503061849.659BD441D3C@finisterre.ee.mobilebroadband> (raw)
In-Reply-To: <20190502142233.24730-1-axel.lin@ingics.com>
The patch
regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 95602d7d77f502d656e648ab38f8e0586364e7dc Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Thu, 2 May 2019 22:22:32 +0800
Subject: [PATCH] regulator: ab3100: Constify regulator_ops and
ab3100_regulator_desc
These regulator_ops variables and ab3100_regulator_desc array never need
to be modified, make them const so compiler can put them to .rodata.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/ab3100.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index c92966a79a7e..edde907a7062 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -353,14 +353,14 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
return 0;
}
-static struct regulator_ops regulator_ops_fixed = {
+static const struct regulator_ops regulator_ops_fixed = {
.list_voltage = regulator_list_voltage_linear,
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
};
-static struct regulator_ops regulator_ops_variable = {
+static const struct regulator_ops regulator_ops_variable = {
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
@@ -369,7 +369,7 @@ static struct regulator_ops regulator_ops_variable = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops regulator_ops_variable_sleepable = {
+static const struct regulator_ops regulator_ops_variable_sleepable = {
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
@@ -385,14 +385,14 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
* is an on/off switch plain an simple. The external
* voltage is defined in the board set-up if any.
*/
-static struct regulator_ops regulator_ops_external = {
+static const struct regulator_ops regulator_ops_external = {
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
.get_voltage = ab3100_get_voltage_regulator_external,
};
-static struct regulator_desc
+static const struct regulator_desc
ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
{
.name = "LDO_A",
@@ -499,7 +499,7 @@ static int ab3100_regulator_register(struct platform_device *pdev,
struct device_node *np,
unsigned long id)
{
- struct regulator_desc *desc;
+ const struct regulator_desc *desc;
struct ab3100_regulator *reg;
struct regulator_dev *rdev;
struct regulator_config config = { };
@@ -688,7 +688,7 @@ static int ab3100_regulators_probe(struct platform_device *pdev)
/* Register the regulators */
for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
- struct regulator_desc *desc = &ab3100_regulator_desc[i];
+ const struct regulator_desc *desc = &ab3100_regulator_desc[i];
err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
desc->id);
--
2.20.1
next prev parent reply other threads:[~2019-05-03 6:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-02 14:22 [PATCH 1/2] regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc Axel Lin
2019-05-02 14:22 ` [PATCH 2/2] regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators Axel Lin
2019-05-03 6:18 ` Applied "regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators" to the regulator tree Mark Brown
2019-05-03 6:21 ` Mark Brown
2019-05-03 6:23 ` Mark Brown
2019-05-03 6:18 ` Mark Brown [this message]
2019-05-03 6:21 ` Applied "regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc" " Mark Brown
2019-05-03 6:23 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190503061849.659BD441D3C@finisterre.ee.mobilebroadband \
--to=broonie@kernel.org \
--cc=axel.lin@ingics.com \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®