Re: [PATCH 2/2] mmc: sdhci-milbeaut: add Milbeaut SD controller driver

[<orito.takao@socionext.com>]

Thank you for reviewing my patches.

> [...]
> 
> > +
> > +static void sdhci_milbeaut_power_off(struct sdhci_host *host)
> > +{
> > +       struct f_sdhost_priv *priv = sdhci_priv(host);
> > +
> > +       gpiod_set_value(priv->power_gpio, 0);
> > +       udelay(1000);
> > +}
> > +
> > +static void sdhci_milbeaut_power_on(struct sdhci_host *host)
> > +{
> > +       struct f_sdhost_priv *priv = sdhci_priv(host);
> > +
> > +       gpiod_set_value(priv->power_gpio, 1);
> > +}
> > +
> 
> As stated for the DT doc patch, please use a fixed GPIO regulator
> instead. In this way you will also get a the OCR mask based upon the
> GPIO regulator, which is parsed out by the mmc core when sdhci calls
> mmc_regulator_get_supply().

I see. I will update this part too at the view point of using regurator.

Thanks
Orito

> 
> Otherwise, this looks good to me.
> 
> [...]
> 
> Kind regards
> Uffe

-- 
Takao Orito <orito.takao@socionext.com>