mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org, Joseph Lo <josephl@nvidia.com>,
	Thierry Reding <treding@nvidia.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	linux-tegra@vger.kernel.org (open list:TEGRA ARCHITECTURE
	SUPPORT)
Subject: [PATCH 03/15] clocksource/drivers/tegra: Rework for compensation of suspend time
Date: Thu,  9 May 2019 13:10:36 +0200	[thread overview]
Message-ID: <20190509111048.11151-3-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20190509111048.11151-1-daniel.lezcano@linaro.org>

From: Joseph Lo <josephl@nvidia.com>

Since the clocksource framework has the support for suspend time
compensation. Re-work the driver to use that, so we can reduce the
duplicate code.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-tegra20.c | 63 +++++++++--------------------
 1 file changed, 20 insertions(+), 43 deletions(-)

diff --git a/drivers/clocksource/timer-tegra20.c b/drivers/clocksource/timer-tegra20.c
index fdb3d795a409..919b3568c495 100644
--- a/drivers/clocksource/timer-tegra20.c
+++ b/drivers/clocksource/timer-tegra20.c
@@ -60,9 +60,6 @@
 static u32 usec_config;
 static void __iomem *timer_reg_base;
 #ifdef CONFIG_ARM
-static void __iomem *rtc_base;
-static struct timespec64 persistent_ts;
-static u64 persistent_ms, last_persistent_ms;
 static struct delay_timer tegra_delay_timer;
 #endif
 
@@ -199,40 +196,30 @@ static unsigned long tegra_delay_timer_read_counter_long(void)
 	return readl(timer_reg_base + TIMERUS_CNTR_1US);
 }
 
+static struct timer_of suspend_rtc_to = {
+	.flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
+};
+
 /*
  * tegra_rtc_read - Reads the Tegra RTC registers
  * Care must be taken that this funciton is not called while the
  * tegra_rtc driver could be executing to avoid race conditions
  * on the RTC shadow register
  */
-static u64 tegra_rtc_read_ms(void)
+static u64 tegra_rtc_read_ms(struct clocksource *cs)
 {
-	u32 ms = readl(rtc_base + RTC_MILLISECONDS);
-	u32 s = readl(rtc_base + RTC_SHADOW_SECONDS);
+	u32 ms = readl(timer_of_base(&suspend_rtc_to) + RTC_MILLISECONDS);
+	u32 s = readl(timer_of_base(&suspend_rtc_to) + RTC_SHADOW_SECONDS);
 	return (u64)s * MSEC_PER_SEC + ms;
 }
 
-/*
- * tegra_read_persistent_clock64 -  Return time from a persistent clock.
- *
- * Reads the time from a source which isn't disabled during PM, the
- * 32k sync timer.  Convert the cycles elapsed since last read into
- * nsecs and adds to a monotonically increasing timespec64.
- * Care must be taken that this funciton is not called while the
- * tegra_rtc driver could be executing to avoid race conditions
- * on the RTC shadow register
- */
-static void tegra_read_persistent_clock64(struct timespec64 *ts)
-{
-	u64 delta;
-
-	last_persistent_ms = persistent_ms;
-	persistent_ms = tegra_rtc_read_ms();
-	delta = persistent_ms - last_persistent_ms;
-
-	timespec64_add_ns(&persistent_ts, delta * NSEC_PER_MSEC);
-	*ts = persistent_ts;
-}
+static struct clocksource suspend_rtc_clocksource = {
+	.name	= "tegra_suspend_timer",
+	.rating	= 200,
+	.read	= tegra_rtc_read_ms,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
+};
 #endif
 
 static int tegra_timer_common_init(struct device_node *np, struct timer_of *to)
@@ -385,25 +372,15 @@ static int __init tegra_init_timer(struct device_node *np)
 
 static int __init tegra20_init_rtc(struct device_node *np)
 {
-	struct clk *clk;
+	int ret;
 
-	rtc_base = of_iomap(np, 0);
-	if (!rtc_base) {
-		pr_err("Can't map RTC registers\n");
-		return -ENXIO;
-	}
+	ret = timer_of_init(np, &suspend_rtc_to);
+	if (ret)
+		return ret;
 
-	/*
-	 * rtc registers are used by read_persistent_clock, keep the rtc clock
-	 * enabled
-	 */
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk))
-		pr_warn("Unable to get rtc-tegra clock\n");
-	else
-		clk_prepare_enable(clk);
+	clocksource_register_hz(&suspend_rtc_clocksource, 1000);
 
-	return register_persistent_clock(tegra_read_persistent_clock64);
+	return 0;
 }
 TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
 #endif
-- 
2.17.1


  parent reply	other threads:[~2019-05-09 11:12 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-09 11:08 [GIT PULL] timer drivers for 5.2 Daniel Lezcano
2019-05-09 11:10 ` [PATCH 01/15] clocksource/drivers/sun4i: Add a compatible for suniv Daniel Lezcano
2019-05-09 11:10   ` [PATCH 02/15] clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 Daniel Lezcano
2019-06-18 12:07     ` Helmut Grohne
2019-05-09 11:10   ` Daniel Lezcano [this message]
2019-05-09 11:10   ` [PATCH 04/15] clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer Daniel Lezcano
2019-05-09 11:10   ` [PATCH 05/15] clocksource/drivers/timer-milbeaut: Add shutdown function Daniel Lezcano
2019-05-09 11:10   ` [PATCH 06/15] clocksource/drivers/timer-milbeaut: Cleanup common register accesses Daniel Lezcano
2019-05-09 11:10   ` [PATCH 07/15] ARM: at91: move SoC specific definitions to SoC folder Daniel Lezcano
2019-05-09 11:10   ` [PATCH 08/15] clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib Daniel Lezcano
2019-05-09 11:10   ` [PATCH 09/15] clocksource/drivers/tcb_clksrc: Use tcb as sched_clock Daniel Lezcano
2019-05-09 11:10   ` [PATCH 10/15] ARM: at91: Implement clocksource selection Daniel Lezcano
2019-05-09 11:10   ` [PATCH 11/15] clocksource/drivers/tcb_clksrc: Move Kconfig option Daniel Lezcano
2019-05-09 11:10   ` [PATCH 12/15] clocksource/drivers/timer-atmel-pit: Rework " Daniel Lezcano
2019-05-09 11:10   ` [PATCH 13/15] clocksource/drivers/tcb_clksrc: Rename the file for consistency Daniel Lezcano
2019-05-09 11:10   ` [PATCH 14/15] clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static Daniel Lezcano
2019-05-09 11:10   ` [PATCH 15/15] misc: atmel_tclib: Do not probe already used TCBs Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190509111048.11151-3-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=jonathanh@nvidia.com \
    --cc=josephl@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®