mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: <lgirdwood@gmail.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <patches@opensource.cirrus.com>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH 2/3] regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs
Date: Tue, 21 May 2019 11:04:38 +0100	[thread overview]
Message-ID: <20190521100439.27383-2-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20190521100439.27383-1-ckeepax@opensource.cirrus.com>

From: Richard Fitzgerald <rf@opensource.cirrus.com>

This adds a new driver identity "madera-ldo1" and probe function
so that this driver can be used to control the LDO1 regulator on
some Cirrus Logic Madera codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 drivers/regulator/Kconfig        |  8 ++--
 drivers/regulator/arizona-ldo1.c | 83 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 86 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6c37f0df93232..d2db658840f47 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -135,12 +135,12 @@ config REGULATOR_AB8500
 	  signal AB8500 PMIC
 
 config REGULATOR_ARIZONA_LDO1
-	tristate "Wolfson Arizona class devices LDO1"
-	depends on MFD_ARIZONA
+	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
+	depends on MFD_ARIZONA || MFD_MADERA
 	depends on SND_SOC
 	help
-	  Support for the LDO1 regulators found on Wolfson Arizona class
-	  devices.
+	  Support for the LDO1 regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Microelectronic Arizona codecs.
 
 config REGULATOR_ARIZONA_MICSUPP
 	tristate "Wolfson Arizona class devices MICSUPP"
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index e4bc7b1e5ccdd..1a3d7b720f5e0 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -25,6 +25,10 @@
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
 
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/mfd/madera/registers.h>
+
 struct arizona_ldo1 {
 	struct regulator_dev *regulator;
 	struct regmap *regmap;
@@ -158,6 +162,31 @@ static const struct regulator_init_data arizona_ldo1_wm5110 = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_desc madera_ldo1 = {
+	.name = "LDO1",
+	.supply_name = "LDOVDD",
+	.type = REGULATOR_VOLTAGE,
+	.ops = &arizona_ldo1_ops,
+
+	.vsel_reg = MADERA_LDO1_CONTROL_1,
+	.vsel_mask = MADERA_LDO1_VSEL_MASK,
+	.min_uV = 900000,
+	.uV_step = 25000,
+	.n_voltages = 13,
+	.enable_time = 3000,
+
+	.owner = THIS_MODULE,
+};
+
+static const struct regulator_init_data madera_ldo1_default = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+};
+
 static int arizona_ldo1_of_get_pdata(struct arizona_ldo1_pdata *pdata,
 				     struct regulator_config *config,
 				     const struct regulator_desc *desc,
@@ -320,6 +349,32 @@ static int arizona_ldo1_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int madera_ldo1_probe(struct platform_device *pdev)
+{
+	struct madera *madera = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_ldo1 *ldo1;
+	bool external_dcvdd;
+	int ret;
+
+	ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
+	if (!ldo1)
+		return -ENOMEM;
+
+	ldo1->regmap = madera->regmap;
+
+	ldo1->init_data = madera_ldo1_default;
+
+	ret = arizona_ldo1_common_init(pdev, ldo1, &madera_ldo1,
+				       &madera->pdata.ldo1,
+				       &external_dcvdd);
+	if (ret)
+		return ret;
+
+	madera->internal_dcvdd = !external_dcvdd;
+
+	return 0;
+}
+
 static struct platform_driver arizona_ldo1_driver = {
 	.probe = arizona_ldo1_probe,
 	.remove = arizona_ldo1_remove,
@@ -328,10 +383,36 @@ static struct platform_driver arizona_ldo1_driver = {
 	},
 };
 
-module_platform_driver(arizona_ldo1_driver);
+static struct platform_driver madera_ldo1_driver = {
+	.probe = madera_ldo1_probe,
+	.remove = arizona_ldo1_remove,
+	.driver		= {
+		.name	= "madera-ldo1",
+	},
+};
+
+static struct platform_driver * const madera_ldo1_drivers[] = {
+	&arizona_ldo1_driver,
+	&madera_ldo1_driver,
+};
+
+static int __init arizona_ldo1_init(void)
+{
+	return platform_register_drivers(madera_ldo1_drivers,
+					 ARRAY_SIZE(madera_ldo1_drivers));
+}
+module_init(arizona_ldo1_init);
+
+static void __exit madera_ldo1_exit(void)
+{
+	platform_unregister_drivers(madera_ldo1_drivers,
+				    ARRAY_SIZE(madera_ldo1_drivers));
+}
+module_exit(madera_ldo1_exit);
 
 /* Module information */
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Arizona LDO1 driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:arizona-ldo1");
+MODULE_ALIAS("platform:madera-ldo1");
-- 
2.11.0


  reply	other threads:[~2019-05-21 10:04 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-21 10:04 [PATCH 1/3] regulator: arizona: Update device tree binding to support Madera CODECs Charles Keepax
2019-05-21 10:04 ` Charles Keepax [this message]
2019-05-21 20:32   ` Applied "regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs" to the regulator tree Mark Brown
2019-05-21 10:04 ` [PATCH 3/3] regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs Charles Keepax
2019-05-21 20:32   ` Applied "regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs" to the regulator tree Mark Brown
2019-05-21 20:33 ` Applied "regulator: arizona: Update device tree binding to support Madera CODECs" " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190521100439.27383-2-ckeepax@opensource.cirrus.com \
    --to=ckeepax@opensource.cirrus.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=patches@opensource.cirrus.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®