From: Paul Cercueil <paul@crapouillou.net>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Jason Cooper <jason@lakedaemon.net>,
Marc Zyngier <marc.zyngier@arm.com>,
Lee Jones <lee.jones@linaro.org>
Cc: Mathieu Malaterre <malat@debian.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-mips@vger.kernel.org, linux-doc@vger.kernel.org,
linux-clk@vger.kernel.org, od@zcrc.me,
Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v12 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers
Date: Tue, 21 May 2019 16:51:37 +0200 [thread overview]
Message-ID: <20190521145141.9813-10-paul@crapouillou.net> (raw)
In-Reply-To: <20190521145141.9813-1-paul@crapouillou.net>
Add DTS nodes for the JZ4780, JZ4770 and JZ4740 devicetree files.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Notes:
v5: New patch
v6: Fix register lengths in watchdog/pwm nodes
v7: No change
v8: - Fix wrong start address for PWM node
- Add system timer and clocksource sub-nodes
v9: Drop timer and clocksource sub-nodes
v10-v11: No change
v12: Drop PWM/watchdog/OST sub-nodes, for now.
arch/mips/boot/dts/ingenic/jz4740.dtsi | 22 ++++++++++++++++++++++
arch/mips/boot/dts/ingenic/jz4770.dtsi | 21 +++++++++++++++++++++
arch/mips/boot/dts/ingenic/jz4780.dtsi | 21 +++++++++++++++++++++
3 files changed, 64 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 2beb78a62b7d..807d9702d4cf 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -53,6 +53,28 @@
clock-names = "rtc";
};
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4740-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4740_CLK_RTC
+ &cgu JZ4740_CLK_EXT
+ &cgu JZ4740_CLK_PCLK
+ &cgu JZ4740_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <23 22 21>;
+ };
+
rtc_dev: rtc@10003000 {
compatible = "ingenic,jz4740-rtc";
reg = <0x10003000 0x40>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 49ede6c14ff3..70932fd90902 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -46,6 +46,27 @@
#clock-cells = <1>;
};
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC
+ &cgu JZ4770_CLK_EXT
+ &cgu JZ4770_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+ };
+
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4770-pinctrl";
reg = <0x10010000 0x600>;
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b03cdec56de9..495082ce7fc5 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -46,6 +46,27 @@
#clock-cells = <1>;
};
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4780_CLK_RTCLK
+ &cgu JZ4780_CLK_EXCLK
+ &cgu JZ4780_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+ };
+
rtc_dev: rtc@10003000 {
compatible = "ingenic,jz4780-rtc";
reg = <0x10003000 0x4c>;
--
2.21.0.593.g511ec345e18
next prev parent reply other threads:[~2019-05-21 14:52 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 14:51 Ingenic Timer/Counter Unit (TCU) patchset v12 Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 01/13] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 02/13] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 03/13] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2019-05-24 20:21 ` Rob Herring
2019-05-25 19:13 ` Paul Cercueil
2019-06-11 14:57 ` Rob Herring
2019-05-21 14:51 ` [PATCH v12 04/13] mfd: Add Ingenic TCU driver Paul Cercueil
2019-06-22 12:21 ` Paul Cercueil
2019-06-26 13:18 ` Lee Jones
2019-06-26 13:55 ` Paul Cercueil
2019-06-27 6:58 ` Lee Jones
2019-06-27 8:49 ` Paul Cercueil
2019-06-27 9:01 ` Lee Jones
2019-06-27 9:19 ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 05/13] clk: ingenic: Add driver for the TCU clocks Paul Cercueil
2019-06-07 21:28 ` Stephen Boyd
2019-06-07 21:59 ` Paul Cercueil
2019-06-07 22:50 ` Stephen Boyd
2019-05-21 14:51 ` [PATCH v12 06/13] irqchip: Add irq-ingenic-tcu driver Paul Cercueil
2019-06-22 12:22 ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 07/13] clocksource: Add a new timer-ingenic driver Paul Cercueil
2019-06-22 12:23 ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 08/13] clk: jz4740: Add TCU clock Paul Cercueil
2019-05-21 14:51 ` Paul Cercueil [this message]
2019-05-22 9:21 ` [PATCH v12 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers Mathieu Malaterre
2019-05-22 11:15 ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 10/13] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 11/13] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 12/13] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 13/13] MIPS: jz4740: Drop obsolete code Paul Cercueil
2019-05-27 11:39 ` Ingenic Timer/Counter Unit (TCU) patchset v12 Mathieu Malaterre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190521145141.9813-10-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=jhogan@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=malat@debian.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=od@zcrc.me \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®