From: Raul E Rangel <rrangel@chromium.org>
To: enric.balletbo@collabora.com, ncrews@chromium.org
Cc: Raul E Rangel <rrangel@chromium.org>,
Simon Glass <sjg@chromium.org>,
Guenter Roeck <groeck@chromium.org>,
linux-kernel@vger.kernel.org, Benson Leung <bleung@chromium.org>,
Daniel Kurtz <djkurtz@chromium.org>,
Olof Johansson <olof@lixom.net>,
Sean Paul <seanpaul@chromium.org>
Subject: [PATCH] platform/chrome: wilco_ec: Add version sysfs entries
Date: Tue, 21 May 2019 09:15:19 -0600 [thread overview]
Message-ID: <20190521151519.158273-1-rrangel@chromium.org> (raw)
Add the ability to extract version information from the EC.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---
This patch is rebased on platform/chrome: wilco_ec: Add Boot on AC support.
https://lkml.org/lkml/2019/4/16/1374
That patch wasn't in the for-next branch, so I'm not 100% sure if it
applies cleanly to for-next.
Example Output:
/sys/bus/platform/devices/GOOG000C:00/version # tail *
==> build_date <==
04/25/19
==> build_revision <==
d2592cae0
==> label <==
00.00.14
==> model_number <==
08B6
.../ABI/testing/sysfs-platform-wilco-ec | 33 +++++++
drivers/platform/chrome/wilco_ec/sysfs.c | 97 ++++++++++++++++++-
2 files changed, 128 insertions(+), 2 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec
index 6694df8d4172f..00bc8e7c3b9c2 100644
--- a/Documentation/ABI/testing/sysfs-platform-wilco-ec
+++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec
@@ -102,3 +102,36 @@ KernelVersion: 5.3
Description:
Read or write the battery percentage threshold for which the
peak shift policy is used. The valid range is [15, 100].
+
+What: /sys/bus/platform/devices/GOOG000C\:00/version/label
+Date: May 2019
+KernelVersion: 5.3
+Description:
+ Display Wilco Embedded Controller firmware version label.
+ Output will a version string be similar to the example below:
+ 95.00.06
+
+What: /sys/bus/platform/devices/GOOG000C\:00/version/build_revision
+
+Date: May 2019
+KernelVersion: 5.3
+Description:
+ Display Wilco Embedded Controller build revision.
+ Output will a version string be similar to the example below:
+ d2592cae0
+
+What: /sys/bus/platform/devices/GOOG000C\:00/version/model_number
+
+Date: May 2019
+KernelVersion: 5.3
+Description:
+ Display Wilco Embedded Controller model number.
+ Output will a version string be similar to the example below:
+ 08B6
+
+What: /sys/bus/platform/devices/GOOG000C\:00/version/build_date
+Date: May 2019
+KernelVersion: 5.3
+Description:
+ Display Wilco Embedded Controller firmware build date.
+ Output will a MM/DD/YY string.
diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c
index 6573a6cf9cb31..9bfb9dfde73d1 100644
--- a/drivers/platform/chrome/wilco_ec/sysfs.c
+++ b/drivers/platform/chrome/wilco_ec/sysfs.c
@@ -43,6 +43,25 @@ struct usb_power_share_response {
u8 val; /* When getting, set by EC to either 0 or 1 */
} __packed;
+#define CMD_EC_INFO 0x38
+enum get_ec_info_op {
+ CMD_GET_EC_LABEL = 0,
+ CMD_GET_EC_REV = 1,
+ CMD_GET_EC_MODEL = 2,
+ CMD_GET_EC_BUILD_DATE = 3,
+};
+
+struct get_ec_info_req {
+ u8 cmd; /* Always CMD_EC_INFO */
+ u8 reserved;
+ u8 op; /* One of enum get_ec_info_op */
+} __packed;
+
+struct get_ec_info_resp {
+ u8 reserved[2];
+ char value[9]; /* __nonstring: might not be null terminated */
+} __packed;
+
static ssize_t boot_on_ac_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -158,12 +177,86 @@ static struct attribute_group wilco_dev_attr_group = {
.attrs = wilco_dev_attrs,
};
+static ssize_t get_info(struct device *dev, char *buf, enum get_ec_info_op op)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(dev);
+ struct get_ec_info_req req = { .cmd = CMD_EC_INFO, .op = op };
+ struct get_ec_info_resp resp;
+ int ret;
+
+ struct wilco_ec_message msg = {
+ .type = WILCO_EC_MSG_LEGACY,
+ .request_data = &req,
+ .request_size = sizeof(req),
+ .response_data = &resp,
+ .response_size = sizeof(resp),
+ };
+
+ ret = wilco_ec_mailbox(ec, &msg);
+ if (ret < 0)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%.*s\n", (int)sizeof(resp.value),
+ (char *)&resp.value);
+}
+
+static ssize_t label_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return get_info(dev, buf, CMD_GET_EC_LABEL);
+}
+
+static DEVICE_ATTR_RO(label);
+
+static ssize_t build_revision_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return get_info(dev, buf, CMD_GET_EC_REV);
+}
+
+static DEVICE_ATTR_RO(build_revision);
+
+static ssize_t build_date_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return get_info(dev, buf, CMD_GET_EC_BUILD_DATE);
+}
+
+static DEVICE_ATTR_RO(build_date);
+
+static ssize_t model_number_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return get_info(dev, buf, CMD_GET_EC_MODEL);
+}
+
+static DEVICE_ATTR_RO(model_number);
+
+static struct attribute *wilco_version_attrs[] = {
+ &dev_attr_label.attr,
+ &dev_attr_build_revision.attr,
+ &dev_attr_build_date.attr,
+ &dev_attr_model_number.attr,
+ NULL,
+};
+
+static struct attribute_group wilco_version_group = {
+ .name = "version",
+ .attrs = wilco_version_attrs,
+};
+
+static const struct attribute_group *wilco_dev_attr_groups[] = {
+ &wilco_dev_attr_group,
+ &wilco_version_group,
+ NULL
+};
+
int wilco_ec_add_sysfs(struct wilco_ec_device *ec)
{
- return sysfs_create_group(&ec->dev->kobj, &wilco_dev_attr_group);
+ return sysfs_create_groups(&ec->dev->kobj, wilco_dev_attr_groups);
}
void wilco_ec_remove_sysfs(struct wilco_ec_device *ec)
{
- sysfs_remove_group(&ec->dev->kobj, &wilco_dev_attr_group);
+ sysfs_remove_groups(&ec->dev->kobj, wilco_dev_attr_groups);
}
--
2.21.0.1020.gf2820cf01a-goog
next reply other threads:[~2019-05-21 15:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 15:15 Raul E Rangel [this message]
2019-05-24 0:15 ` Nick Crews
2019-06-03 17:12 ` Enric Balletbo i Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190521151519.158273-1-rrangel@chromium.org \
--to=rrangel@chromium.org \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=groeck@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ncrews@chromium.org \
--cc=olof@lixom.net \
--cc=seanpaul@chromium.org \
--cc=sjg@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®