mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: "Florian Fainelli" <f.fainelli@gmail.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Ray Jui" <rjui@broadcom.com>,
	"Scott Branden" <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM IPROC
	ARM ARCHITECTURE), "Hauke Mehrtens" <hauke@hauke-m.de>,
	"Rafał Miłecki" <zajec5@gmail.com>,
	"Brian Norris" <computersforpeace@gmail.com>,
	"Gregory Fong" <gregory.0xf0@gmail.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 2/7] ARM: dts: Cygnus: Fix most DTC W=1 warnings
Date: Tue, 28 May 2019 16:01:29 -0700	[thread overview]
Message-ID: <20190528230134.27007-3-f.fainelli@gmail.com> (raw)
In-Reply-To: <20190528230134.27007-1-f.fainelli@gmail.com>

Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 12 ++++++------
 arch/arm/boot/dts/bcm-cygnus.dtsi       |  6 +++---
 arch/arm/boot/dts/bcm911360_entphn.dts  |  2 --
 3 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
index 80b6ba4ca50c..52f91a12a99a 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -42,7 +42,7 @@ clocks {
 	};
 
 	/* Cygnus ARM PLL */
-	armpll: armpll {
+	armpll: armpll@19000000 {
 		#clock-cells = <0>;
 		compatible = "brcm,cygnus-armpll";
 		clocks = <&osc>;
@@ -67,7 +67,7 @@ clocks {
 		clock-mult = <1>;
 	};
 
-	genpll: genpll {
+	genpll: genpll@301d000 {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-genpll";
 		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
@@ -94,7 +94,7 @@ clocks {
 		clock-mult = <1>;
 	};
 
-	lcpll0: lcpll0 {
+	lcpll0: lcpll0@301d02c {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-lcpll0";
 		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
@@ -103,7 +103,7 @@ clocks {
 				     "usb_phy", "smart_card", "ch5";
 	};
 
-	mipipll: mipipll {
+	mipipll: mipipll@180a9800 {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-mipipll";
 		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
@@ -113,7 +113,7 @@ clocks {
 				     "ch5_unused";
 	};
 
-	asiu_clks: asiu_clks {
+	asiu_clks: asiu_clks@301d048 {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-asiu-clk";
 		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
@@ -122,7 +122,7 @@ clocks {
 		clock-output-names = "keypad", "adc/touch", "pwm";
 	};
 
-	audiopll: audiopll {
+	audiopll: audiopll@180aeb00 {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-audiopll";
 		reg = <0x180aeb00 0x68>;
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 5f7b46503a51..2dac3efc7640 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -45,7 +45,7 @@
 		ethernet0 = &eth0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0>;
 	};
@@ -69,7 +69,7 @@
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	core {
+	core@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x1000000>;
 		#address-cells = <1>;
@@ -91,7 +91,7 @@
 			      <0x20100 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: l2-cache@22000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x22000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 53f990defd6a..b2d323f4a5ab 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -49,8 +49,6 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		hook {
 			label = "HOOK";
-- 
2.17.1


  parent reply	other threads:[~2019-05-28 23:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-28 23:01 [PATCH 0/7] ARM: dts: Broadcom: Fix W=1 DTC warnings Florian Fainelli
2019-05-28 23:01 ` [PATCH 1/7] ARM: dts: Fix BCM7445 " Florian Fainelli
2019-06-11 21:53   ` Florian Fainelli
2019-05-28 23:01 ` Florian Fainelli [this message]
2019-06-11 21:54   ` [PATCH 2/7] ARM: dts: Cygnus: Fix most DTC W=1 warnings Florian Fainelli
2019-05-28 23:01 ` [PATCH 3/7] ARM: dts: bcm-mobile: " Florian Fainelli
2019-06-11 21:54   ` Florian Fainelli
2019-05-28 23:01 ` [PATCH 4/7] ARM: dts: BCM53573: Fix " Florian Fainelli
2019-06-11 21:54   ` Florian Fainelli
2019-05-28 23:01 ` [PATCH 5/7] ARM: dts: BCM63xx: " Florian Fainelli
2019-06-11 21:56   ` Florian Fainelli
2019-05-28 23:01 ` [PATCH 6/7] ARM: dts: BCM5301X: Fix most " Florian Fainelli
2019-06-11 22:08   ` Florian Fainelli
2019-05-28 23:01 ` [PATCH 7/7] ARM: dts: NSP: Fix the bulk of W=1 DTC warnings Florian Fainelli
2019-06-11 21:58   ` Florian Fainelli
2019-05-30 10:12 ` [PATCH 0/7] ARM: dts: Broadcom: Fix " Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190528230134.27007-3-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.0xf0@gmail.com \
    --cc=hauke@hauke-m.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sbranden@broadcom.com \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome