mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-kbuild@vger.kernel.org
Cc: Randy Dunlap <rdunlap@infradead.org>,
	Arnd Bergmann <arnd@arndb.de>,
	David Howells <dhowells@redhat.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Jani Nikula <jani.nikula@intel.com>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jonathan Corbet <corbet@lwn.net>,
	Michal Marek <michal.lkml@markovi.net>
Subject: [PATCH 01/15] kbuild: remove headers_{install,check}_all
Date: Tue,  4 Jun 2019 19:13:55 +0900	[thread overview]
Message-ID: <20190604101409.2078-2-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <20190604101409.2078-1-yamada.masahiro@socionext.com>

headers_install_all does not make much sense any more because different
architectures export different set of uapi/linux/ headers. As you see
in include/uapi/linux/Kbuild, the installation of a.out.h, kvm.h, and
kvm_para.h is arch-dependent. So, headers_install_all repeats the
installation/removal of them.

If somebody really thinks it is useful to do headers_install for all
architectures, it would be possible by small shell-scripting, but the
top Makefile do not have to provide entry targets just for that purpose.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 Documentation/kbuild/headers_install.txt |  7 ------
 Documentation/kbuild/makefiles.txt       |  6 +----
 Makefile                                 | 15 ++----------
 scripts/headers.sh                       | 29 ------------------------
 4 files changed, 3 insertions(+), 54 deletions(-)
 delete mode 100755 scripts/headers.sh

diff --git a/Documentation/kbuild/headers_install.txt b/Documentation/kbuild/headers_install.txt
index f0153adb95e2..f07e34eab70b 100644
--- a/Documentation/kbuild/headers_install.txt
+++ b/Documentation/kbuild/headers_install.txt
@@ -39,12 +39,5 @@ INSTALL_HDR_PATH indicates where to install the headers. It defaults to
 An 'include' directory is automatically created inside INSTALL_HDR_PATH and
 headers are installed in 'INSTALL_HDR_PATH/include'.
 
-The command "make headers_install_all" exports headers for all architectures
-simultaneously.  (This is mostly of interest to distribution maintainers,
-who create an architecture-independent tarball from the resulting include
-directory.)  You also can use HDR_ARCH_LIST to specify list of architectures.
-Remember to provide the appropriate linux/asm directory via "mv" or "ln -s"
-before building a C library with headers exported this way.
-
 The kernel header export infrastructure is maintained by David Woodhouse
 <dwmw2@infradead.org>.
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index d65ad5746f94..bac301a73a86 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -897,11 +897,7 @@ When kbuild executes, the following steps are followed (roughly):
 --- 6.2 Add prerequisites to archheaders:
 
 	The archheaders: rule is used to generate header files that
-	may be installed into user space by "make header_install" or
-	"make headers_install_all".  In order to support
-	"make headers_install_all", this target has to be able to run
-	on an unconfigured tree, or a tree configured for another
-	architecture.
+	may be installed into user space by "make header_install".
 
 	It is run before "make archprepare" when run on the
 	architecture itself.
diff --git a/Makefile b/Makefile
index 004d67a4405f..7745bdd84861 100644
--- a/Makefile
+++ b/Makefile
@@ -1181,34 +1181,23 @@ headerdep:
 #Default location for installed headers
 export INSTALL_HDR_PATH = $(objtree)/usr
 
-# If we do an all arch process set dst to include/arch-$(SRCARCH)
-hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(SRCARCH), dst=include)
-
 PHONY += archheaders archscripts
 
 PHONY += __headers
 __headers: $(version_h) scripts_basic uapi-asm-generic archheaders archscripts
 	$(Q)$(MAKE) $(build)=scripts build_unifdef
 
-PHONY += headers_install_all
-headers_install_all:
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
-
 PHONY += headers_install
 headers_install: __headers
 	$(if $(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/Kbuild),, \
 	  $(error Headers not exportable for the $(SRCARCH) architecture))
 	$(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include
-	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi $(hdr-dst)
-
-PHONY += headers_check_all
-headers_check_all: headers_install_all
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi dst=include
 
 PHONY += headers_check
 headers_check: headers_install
 	$(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include HDRCHECK=1
-	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi $(hdr-dst) HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi dst=include HDRCHECK=1
 
 ifdef CONFIG_HEADERS_CHECK
 all: headers_check
diff --git a/scripts/headers.sh b/scripts/headers.sh
deleted file mode 100755
index e0f883eb39a2..000000000000
--- a/scripts/headers.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-# Run headers_$1 command for all suitable architectures
-
-# Stop on error
-set -e
-
-do_command()
-{
-	if [ -f ${srctree}/arch/$2/include/asm/Kbuild ]; then
-		make ARCH=$2 KBUILD_HEADERS=$1 headers_$1
-	else
-		printf "Ignoring arch: %s\n" ${arch}
-	fi
-}
-
-archs=${HDR_ARCH_LIST:-$(ls ${srctree}/arch)}
-
-for arch in ${archs}; do
-	case ${arch} in
-	um)        # no userspace export
-		;;
-	*)
-		if [ -d ${srctree}/arch/${arch} ]; then
-			do_command $1 ${arch}
-		fi
-		;;
-	esac
-done
-- 
2.17.1


  reply	other threads:[~2019-06-04 10:15 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-04 10:13 [PATCH 00/15] kbuild: refactor headers_install and support compile-test of UAPI headers Masahiro Yamada
2019-06-04 10:13 ` Masahiro Yamada [this message]
2019-06-04 17:57   ` [PATCH 01/15] kbuild: remove headers_{install,check}_all Sam Ravnborg
2019-06-04 10:13 ` [PATCH 02/15] kbuild: remove stale dependency between Documentation/ and headers_install Masahiro Yamada
2019-06-04 10:13 ` [PATCH 03/15] kbuild: make gdb_script depend on prepare0 instead of prepare Masahiro Yamada
2019-06-04 10:13 ` [PATCH 04/15] kbuild: fix Kconfig prompt of CONFIG_HEADERS_CHECK Masahiro Yamada
2019-06-04 10:13 ` [PATCH 05/15] kbuild: add CONFIG_HEADERS_INSTALL and loosen the dependency of samples Masahiro Yamada
2019-06-04 10:14 ` [PATCH 06/15] kbuild: remove build_unifdef target in scripts/Makefile Masahiro Yamada
2019-06-04 10:14 ` [PATCH 07/15] kbuild: build all prerequisite of headers_install simultaneously Masahiro Yamada
2019-06-04 10:14 ` [PATCH 08/15] kbuild: add 'headers' target to build up ready-to-install uapi headers Masahiro Yamada
2019-06-04 10:14 ` [PATCH 09/15] kbuild: re-implement Makefile.headersinst without directory descending Masahiro Yamada
2019-06-04 10:14 ` [PATCH 10/15] kbuild: move hdr-inst shorthand to top Makefile Masahiro Yamada
2019-06-04 10:14 ` [PATCH 11/15] kbuild: simplify scripts/headers_install.sh Masahiro Yamada
2019-06-04 10:14 ` [PATCH 12/15] kbuild: deb-pkg: do not run headers_check Masahiro Yamada
2019-06-04 10:14 ` [PATCH 13/15] kbuild: add support for ensuring headers are self-contained Masahiro Yamada
2019-06-04 12:42   ` [PATCH v2] " Jani Nikula
2019-06-04 17:25     ` Sam Ravnborg
2019-06-18 15:45       ` Masahiro Yamada
2019-06-04 10:14 ` [PATCH 14/15] fixup: " Masahiro Yamada
2019-06-04 12:53   ` Jani Nikula
2019-06-04 10:14 ` [PATCH 15/15] kbuild: compile test UAPI headers to ensure they " Masahiro Yamada
2019-06-21 19:05   ` Arnd Bergmann
2019-06-22  5:12     ` Masahiro Yamada
2019-06-22  5:39       ` Masahiro Yamada
2019-06-05  2:37 ` [PATCH 00/15] kbuild: refactor headers_install and support compile-test of UAPI headers Masahiro Yamada
2019-06-18 15:46 ` Masahiro Yamada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190604101409.2078-2-yamada.masahiro@socionext.com \
    --to=yamada.masahiro@socionext.com \
    --cc=arnd@arndb.de \
    --cc=corbet@lwn.net \
    --cc=dhowells@redhat.com \
    --cc=jani.nikula@intel.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kbuild@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.lkml@markovi.net \
    --cc=rdunlap@infradead.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®